• 제목/요약/키워드: solid yield

검색결과 708건 처리시간 0.028초

인진의 추출방법에 관한 시험 (Studies on Method Extraction in Artemisia Iwayomogi)

  • 송영은;곽준수;김창수;장광호;오동훈;한종현
    • 대한한의학방제학회지
    • /
    • 제7권1호
    • /
    • pp.183-188
    • /
    • 1999
  • Though development of diverse and highly value-added commodities in Artemisia Iwayomogi, we can expect such effects as procurement of secure farm's production bases and promotion of consumer's demands. Thus, as a first step for development of funtional foods of Artemisia Iwayomogi, solids yield, physical properties and scopoletin contents which is main component of Artemisia Iwayomogi, were investigated according to extration solvents and temperatures. The main result of this experiment were as following: solid yield in 50% ethanol extracts showed higher than those of water extracts at the same temperature. In condition of 50% ethanol extracts, solid yield, degree of browing and scopoletin contents showed increasing, but turbidities which mean transmittance(%T) showed decreasing sa temperature rise. In water extracts, pH values showed increasing as temperature rise.

  • PDF

Holstein종 유우(乳牛)의 비유량(泌乳量) 및 유조성분(乳組成分)에 미치는 유전(遺傳) 및 환경(環境)의 효과(效果) (Genetic and Environmental Effects on the Lactation Yield and Milk Compositions in Holstein Cow)

  • 상병찬;서길웅
    • 농업과학연구
    • /
    • 제21권1호
    • /
    • pp.45-53
    • /
    • 1994
  • 본(本) 연구(硏究)는 1990년부터 1991년까지 국립종축원에서 사육한 Holstein종 159두에서 조사된 성적을 근거로 최소자승법을 이용하여 종모우(種牡牛), 분만계절(分娩季節)및 산차(産差)가 비유량(泌乳量)인 유량(乳量) 및 유지방량과 유조성분(乳組成分)인 유지율(乳脂率), 유단백질율(乳蛋白質率), 무지고형분율(無脂固型紛率)및 총고형분율(總固型紛率)에 미치는 효과(效果)를 추정하였던바 그 결과(結果)를 요약하면 다음과 같다. 1. 비유량(泌乳量)에 있어서 유량(乳量)및 유지량(乳脂量)은 각각 $7,26.56{\pm}3,57.24$$230.95{\pm}43.56Kg$ 이었고, 유조성분(乳組成分)에 있어서는 유지율(乳脂率), 유단백질율(乳蛋白質率), 무지고형분율(無脂固型紛率) 및 총고형분율(總固型紛率)에 있어서 각각 $3.69{\pm}0.43$, $3.32{\pm}0.41$, $9.15{\pm}0.49$$12.75{\pm}0.96%$ 이었고, 변이계수는 유량, 유지량, 유지율 및 유단백질율에서 각각 18.68, 17.64, 11.88 및 12.34%이었다. 2. 종모우(種牡牛)의 효과(效果)에 있어서는 유량(乳量)과 유지량(乳脂量)및 유지율(乳脂率)에서 고도의 유의차 (P<0.01)가 인정되었으며, 유단백질율(乳蛋白質率) 및 총고형분율(總固型粉率)에서도 유의차 (P<0.05)가 인정되었다. 모우별(牡牛別)로는 유량(乳量)에서 B, L, 및 O 종모우(種牡牛)가 각각 7,571.22, 7,499.11 및 7,420.58Kg으로 가장 우수하였고, 유단백질율에서는 A, F 및 K 종모우가 각각 3.75, 3.64 및 3.65%로 다른 종모우에 비하여 높았다. 3. 산차(産差)의 효과(效果)에 있어서 유량(乳量)에서 고도의 유의차 (P<0.01)가 인정되었으며, 유지방량 및 유지율(乳脂率)에서는 유의차(P<0.05)가 인정되었고, 산차별(産差別)로는 유량(乳量)과 유지방량에서 3산차(産差)가 각각 7,634.54 및 274.98Kg로 가장 우수하였고, 유지율 및 유단백질율에서는 4산차 이상이 각각 3.90, 3.50%로 다른산차에 비하여 높았다. 4. 분만계절(分娩季節)의 효과(效果)에 있어서는 유량(乳量)에서 고도의 유의차 (P<0.01)가 인정되었으며 유지량(乳脂量), 유지율(乳脂率), 유단백질율(乳蛋白質率), 및 총고형분율(總固型紛率)에서 유의차(P<0.05)가 인정되었으며, 분만계절별(分娩季節別)로는 유량(乳量)에 있어서 봄과 겨울이 각각 7,310.31 및 7,364.57Kg로 우수하였고, 유단백질율에 있어서는 봄과 가을이 각각 3.68 및 3.52%로 우수하였다.

  • PDF

Enhanced Lovastatin Production by Solid State Fermentation of Monascus ruber

  • Xu Bao-Jun;Wang Qi-Jun;Jia Xiao-Qin;Sung Chang-Keun
    • Biotechnology and Bioprocess Engineering:BBE
    • /
    • 제10권1호
    • /
    • pp.78-84
    • /
    • 2005
  • The purpose of this study was to optimize the solid state cultivation of Monascus ruber on sterile rice. A single-level-multiple-factor and a single-factor-multiple-level experimental design were employed to determine the optimal medium constituents and to optimize carbon and nitrogen source concentrations for lovastatin production. Simultaneous quantitative analyses of the ${\beta}$-hydroxyacid form and ${\beta}$-hydroxylactone for of lovastatin were performed by the high performance liquid chromatography (HPLC) method with a UV photodiode-array (PDA) detector. The total lovastatin yield ($4{\sim}6\;mg/g$, average of five repeats) was achieved by adding soybean powder, glycerol, sodium nitrate, and acetic acid at optimized levels after 14 days of fermentation. The maximal yield of lovastatin under the optimal composition of the medium increased by almost 2 times the yield observed prior to optimization. The experimental results also indicated that the ${\beta}$-hydroxylactone form of lovastatin (LFL) and the ${\beta}$-hydroxyacid form of lovastatin (AFL) simultaneously existed in solid state cultures of Monascus ruber. while the latter was the dominant form in the middle-late stage of continued fermentation. These results indicate that optimized culture conditions can be used for industrial production of lovastatin to obtain high yields.

Solid-phase Refolding of Poly-lysine Tagged Fusion Protein of hEGF and Angiogenin

  • Park Sang Joong;Ryu Kang;Suh Chang Woo;Chai Young Gyu;Kwon Oh Byung;Park Seung Kook;Lee Eun Kyu
    • Biotechnology and Bioprocess Engineering:BBE
    • /
    • 제7권1호
    • /
    • pp.1-5
    • /
    • 2002
  • A fusion protein, consisting of a human epidermal growth factor (hEGF) as the recognition domain and human angiogenin as the toxin domain, can be used as a targeted therapeutic against breast cancer cells among others. The fusion protein was expressed as inclusion body in recombinant E. coli, and when the conventional, solution-phase refolding process was used the refolding yield was very low due to severe aggregation. It was probably because of the opposite electric charge at a neutral pH resulting from the vastly different pI values of each domain. The solid-phase refolding process that exploited the ionic interactions between ionic exchanger surface and the fusion protein was tried, but the adsorption yield was also very low, below $ 30\%$, regardless of the resins and pH conditions used. Therefore, to provide a higher ionic affinity toward the solid matrix, six lysine residues were tagged to the N-terminus of the hEGF domain. When heparin-Sepharose was used as the matrix, the adsorption capacity increased 2.5-3 times to about $88\%$. Besides the intrinsic affinity of angiogenin to heparin, the poly-lysine tag provided additional ionic affinity. And the subsequent refolding yield increased nearly 13-fold, from ca. $4.8\%$ in the conventional refolding of the untagged fusion protein to $63.6\%$. The process was highly reproducible. The refolded protein in the column eluate retained RNase bioactivity of angiogenin.

Analysis of the Strength Property for TiC-Mo Composites at High Temperature

  • Shin, Soon-Gi
    • 한국재료학회지
    • /
    • 제24권4호
    • /
    • pp.201-206
    • /
    • 2014
  • TiC-21 mol% Mo solid solution (${\delta}$-phase) and TiC-99 mol% Mo solid solution (${\beta}$-phase), and TiC-(80~90) mol% Mo hypo-eutectic composite were deformed by compression in a temperature range from room to 2300 K and in a strain rate range from $4.9{\times}10^{-5}$ to $6.9{\times}10^{-3}/s$. The deformation behaviors of the composites were analyzed from the strengths of the ${\delta}$- and ${\beta}$-phases. It was found that the high strength of the eutectic composite is due primarily to solution hardening of TiC by Mo, and that the ${\delta}$-phase undergoes an appreciable plastic deformation at and above 1420 K even at 0.2% plastic strain of the composite. The yield strength of the three kinds of phase up to 1420 K is quantitatively explained by the rule of mixture, where internal stresses introduced by plastic deformation are taken into account. Above 1420 K, however, the calculated yield strength was considerably larger than the measured strength. The yield stress of ${\beta}$-phase was much larger than that of pure TiC. A good linear relationship was held between the yield stress and the plastic strain rate in a double-logarithmic plot. The deformation behavior in ${\delta}$-phase was different among the three temperature ranges tested, i.e., low, intermediate and high. At an intermediate temperature, no yield drop occurred, and from the beginning the work hardening level was high. At the tested temperature, a good linear relationship was held in the double logarithmic plot of the yield stress against the plastic strain rate. The strain rate dependence of the yield stress was very weak up to 1273 K in the hypo-eutectic composite, but it became stronger as the temperature rose.

염류 및 pH, Acidulants, 다당류 분해효소가 마늘 추출 수율 및 변색에 미치는 영향 (Effects of Salts, pH, Acidulants and Carbohydrolase on Extraction Yield and Color Change of Garlic)

  • 조진숙;김동희;김우정
    • 한국식품과학회지
    • /
    • 제31권5호
    • /
    • pp.1211-1215
    • /
    • 1999
  • 마늘을 물로 추출할 때 효소분해와 pH, 그리고 유기산, 유기 또는 무기염의 첨가가 추출액의 고형분 수율과 색에 미치는 영향을 조사하였다. 그 결과 상업적다당류 분해효소에 의한 가수분해는 고형분 수율을 $15{\sim}20%$ 증가시켰으나 녹변현상이 더 발생하였고 노란색과 밝기가 감소되었다. 추출시 pH의 조정은 수율에는 큰 영향이 없었지만, $4.4{\sim}5.0$의 범위에서 녹색의 강도가 증가되어 적절치 않았다. 여러가지의 염과 유기산의 첨가 결과, $CaCl_2$와 sodium oxalate, tartaric acid, phosphoric acid가 수율 향상에 효과적이었으며, $K_{4}P_{2}O_{7}$은 수율향상과 녹변방지에 효과가 있었다.

  • PDF

Optimization of Extraction Parameters for Keratinase Recovery from Fermented Feather under Solid State Fermentation by Streptomyces sp. NRC 13S

  • Shata, Hoda Mohamed Abdel Halim;Farid, Mohamed Abdel Fattah
    • Journal of Applied Biological Chemistry
    • /
    • 제55권3호
    • /
    • pp.149-156
    • /
    • 2012
  • The effects of solvent type and concentration, solid/liquid ratio, extraction time and repeated extraction on recovery of keratinase from solid-state fermentation (SSF) of chicken feather by a local Streptomyces sp. NRC 13S were investigated in order to establish the experimental conditions for keratinase yield. Among solvents tested, 0.5% (v/v) glycerol was the best. Box-Behnken design was used to investigate the effect of relevant variables on keratinase recovery. The factors investigated were solid/liquid ratio (1:1.66-1:6.66 g/mL), glycerol concentration (0.5-5% v/v) and repeated extraction (1-5 cycle). The results showed that the maximum recovery of keratinase (6933.3 U/gfs) was obtained using 0.5 (v/v) glycerol as extracting solvent, in a solid/liquid ratio of 1:5 and three extraction cycles.

반용융 재료의 압출공정에 관한 유한요소해석 (Finite Element Analysis of Extrusion Process in Semi-Solid State)

  • 황재호;고대철;민규식;김병민;최재찬
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 1997년도 고액공존금속의 성형기술 심포지엄
    • /
    • pp.5-15
    • /
    • 1997
  • It is the objective of this study that by conducting the serni-solid extrusion using A12024, the effect of various process variables on the quality of extruded product and extrusion force is understood. The results of experiment are compared with those of finite element simulation in order to verify the effectiveness of the developed FE-simulation code. In order to simulate densification in the deformation of serni-solid material, the semi-solid material is assumed to be composed of solid region as porous skeleton following compressible visco-plastic model and liquid region following Darcy's equation for the liquid flow saturated in the interstitial space. Then the flow and deformation of the semi-solid alloy are analyzed by coupling the deformation of the porous skeleton and the flow of the eutectic liquid. It is assumed that initial solid fraction is homogeneous. Yield and plastic potential function presented by Kuhn and constitutive model developed by Gunasekera are used for solid skeleton.

  • PDF

적방.적화 처리가 하이부쉬 'Jersey' 블루베리 과실의 수량과 품질에 미치는 영향 (Effects of Cluster and Flower Thinning on Yield and Fruit Quality in Highbush 'Jersey' Blueberry)

  • 김진국;류명상;정성민;황용수
    • 생물환경조절학회지
    • /
    • 제19권4호
    • /
    • pp.392-396
    • /
    • 2010
  • 본 연구는 하이부쉬 블루베리(Vaccinium corymbosum) 'Jersey' 품종을 이용하여 적방 1/3, 적방 1/3 +적화 1/2, 적방 2/3 및 적방 2/3 + 적화 1/2처리 후 무처리 과실의 수확량과 과실 품질을 조사하여 적방 적화 정도에 따른 수량과 과실 크기, 가용성당함량, 산함량, 과실 경도를 분석하였다. 적방 적화 처리는 과립중, 종경 및 횡경에 유의한 과립 비대효과를 가져왔다. 과실 수확량은 무처리와 적방 1/3 처리구에서 가장 높았으며, 그 이외의 처리에서는 과립비대는 이루어졌으나 수확량의 감소가 발생하였다. 무처리와 적방 1/3 처리의 경우 전체 수확량은 비슷하였으나, 적방 1/3 처리구에서는 상품성이 큰 대립의 과실이 차지하는 비율이 무처리에 비해서 큰 것으로 조사되었다. 가용성당함량은 적방과 적화 처리에 따라 수량이 감소한 적방 2/3, 적방 2/3 + 적화 1/2 처리구에서 유의하게 증가하였으나, 산함량과 경도에는 영향을 미치지 않았다. 적방 적화에 따른 영향은 과립 비대와 수량에 유의한 차이를 주었으나 과실품질에는 크게 영향을 미치지 않는 것으로 조사되었다.

딸기 '설향' 촉성 재배 시 동절기 엽수 관리 방법이 수량 및 가용성 고형물 함량에 미치는 영향 (Effects of Leaf Management during Winter Season on the Yield and Soluble Solid Contents of Fruits in Forcing Cultivation of Strawberry 'Seolhyang')

  • 김대영;김승유;이선이
    • 생물환경조절학회지
    • /
    • 제25권4호
    • /
    • pp.283-287
    • /
    • 2016
  • 동절기 엽수 관리는 딸기 재배 농가마다 상이한데 촉성 작형으로 '설향'을 토경 재배할 때 동절기 엽수 조절이 딸기 수량 및 과실 당도에 미치는 영향을 2작기(2013-2014년 및 2014-2015년)에 걸쳐 검토하였다. 12월 상순에서 2월 하순 사이에 엽수를 성엽을 기준으로 6매 및 9매를 남기고 주기적으로 적엽하거나 노화되어 황화된 엽만 제거한 무적엽 처리구를 두어 실험하였다. 2014-2015년 작기에서 엽수를 6매 및 9매를 남기고 적엽한 처리구와 비교하여 무적엽 처리구에서 2월 하순까지의 조기 상품과 수량 및 상품과 총수량이 유의하게 높았다. 가용성 고형물 함량은 동절기 엽수 조절에 따라 1-3월 사이에 처리구간에 유의한 차이를 보였는데, 무적엽 처리구에서 가장 높았으며 수확 전기간 평균 $12^{\circ}Brix$ 내외로 안정적이었다. 따라서, 동절기에는 부족한 일조량과 단일 조건으로 충분한 동화산물의 생산이 어렵기 때문에, 노화엽과 이병엽을 제외하고 최소한으로 적엽하여 관리하는 것이 딸기 과실 수량과 품질을 향상시킬 수 있을 것을 판단된다.