• Journal of the Korea Furniture Society
• /
• v.20 no.4
• /
• pp.326-338
• /
• 2009

This study aimed at developing tea furniture with beauty of traditional Korean furniture. As the population which drinks tea increases day by day in the light of LOHAS (Lifestyles of Health and Sustainability) era, the importance of the tea culture has been brought out and the interest of the pieces has increased with the cultural space. But the study is still not only insufficient for Korean tea cultural space, it is but also hard for us to find such pieces as holding the original culture's charm. Thus, after studying concepts and spatial qualities of the tea cultural space based on the traditional culture and after investigating the tea objects including the integral parts, a piece of tea shelf with table which hits the emotion of Korea necessary to tea cultural space was created with solid wood. As a result, if we rediscover and develop the tea pieces with beauty of traditional Korean furniture mentioned as the green furniture, the objects will be standing on tiptoe as contemporary tea pieces conveying the identity of Korea. In addition, they will have a competitiveness across the world pursuing LOHAS beyond well-being.

• Journal of Korean Society for Atmospheric Environment
• /
• v.30 no.6
• /
• pp.538-544
• /
• 2014

A traditional fireplace has been used, but not much, for heating and cooking in rural area, Korea. Traditional fireplace as one type of biomass burnings is also emitting various air pollutants. Air pollutants emission from traditional fireplace was estimated in this study. There are two types of traditional fireplace, one for combined heating and cooking, the other one for cooking only. Types of fuels mostly used in traditional fireplace were wood, agricultural residue, solid waste. Activity levels such as fuel types, amount of fuel loading, and temporal variation were investigated by field survey over Korea. Estimated annual emissions from traditional fireplace were CO 6,335.0, NOx 555.0, SOx 9.6, VOC 1,771.7, TSP 181.4, $PM_{10}$ 119.9, $PM_{2.5}$ 96.2, $NH_3$ 1.4 ton/yr respectively. When emissions compared with the national emission inventory (CAPSS: Clean Air Policy Support System) of 2010 year, CO and $PM_{10}$ occupy 0.8% and 0.1% of total national emission, respectively.

• Journal of Forest and Environmental Science
• /
• v.34 no.4
• /
• pp.352-358
• /
• 2018

This research paper investigates available options for implementing clean development mechanism (CDM) project in Sarawak state, Malaysia. To investigate economic feasibility, data was collected using survey and field research methods. Also, economic analysis was estimated using net present value (NPV), internal rate of return (IRR) and payback period (PBP) during the 30 years CDM: afforestation and reforestation periods. The result of economic analysis indicated that, the payback period was estimated at 9 years with 18 percent of internal rate of return (IRR). This study also highlighted that CDM biomass supply project have a lot of challenges due to the reduction and exclusion of bio-Solid Recovered Fuel (SRF), supply and demand scenario, and impact of restriction of illegal logging in Malaysia. This study results demonstrate the methodology and guideline for future CDM investment and projects.

• Journal of Plant Biotechnology
• /
• v.34 no.2
• /
• pp.103-109
• /
• 2007

The increasing industrialization of the world has led to precipitous rise for the demand of petroleum-based fuels. The world is presently confronted with the twin crises of fossil fuel depletion and environmental pollution. The search for alternative fuels, which promise a harmonious correlation with sustainable development, energy conservation, efficiency and environmental preservation, has become highly pronounced in the present. Bioenergy is playing an increasingly important role as an alternative and renewable source of energy. Use of Bioenergy has several potential environmental advantages. The most important perhaps is reduction in life cycle greenhouse gases emissions relatives petroleum fuels, since bioenergy is derived from plants which convert Carbon dioxide ($CO_{2}$) into Carbohydrates in their growth. Bioenergy includes solid biomass, biomas and liquid bio-fuels which are fuels derived from crop plants, and include biomass that's directly burned. The two most important bio liquid fuels today are bioethanol from fermenting grain, grass, straw or wood, and biodiesel from plant seed oil.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.3
• /
• pp.55-62
• /
• 2015

Paper mulberry fibers have been used as fibrous raw materials for manufacturing traditional handmade paper, hanji for a long time. Compared to wood pulp fibers, pulp fibers from mulberry bast tissue have some benefits in physical and chemical properties due to their high D.P (degree of polymerization), M.W (molecule weight) and long fiber length. Specially, Korean handmade hanji shows outstanding characteristics in mechanical tensile strength, folding endurance, flexibility and long sustainable conservation properties. Therefore, hanji is widely applied to daily supplies, hygienic goods, medical supplies, clothing industries and so on. Recently, the potential demand of mulberry pulp fibers is more and more increased on the strength of high application fields. This study was focused on the possibility of wastewater recycling in unit operation systems for the development of automated mass production line. The properties and environmental loads of wastewater from debarking, cooking, bleaching and screening process were analyzed by means of COD, conductivity, turbidity and solid materials. The wastewater from debarking and cooking process was comparatively high in pollution load, and would be treated by additional approaches of chemico-physical method.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.11b
• /
• pp.172-177
• /
• 1999

Effect of fiber treatment with cellulase (Liftase A40), and with two refining methods (Valley beating and impact refining) on wood fiber and handsheet properties were investigated at three refining levels (300, 400, and 500ml) for two furnishes (NBKP and LBKP). Part of the treated furnishes were classified by 150 mesh screen into fine-free fiber, and fines. Fiber length analysis, WRV, zero-span strength, and other handsheet mechanical properties were compared. The study showed that Liftase A40 lowered the zero-span and the folding endurance of both furnishes (NBKP much more and LBKP much less). Pretreatment with Liftase A 40 followed by refining significantly lowered the fiber length and refining energy to reach to the target freeness. Impact refining, which is done by hitting the fibers vertically with rod at 20% solid content, kept the fiber length increased WRV, and improved handsheet mechanical properties much more than valley beating. Properties of fines from different sources were compared in detail in the study.

• Journal of Mushroom
• /
• v.11 no.2
• /
• pp.87-91
• /
• 2013

When No. 42 strain of Pleurotus ostreatus was cultivated at five different media, MnP and Lac but no LiP activity was detected throughout the culture period in the media. The production of MnP and Lac by No. 42 strain of Pleurotus ostreatus were correlated with wheat bran composition in the medium. In the liquid culture, maximum production of MnP and Lac were observed in the medium contained glucose-peptone- yeast-wheat bran(GPYW). However, in solid medium, maximum production of MnP was observed in wood meal-wheat bran(WMW) medium, but that of Lac was observed in wheat bran(W) medium.

• Structural Engineering and Mechanics
• /
• v.16 no.4
• /
• pp.391-404
• /
• 2003

Local reinforcement in dowel type timber joints is essential to improve ductility, to increase load carrying capacity and to reduce the risk of brittle failure, especially in the case of using solid dowel. In many types of reinforcing materials available today, DVW (densified veneer wood) has been demonstrated to be the most advantages in terms of compatibility, embedding performance and ductility. Preliminary studies show that using appropriately sized DVW discs bonded into the timber interfaces may be an effective way to reinforce the connection. In this paper, non-linear 3-dimensional finite element models, incorporating orthotropic and non-linear material behaviour, have been developed to simulate structural performance of the timber joints locally reinforced by DVW discs. Different contact algorithms were applied to simulate contact conditions in the joints. The models were validated by the corresponding structural tests. Correlation between the experimental results and the finite element simulations is reasonably good. Using validated finite element models, parametric studies were undertaken to investigate effects of the DVW disc sizes and the end distances on shear stresses and normal stresses in a possible failure plane in the joint.

• Korean Institute of Interior Design Journal
• /
• v.17 no.3
• /
• pp.94-101
• /
• 2008

The purpose of this study was to analyze the preference of living room furniture and to suggest Korean brand furniture design guideline. Subjects consisted of 171 residents aged up 20 years old in Seoul and Kyung-ki. area. The data were analyzed using the SPSS statistical package. The results of descriptive statistics, factor analysis, t-test and $x^2$-test are presented. The result of this study showed as fallows; 1) Livingroom funiture design with considering family life behavior were needed. 2) Modernizing traditional elements(motives and pattern) were preferred to duplicating traditional elements. 3) In furniture materials, easy to maintaining and cleaning and environmentally-sound materials as solid wood were highly appraised. Also, functional and harmonious furniture design with interior or other furniture were needed. So, modular-system furniture for livingroom would fulfill user's needs which are function, harmony and conciseness. 4) Elegant, easy, unique, functional, and simple design for livingroom were highly appraised. Considering these results, it is necessary to develop more on the modernized traditional furniture based on the various needs of users. These results provide a practical guideline for the development of the Korean brand design for livingroom furniture design.

• Korean Chemical Engineering Research
• /
• v.55 no.3
• /
• pp.385-394
• /
• 2017

In this study, reaction mechanism and curing characteristics of adhesives formulated with NaOH- and $H_2SO_4$-hydrolyzed chicken feather (CF) and formaldehyde-based crosslinkers were investigated by FT-IR and DSC. In addition, adhesive properties and formaldehyde emission of medium-density fiberboards (MDF) applied with the adhesives were measured. CF-based adhesives having a solid content of 40% and over were very viscous at $25^{\circ}C$, but the viscosity reduced to $300{\sim}660m{\cdot}Pa{\cdot}s$ at $50^{\circ}C$. Consequently, the adhesives could be used as a sprayable resin. Through the FT-IR spectra of liquid and cured CF-based adhesives, addition reaction of methylol group and condensation reaction between the functional groups with the use of formaldehyde-based crosslinkers were identified. From the analysis of DSC, it was elucidated for CF-based adhesives to require a higher pressing temperature or longer pressing time comparing to commercial urea-formaldehyde (C-UF) resin. MDF bonded with CF-based adhesives, which was formulated with 5% NaOH-hydrolyzed CF (CF-AK-5%) and PF of formaldehyde to phenol mole ratio of 2.5 (PF-2.5), and pressed for 8 min had higher MOR and IB than those with other CF-based adhesives. MOR and IB of MDF bonded with the CF-based adhesives regardless of formulation type and pressing time were higher than those with C-UF resin. When the values compared with the minimum requirements of KS standard, IB exceeded the KS standard in all formulations and pressing time, but MOR of only MDF bonded with CF-AK-5% and PF-2.5 and pressed for 8 min satisfied the KS standard. What was worse, 24-TS of MDF bonded with all CF-based adhesives did not satisfied the KS standard. However, MOR and 24-TS can be improved by increasing the target density of MDF or the amount of wax emulsion, which is added to improve the water resistance of MDF. Importantly, the use of CF-based adhesives decreased greatly the formaldehyde emission. Based on the results, we reached the conclusion that CF-based adhesives formulated under proper conditions had a potential as a sprayable resin for the production of wood panels.