• The Korean Journal of Nuclear Medicine
• /
• v.24 no.1
• /
• pp.49-55
• /
• 1990

For the development of $^{99m}Tc-labelled$ 3-iodo-2,4,6-trimethyl-iminodiacetic acid $(^{99m}Tc-IOTIDA)$, various experiments such as synthesis of IOTIDA, establishment of labelling conditions, determination of radiochemical purity, examination of stability, and organ distribution of rat were carried out. 1) IOTIDA was synthesized with a total yield of 42% from the starting material of 2,4-6-trimethylaniline via chloroacetylation, iodination, and condensation with iminodiacetic acid (IDA). 2) Freeze-dried instant labelling kits were prepared from aqueous solution $(pH\;5.8\sim6.0)$ so as to contain 40 mg IDA compound and 0.4 mg $SnCl_2$, per vial. Labelling of the contents of kit vials with $Na^{99m}TcO_4$, exhibited formation of two kinds of complex which was identified by ITLC-SA. After labelling, complex ( I ) was gradually converted to complex (II) with time. Labelling yield and radiochemical purity were above 99.5% based on the two complexes over-all. 3) $^{99m}Tc-IOTIDA$ maintained high radiochemical purity of above 99% until 6 hours after preparation at room temperature. Instant labelling kits stored at $4^{\circ}C$ for 6 month period also exhibited high labelling yield of above 99%. 4) Results obtained from animal experiments showed that most of the $^{99m}Tc-IOTIDA$ was rapidly excreted through hepatobiliary track into the intestines but with negligible renal excretion.

• The Korean Journal of Food And Nutrition
• /
• v.30 no.5
• /
• pp.853-859
• /
• 2017

This study was conducted in an effort to investigate the effect of Maillard reaction products (MRPs) on enzymatic browning of burdock and their anti-oxidant activity. The MRPs were prepared by heating glucose and amino acids at $90^{\circ}C$, which served to produce a strong inhibitory effect on burdock polyphenol oxidase. As the reaction time of the solution containing glucose and amino acid increased at $90^{\circ}C$, the production of MRPs increased and intensity of the brown color deepened. When MRPs were prepared by heating at $90^{\circ}C$ for five hours, the absorbance of MRPs from glucose and lysine was 6.44, while those of glucose and glycine was 1.95. The MRPs synthesized from the glucose and lysine also reduced the pH of MRPs from 5.60 to 4.51, but those from glucose and glycine decreased slightly from 5.57 to 5.33. The Michealis-Menten constant value ($K_m$) of burdock PPO with pyrocatechol as a substrate was 16.0 mM, and MRPs were a non-competitive inhibitor against burdock PPO. The anti-oxidant activity of MRPs was measured by evaluating its radical scavenging activities of DPPH radicals, ABTS radicals and reducing power. The color intensity of MRPs produced by lysine and glucose were deeper than that produced by glucose and glycine. It was also found that MRPs produced from glucose and lysine exhibited stronger anti-oxidant properties than those produced by glucose and glycine.

• Membrane and Water Treatment
• /
• v.9 no.2
• /
• pp.95-104
• /
• 2018

Copper pollution around the world has caused serious public health problems recently. The heavy metal adsorption on traditional membranes from wastewater is limited by material properties. Different adsorptive materials are embedded in the membrane matrix and act as the adsorbent for the heavy metal. The carbonized leaf powder has been proven as an effective adsorbent material in removing aqueous Cu(II) because of its relative high specific surface area and inherent beneficial groups such as amine, carboxyl and phosphate after carbonization process. Factors affecting the adsorption of Cu(II) include: adsorbent dosage, initial Cu(II) concentration, solution pH, temperature and duration. The kinetics data fit well with the pseudo-first order kinetics and the pseudo-second order kinetics model. The thermodynamic behavior reveals the endothermic and spontaneous nature of the adsorption. The adsorption isotherm curve fits Sips model well, and the adsorption capacity was determined at 61.77 mg/g. Based on D-R model, the adsorption was predominated by the form of physical adsorption under lower temperatures, while the increased temperature motivated the form of chemical adsorption such as ion-exchange reaction. According to the analysis towards the mechanism, the chemical adsorption process occurs mainly among amine, carbonate, phosphate and copper ions or other surface adsorption. This hypothesis is confirmed by FT-IR test and XRD spectra as well as the predicted parameters calculated based on D-R model.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.1
• /
• pp.98-103
• /
• 1998

The crystal structure of dehydrated $Rb^+$-exchanged zeolite X, stoichiometry $Rb_{71}Na_{21}-X\; (Rb_{71}Na_{21}Si_{100}Al_{92}O_{384})$ per unit cell, has been determined from single-crystal X-ray diffraction date gathered by counter methods. The structure was solved and refined in the cubic space group Fd3, a=25.007(3) Å at 21(1) ℃. The crystal was prepared by ion exchange in a flowing stream using a 0.05 M aqueous RbOH solution (pH=12.7). The crystal was then dehydrated at 360 ℃ and $2{\times}10^{-6}$ torr for two days. The structure was refined to the final error indices, $R_1=0.047$ and $R_2=0.040$ with 239 reflections for which I> 3σ(I). In this structure, 71 $Rb^+$ ions per unit cell are found at six different crystallographic sites and 21 $Na^+$ ions per unit cell are found at two different crystallographic sites. Four and a half $Rb^+$ ions are located at site Ⅰ, the center of the hexagonal prism. Nine $Rb^+$ ions are found at site Ⅰ' in the sodalite cavity (Rb-O=2.910(15) Å and O-Rb-O=78.1(4)°). Eighteen $Rb^+$ ions are found at site Ⅱ in the supercage (Rb-O=2.789(9) Å and O-Rb-O=92.1(4)°). Two and a half $Rb^+$ ions, which lie at site Ⅱ', are recessed ca. 2.07 Å into the sodalite cavity from their three O(2) oxygen planes (Rb-O=3.105(37) Å and O-Rb-O=80.6(5)°). Thirty-two $Rb^+$ ions are found at site Ⅲ deep in the supercage (Rb-O=2.918(12) Å and O-Rb-O=71.9(4)°), and five $Rb^+$ ions are found at site Ⅲ'. Seven $Na^+$ ions also lie at site Ⅰ. Fourteen $Na^+$ ions are found at site Ⅱ in the supercage (Na-O=2.350(19) Å and O-Na-O=117.5(6)°).

• Journal of the Korean institute of surface engineering
• /
• v.52 no.5
• /
• pp.265-274
• /
• 2019

Formation behavior of PEO (Plasma Electrolytic Oxidation) films on AZ31 Mg alloy was investigated under application of 310 Hz AC as a function of $Na_3PO_4$ concentration from 0.02 M to 0.2 M. Film formation voltage and in-situ observation of arcs generated on the specimen surface were recorded with time, and surface morphologies of the PEO films were investigated using optical microscopy, confocal scanning laser microscopy and scanning electron microscopy. PEO film formation voltage decreased linearly with increasing $Na_3PO_4$ concentration which is attributed to the increase of solution pH. PEO films were grown uniformly over the entire surface in $Na_3PO_4$ solutions between 0.05 M and 0.1 M. However, non-uniform PEO films with white spots were formed in $Na_3PO_4$ solutions containing more than 0.1 M. Thickness and roughness of PEO films on AZ31 Mg alloy increased linearly with increasing $Na_3PO_4$ concentration and their increasing rates appeared to be much higher under 1 M than above 1 M. The experimental results suggest that phosphate ions can contribute to the formation of PEO films but higher $Na_3PO_4$ concentration more than 1 M results in local damages of PEO films due to repeated generation of white arcs at the same surface site of AZ31 Mg alloy.

• Geomechanics and Engineering
• /
• v.7 no.2
• /
• pp.183-200
• /
• 2014

The expansivity of clayey soils is a complicated phenomenon which may affect the stability of geotechnical structures and geo-environmental projects. In all common factors for the monitoring of soil expansion, less attention is given to anion type of pore space solutions. Therefore, this paper is concerned with the impact of various concentrations of different inorganic salts including NaCl, $Na_2SO_4$, and $Na_2CO_3$ on the macro and microstructure behavior of the expandable smectite clay. Comparison of the responses of the smectite/NaCl and smectite/$Na_2SO_4$ mixtures indicates that the effect of anion valance on the soil engineering properties is not very pronounced, regardless of the electrolyte concentration. However, at presence of carbonate as potential determining ions (PDIs) the swelling power increases up to 1.5 times compared to sulfate or chloride ions. The samples with $Na_2CO_3$ are also more deformable and show lower osmotic compressibility than the other mixtures. This demonstrates that the barrier performance of smectite greatly decreases in case of anions with the non-specific adsorption (e.g., $Cl^-$ and $SO{_4}^{2-}$) as the salinity of solution increases. Based on the results of the X-ray diffraction and sedimentation tests, the high soil volumetric changes upon exposure to carbonate is attributed to an increase in the repulsive forces between smectite basic unit layers due to the PDI effect of $CO{_3}^{2-}$ and increasing the pH level which enhance the buffering capacity of smectite. The study concluded that the nature of anion through its influence on the re-arrangement of soil microstructure and osmotic phenomena governs the hydro-mechanical parameters of expansive clays. It seems not coinciding with the double layer theory of the Gouy-Chapman double layer model.

• Korean Journal of Agricultural Science
• /
• v.48 no.3
• /
• pp.567-574
• /
• 2021

In this study, we evaluated the wound healing rate and, inflammatory cells effects of by Abeliophyllum distichum Nakai (ADN) extract in mice. We also assessed the stability of the ADN extract upon exposure to sunlight. Treatments were as follows: 1) CON (only saline solution), T1 (CON + 0.0125% ADN extract), T2 (CON + 0.05% ADN extract), and T3 (CON + 0.5% ADN extract). A 4 mm punch was used in the central part of the dorsal area to separate it from the subcutaneous tissue, causing a full-thickness skin wound. An amount of 1 mL of each sample was sprayed onto the treatment section of the wound with a pipette every day from the day of wound creation, with proper application ensured using brush. In the stability test, the pH was measured at 1, 4, and 8 weeks after exposing the samples of each treatment section to sunlight considering, the higher concentrations of the ADN extract. The results of this study indicate that the effectiveness of the wound contraction rate in the mice to which the ADN extract was applied was low. Moreover, the stability of the sample containing a high concentration of the ADN extract could not be verified. In addition, no significant results were obtained in the inflammatory reaction assessment. Therefore, additional research focusing on wound contraction, stability, and inflammatory cell outcomes of the ADN extract is needed.

• Analytical Science and Technology
• /
• v.34 no.4
• /
• pp.143-152
• /
• 2021

Capillary electrophoresis (CE) is an effective technique to study chiral recognition because it offers flexibility in adjusting vital factors. Currently, various available cyclodextrins (CDs) can be employed for the chiral separation of numerous analytes. Herein, we investigate the enantioseparation behavior of lipoic acid enantiomers in various types of single and dual CD systems through CE. Additionally, several impacted CE parameters were optimized through the systematic investigation based on the design of experiment (DoE) concept for a single system comprising a heptakis (2,3,6-tri-O-methyl)-β-CD and a dual system containing the combination of the single CD with a sulfated-β-CD. Consequently, absolute enantioresolution was obtained within 15 min on a common standard bare fused-silica capillary (64.5/56 cm in total/effective length, 50/365 ㎛ inner/outer diameter), maintained at 15 ℃ and at an applied voltage of 24 kV. The optimal background electrolyte consisted of 6 mM heptakis (2,3,6-tri-O-methyl)-β-CD dissolved in the solution of 58 mM borate buffer at pH 10. Furthermore, the results of apparent binding constant experiments indicated that the S-enantiomer-heptakis (2,3,6-tri-O-methyl)-β-CD complex exhibited a stronger affinity than its R-enantiomer counterpart. The obtained electrophoretic mobility values could be utilized to interpret the resolution achieved at various CD concentrations and the mobility behavior of the complexes elucidated the migration order of the enantiomers in an electropherogram.

• Journal of the Korean Ceramic Society
• /
• v.56 no.1
• /
• pp.98-103
• /
• 2019

Optical filters to control light wavelength of displays or cameras are fabricated by multi-layer stacking process of low and high index thin films. The process of multi-layer stacking of thin films has received much attention as an optimal process for effective manufacturing in the optical filter industry. However, multi-layer processing has disadvantages of complicated thin film process, and difficulty of precise control of film morphology and material selection, all of which are critical for transmittance and coloring effect on filters. In this study, the composite $TiO_2$, which can be used to control of UV absorption, coated on nano hollow silica sol, was synthesized as a coating material for optical filters. Furthermore, systematic analysis of the process parameters during the chemical reaction, and of the structural properties of the coating solutions was performed using SEM, TEM, XRD and photo spectrometry. From the structural analysis, we found that the 85 nm nano hollow silica with 2.5 nm $TiO_2$ shell formation was successfully synthesized at proper pH control and titanium butoxide content. Photo luminescence characteristics, excited by UV irradiation, show that stable absorption of 350 nm-light, correlated with a 3.54 eV band gap, existed for the $TiO_2$ shell-nano hollow silica reacted with 8.8 mole titanium butoxide solution. Transmittance observed on substrate of the $TiO_2$ shell-nano hollow silica showed effective absorption of 200-300 nm UV light without deterioration of visible light transparency.

• Journal of Electrochemical Science and Technology
• /
• v.12 no.1
• /
• pp.82-91
• /
• 2021

This study was conducted to investigate the effect of initial pH, current density, and electrolysis time on process performance in terms of decolorization and chemical oxygen demand (COD) removal from disperse dyebath wastewater (DDW) by mono-polar parallel laboratory scale electrocoagulation (EC) process. COD reduction of 51.3% and decolorization of 92.8% were obtained with operating cost of 0.19 €/㎥ treated wastewater for Al-Al electrode pair, while 90.5% of decolorization and 49.2% of COD reduction were obtained with operating cost of 0.20 €/㎥ treated wastewater for an Fe-Fe electrode pair. The amount of sludge production were highly related to type of the electrode materials. At the optimum conditions, the amount of sludge produced were 0.18 kg/㎥ and 0.28 kg/㎥ for Al-Al and Fe-Fe electrode pairs, respectively. High decolorization can be explained by the hydrophobic nature of the disperse dye, while limited COD removal was observed due to the high dissolved organic matter of the DDW based on auxiliary chemicals. Energy, electrode, and chemical consumptions and sludge handling were considered as major cost items to find a cost-effective and sustainable solution for EC. The contribution of each cost items on operating cost were determined as 10.0%, 51.1%, 30.5% and 8.4% for Al-Al, and they were also determined as 9.0%, 38.0%, 40.5% and 12.5% for Fe-Fe, respectively. COD reduction and decolorization were fitted to first-order kinetic rule.