• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.5
• /
• pp.646-650
• /
• 2001

The effect of feeding concentrate mixture devoid of grain on the performance of crossbred dairy cows was studied. Twelve crossbred cows of first/second lactation were randomly distributed into two equal groups. The animals of group 1 were fed on a concentrate mixture containing 30% maize grain whereas, the cows of group 2 were offered a concentrate mixture where grain was completely replaced with deoiled rice bran (DORB) and molasses. Wheat straw was given ad libitum to the cows of both the groups. The feeding was continued for 112 days. The intake of dry matter, CP and TDN were similar in both the groups. Digestibility of DM, OM, EE, NDF and ADF were also comparable between the groups. The average daily fat corrected milk (FCM) yield was 7.70 kg and 7.43 kg in group 1 and 2, respectively. The chemical composition of milk (protein, fat and total solids) also remained unaffected. The animals of both the groups gained 9-10 kg body weight which indicates that both the diets were nutritionally adequate and grain can be successfully replaced with DORB and molasses from the diet to sustain about 6-7 kg FCM production.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.41 no.1
• /
• pp.1-8
• /
• 2009

Mountain Pine Beetle (MPB) attacked pine was evaluated for pulp quality, chemical and physical properties, and bleachability. Chemical analyses showed that the dehydroabietic acid and total acetone extractives content were higher in the year 3 (grey) attacked MPB chips and lower in the year 5 (grey) attacked MPB chips as compared to a typical SPF (spruce/pine/fir) reference. Lignin and carbohydrate content of the MPB wood chips were comparable to the SPF. Similarly, there was little difference in kappa number, pulp yield and liquor consumption between the 3 and 5 year MPB attacked wood. Likewise there was no significant difference in the resulting tear strength, burst, or tensile strength. There appeared to be an improved bleaching response in the MPB attacked pulp as compared to the SPF reference, but this was accompanied by a slightly lower bleached pulp yield and higher bleach filtrate COD and solids content.

• Korea-Australia Rheology Journal
• /
• v.16 no.3
• /
• pp.109-115
• /
• 2004

Comparisons in shear behaviour are made between aqueous suspensions of a laterite ore and aqueous suspensions of pure goethite ($\alpha$-FeOOH), following prior papers in which the rheologies of the two mineral suspensions were characterized individually. Drawing comparisons is appropriate because the ore sample was about 65% goethite and it was originally thought that the pure goethite might serve as a model of the more complex laterite. Viscosity measurements of the two suspensions show that, at the same solids fraction, the goethite suspensions were more viscous by an order of magnitude, even though the goethite particles had much smaller aspect ratios. Similarly, yield stresses for the goethite suspensions were at least an order of magnitude higher. The most significant difference was in transient behaviour. Time-dependent effects were investigated by subjecting a fluid to a step change or a ramp sequence in shear rate, and measuring the resulting shear stress over time. In most cases, transient behaviour could not be detected in the goethite suspensions, whereas stresses in the laterite suspensions relaxed over periods of order 10 seconds. The disparate results indicate that a goethite suspension is a poor model of a laterite slurry.

• Journal of Environmental Health Sciences
• /
• v.22 no.4
• /
• pp.49-54
• /
• 1996

The anaerobic landfill leachate treatment can surmount dilution problem of high concentration landfill leachate, collect methane gas as byproduct, and treat low phosphate concentration leachate because of low nutrient salt requirement. The problems of conventional anaerobic treatment that are requirement of large reactor because of low microbial growth rate(HRT=20-30 days) and low volumetric loading rate(VLR=0.5-2.0 kg $COD/m^3\cdot day$) are able to surmount by introduction of high rate anaerobic treatment. In this study, the upflow blanket filter(UBF) which is high rate anaerobic process was applyed to the landfill leachate treatment. The acceptable volumetric loading rate and HRT were 18.23 kg $SCOD/m^3\cdot day$ and 13 hrs. SCOD removal rate was over 90% at VLR 18.23 kg $SCOD/m^3\cdot day$. The methane gas yield was $0.15 lCH_4/g$ SCOD added(at STP) at VLR 18.23 kg $SCOD/m^3\cdot day$. The solids accumulation yield was 0.40 g VSS/g COD removed.

• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.4
• /
• pp.387-394
• /
• 2019

This paper presents an analytical study on the strength and stiffness of various types of truss structures. The applied models are triangular-like opened truss-wall triangular model (OTT), closed truss-wall triangular model (CTT), opened solid-wall triangular model (OST), and hypercube models defined as core-filled or core-spaced cube. The models are analyzed by numerical model analysis using DEFORM 2D/3D tool with AISI 304 stainless steel. Then, the ideal solutions for stiffness and strength are defined. Finally, the relative elastic modulus of the core-spaced model is obtained as 0.0009, which is correlated with the cancellous bone for the relative density range of 0.029-0.03, and the relative elastic modulus for the core-filled model is obtained as 0.0015, which is correlated with cancellous bone for the relative density range of 0.035-0.036. For the relative compressive yield strength, the OTT reasonably agrees with the cancellous bone for the relative density of 0.042 and the relative compressive strength of 0.05. The CTT and OST are in good agreement at the relative density of 0.013 and the relative compressive yield strength of 0.002. The hypercube models can be used for the cancellous bone for stiffness, and the triangular models can be used for the cancellous bone for strength. However, none of the models can be used to replace the compact bone because it requires much higher stiffness and strength. In the near future, compact bone replacement must be further studied. In addition, previously mentioned models should be developed further.

• Journal of Bio-Environment Control
• /
• v.24 no.1
• /
• pp.27-33
• /
• 2015

High temperature stress in summer season at plastic house is a limiting factor for tomato fruit set and yield. This study was performed to assess the effects of gibberellic acid ($GA_3$) and 2,4-Dichlophenoxy acetic acid (2,4-D) spray on fruit set, yield, and quality of tomato cv. 'Adoration'(Enza Zaden Co., Ltd.) under the plastic house in Hwacheon, 2011. Four concentrations (0-, 5-, 10- and $15mg{\cdot}L^{-1}$) of $GA_3$, and three concentrations (0-, 5- and $10mg{\cdot}L^{-1}$) 2,4-D were sprayed in early flowering of tomato in the plastic house, and fruit set, yield and quality characters were observed. The results showed that spray of $10mg{\cdot}L^{-1}$ $GA_3$ significantly increased the fruit set by 14.2% than unsprayed. The spray of $GA_3$ significantly increased the marketable fruit number, fruit weight, and yield. The spray of 2,4-D on blossoms significantly affected the fruit set percentage, fruit weight, marketable fruit weight and yield, and the highest fruit set observed as 62.5% in combined spray of $GA_3$ and 2,4-D at each $5mg{\cdot}L^{-1}$. Fruit size and total soluble solids significantly varied with the concentrations of $GA_3$ sprayed. The result indicates that the spray of $10mg{\cdot}L^{-1}$ $GA_3$ and $5mg{\cdot}L^{-1}$ 2,4-D can be more economic and effective to increase the fruit set, and yield in tomato under high temperature condition in plastic house.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.8
• /
• pp.1118-1124
• /
• 2001

Fifteen lactating crossbred cows were randomly allotted to three groups of 5 each, and fed three isoproteinous concentrate mixture varying in RDP and UDP ratios, viz. 71: 29 (T1) and 58: 42 (T2) and 44: 56 (T3), along with green maize and wheat straw given as 2/3 and 1/3 of total roughage respectively, for a period of 120 days. The DM intake (kg/d) differed significantly (p<0.01) among the treatments as well as among the fortnights over a period of 120 days. DMI (kg/d) progressively increased from first to eighth fortnight in all the treatments. The daily DMI (% BW) was significantly (p<0.01) lower in T1 (2.37) than those of T2 (2.82) and T3 (2.67). The body weights of cows decreased up to 4th fortnight in T1 and up to 3rd fortnight in T2 and T3, then it showed an increasing trend till the end of the experiment in all the treatments. Cows in T1 lost 10 kg body weight but cows in T2 and T3 gained 23 and 12 kg the body weight, respectively. Both the milk and FCM yield differed significantly (p<0.01) among the fortnights. The FCM yield increased up to 2nd fortnight in all the treatments and thereafter, the FCM yield declined gradually as the lactation advanced. The FCM yield (kg/d) was significantly (p<0.05) higher in T3 (10.47) than in T2 (9.81) and T1 (9.68), however, milk yield, SCM yield and milk energy yield did not differ among the treatments as well as among the fortnights. Fat and protein % in milk increased as the lactation advanced. However, fortnightly SNF % in milk showed an irregular trend. The % fat, protein, SNF and total solids in milk differed significantly (p<0.01) among the fortnights. The % fat and protein in milk varied significantly (p<0.01) among the treatments, being lowest in T1 and highest in T3. The feed efficiency for milk production showed a non-significant variation among the treatments as well as among the fortnights, but increased with the increase in UDP level. It is concluded that by increasing the UDP level from 29 to 56 per cent of CP in the diet of medium producing cows, the milk production increases and cost of milk production reduces.

• Journal of the Korean Professional Engineers Association
• /
• v.32 no.2
• /
• pp.99-109
• /
• 1999

The dried sea tangle added for soup prepatation to improved the taste in Korean and Japaness for long time. Attempts were made to develop the best procedures for extraction and removal of alginate by ultrafiltration and diafiltration. The summerized results of this study are as follows: 1) For hot water extraction in temperature range of 60～100$^{\circ}C$ for 4 hours, the higher temperature resulted higher yields in solids and protein. 2) Optimum sea tangle hot water extraction condition were 60～65$^{\circ}C$ for 1 hour which was cheap operating cost and high yield of good taste components. 3) The membrane flux was more higher GR 51 PP. and increase of flow rate permeate flow rate was accordingly increased. but limiting flow volume was 3.7 l/min. 4) It was found that ultration was relatively of higher recovery rate, solid and taste components, and low rejection coefficient rate than diafiltration.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.42-47
• /
• 2004

Metallic glasses are amorphous meta-stable solids and are now being processed in bulk form suitable for structural applications including impact. Bulk metallic glasses have many unique mechanical properties such as high yield strength and fracture toughness, good corrosion and wear resistance that distinguish them from crystalline metals and alloys. However, only a few studies could be found mentioning the dynamic response and damage of metallic glasses under impact or shock loading. In this study, we employed a small explosive detonator for the dynamic indentation on a Zr-based bulk amorphous metal in order to evaluate the damage behavior of bulk amorphous metal under impact loading. These results were compared with those of spherical indentation under quasi-static and impact loading. The interface bonded specimens were adopted to observe the appearances of subsurface damage induced during indentation under different loading conditions.

• Journal of Ginseng Research
• /
• v.4 no.1
• /
• pp.72-87
• /
• 1980

Red ginseng tails were extracted with ethanol solutions over a range of concentrations and temperature conditions. Investigations were carried out to study the effects of treatments on yields, soluble solids, saponin and precipitate occured in red ginseng extract beverage during storage. It was found that: (1) Higher concentration of ethanol at low temperature resulted in less yield of crude extract (2) The amount of precipitate in the non-purified extract beverage were less with decrease in ethanol concentration used (3) The treatment for purification of extracts and storage of purified extract at 37$^{\circ}C$ for 6 months had no effect on HPLC chromatogram pattern of saponins (4) The amount of purified extract decreased by purification treatment and more decrease was found as the temperature and concentration of ethanol increased. For Preparation of red ginseng extract beverage, the treatment of extracts with ethanol at low temperature was found to be more effective to minimize precipitation in tile beverage.