• 대한기계학회논문집
• /
• 제15권2호
• /
• pp.575-583
• /
• 1991

The weld pool convection problem that occurs during the stationary GTA welding has been studied, considering the four driving forces for weld pool convection, i.e., the electromagnetic force, the buoyancy force, the aerodynamic drag force, and the surface tension force at the weld pool surface. In the numerical simulation, the difficulties associated with the irregular moving liquid-solid interface have been successfully overcome by adopting a Boundary-Fitted Coordinate system. In the experiments to show the validity of the numerical analysis, a deep periphery and shallow centerpentrated weld pool shape was observed from the etched specimen. It could be revealed that this type of weld pool shape could be simulated, only when some of aerodynamic drag force distributions are considered. Although slight disagreement arose, the calculated and the observed weld pool shapes were in a reasonable agreement.

• 한국의류학회지
• /
• 제18권5호
• /
• pp.661-673
• /
• 1994

We have gathered a fatty acid to recycle the waste oil of food manufacturing process, and then made a soap from the waste oil by alkali saponification. Effects of the washing elements such as the concentration of the soap, temperature and time were evaluated to find out the optimum washing conditions, and results are as follows. 1. We could find soaps made from the soybean oil (A), corn oil (B), rape seed salad oil (C), cotton seed oil (D) and a soap consisting of the each oil 25% respectively (I) had the lowest surface tension at the concentration of 0.225% -0.25%. Compared with the single fatty-acid soap, the multi-component soap I showed the lower surface tension at the cmc. 2. All the samples of A-I showed the lowest contact angle for the solid material at the concentration of 0.25%. The multi-component soap of I showed higher contact angle than the single.component soaps of A, B, C and D. 3. The soap G, made from the waste oil, show lower surface tension than 5, made from the complex raw fats of the eatable fatty oil acid and H, commercial soap. 4. The washing efficiency depends on the washing time. Especially the 25-minute was found to be the optimum washing time. 5. The highest washing efficiency was found at the 0.25% cont. reagardless of the washing temperature. At 0.15% concentration level the washing efficiency reduces as washing tem- perature increases. At 0.3% concentration level the highest washing efficiency was found between $50^{\circ}$-$60^{\circ}$. 6. The soap made from the waste oil showed the highest washing efficiency in terms of concentration, temperature, and time. 7. The soap made from the waste oil showed the similiar concentration of hydrogen ion to the synthetic detergent. 8. The hand value of the fabric washed by the soap made from the waste oil was a little lower value than those washed by the synthetic detergent.

• Current Applied Physics
• /
• 제18권11호
• /
• pp.1368-1374
• /
• 2018

In this paper, forced vibration was used to regulate the droplet migration, fully recording the transient migration of droplets on a micro-textured substrate under the resonance frequency by a high-speed camera. The influence of resonance frequency and dynamic migration characteristics of droplets on the solid micro-texture surface under lateral vibration were researched. The experiment demonstrates that the driving force is caused by the difference between the left and right contact angles made the droplet oscillate and migrate, and as time t increases, the left and right contact points are periodically shifted and the amplitude of migration increases. Therefore, based on the droplet migration behavior and its force balance mechanism, a spring vibration model of migration behavior of the vibrating droplet micro unit was set up to predict the complete trajectory of its migration on a solid surface. The calculation results show that the theoretical displacement is less than the experimental displacement, and the longer the time, the larger the difference. Affected by the vibration, part of the droplet permeates through the micro-texture, resulting in the droplet losing height and the contact angle becoming smaller as well. While the other part of droplet overcomes the internal surface tension to migrate.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.272-279
• /
• 2001

The objective of this paper is the investigation of the relationships between the surface roughness and film evaporative characteristics of the surface. For example, when the droplet of liquid is in contact with the solid surface, its behavior strongly depends on the surface characteristics. The material properties and geometry - profile shape, waviness, roughness - of the surfaces have strongly influenced on the wettability of the droplet. To investigate the effect of the surface roughness on the film evaporation, firstly, the characteristics of wettabilities were studied according to contact angle and surface tree energy of specimens with various roughness heights. Secondly, the experimental test were carried out on capacities of the tubes diversly roughened by using different kinds of emery papers. Finally, the relationships between the film evaporation characteristics and surface roughness were explained by means of the correlation of contact angle and surface free energy with surface roughness and the influences of surface tree energy on the heat transfer performance.

• 접착 및 계면
• /
• 제3권3호
• /
• pp.7-14
• /
• 2002

Poly(ethylene-co-methylacrylate)(PEMA)를 KOH, 암모니아 수용액으로 가수분해, ammonolysis 시켜서 측기에 -COOK, $-CONH_2$, -COOH를 갖는 수분산 형태의 변성 폴리에틸렌(m-PE)을 제조하였다. Infrared spectroscopy, 원소 분석 및 atomic absorption 분석 등을 통하여 m-PE 측기의 종류 및 조성비를 조사하였으며 수분산액의 고형분 함량에 따른 점도 및 표면장력을 측정하였다. 제조된 수분산액은 측기의 조성에 따라 안정도, 투명도 등이 변화하였다. 측기 중에서 -COOK가 수분산에 가장 큰 영향을 주었으며 -COOK 조성비가 20 mol% 이상이 되어야 안정한 분산을 얻을 수 있었고 또한 -COOK 조성비가 높을수록 수분산액은 투명하였다. 동일 -COOK 조성비에서는 아마이드의 농도가 높을수록 탁도가 증가하여 친수성이 떨어짐을 알 수 있었다. 분산액의 고형분 함량에 따른 점도를 측정하면 -COOK 조성비가 클 경우 낮은 고형분 함량에서 급격한 점도 증가가 일어나 고분자 사슬사이의 얽힘이 쉽게 일어남을 알 수 있으며 표면장력은 -COOK 조성비가 클 경우 작은 값을 나타내었다.

• 한국전산유체공학회지
• /
• 제13권3호
• /
• pp.8-13
• /
• 2008

We present a numerical simulation technique and some preliminary results of the impact and spreading of a droplet containing particles on the solid substrate in 2D. We used the 2nd-order Adams-Bashforth / Crank-Nicholson method to solve the Navier-Stokes equation and employed the level-set method with the continuous surface stress for description of droplet spreading with interfacial tension. The impact velocity has been generated by the instantaneous gravity. The distributed Lagrangian-multipliers method has been combined for the implicit treatment of rigid particles and the discontinuous Galerkin method has been used for the stabilization of the interface advection equation. We investigated the droplet spreading by the inertial force and discussed effects of the presence of particles on the spreading behavior using an example problem. We observed reduced oscillation and spread for the particulate droplet.

• 대한화학회지
• /
• 제20권6호
• /
• pp.460-468
• /
• 1976

액체분자는 고체 및 기체와 같은 자유도를 갖는다는 가정하에 물에 관한 이론을 얻었다. 고체와 같은 분자의 진동수를 알아내는 데에 분광학적인 데이타를 이용하였다. 몰부피, 증기압, 엔트로피, 증발 엔트로피, 팽찰률, 압축률, 일정한 부피 및 일정한 압력하에서의 열용량, 표면장력, 임계점등을 계산한 결과 모두가 실험치와 아주 잘 일치하였다.

• 공업화학
• /
• 제31권2호
• /
• pp.193-199
• /
• 2020

식기세정용 세정제의 조성에 따른 오일(O) 및 세정수용액(W)의 계면의 물성에 미치는 영향을 조사하였으며 계면물성에 따른 세정효과를 검토하였다. 또한 각 조성에 따른 식기표면에 오염된 오일의 세정력과 세척 헹굼 후 오염물 및 세척제의 잔류성에 대한 평가를 하였다. 본 연구에서 사용된 세정제의 조성에 있어서 고체표면에 오염된 오일의 제거는 세척액/오일/고체 간의 계면물성과 깊은 관련이 있었으며, 특히 전진 및 후진 동적접촉각에 크게 의존하였다. 전진 및 후진접촉각이 동시에 낮은 경우에 세정액의 침투성이 매우 커서 고체표면에 오염된 오일의 제거효과가 높았으며 세척 후 오염물의 잔류가 거의 없었다. O/W의 계면장력이 작을수록 오염된 오일의 유화가 잘 되었으며 계면장력이 높을수록 유화가 잘 이루어지지 않았다. 그러나 본 연구에서는 유화효과는 세척력에 크게 영향을 미치지 못하였으며 특히 낮은 계면장력을 갖는 세정제의 경우 세척 후 세정제 물질이 피세척물의 표면에 잔류하는 문제점이 있었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.496-500
• /
• 1997

This paper describes an automated system for analyzing the stress intensity factors(SIFs) of three-dimensional (3D) cracks. A geometry model, i.e.a solid containing one or several 3D cracks is defined. Several distributions of local node density are chosen, and then automatically superposed on one another over the geometry model by using the fuzzy knowledge processing. Nodes are generated by the bucketing method, and ten-noded quadratic tetrahedral solid elements are generated by the Delauuay triangulation techniques. The singular elements such that the mid-point nodes near crack fornt are shifted at the quarter-points are automatically placed along the 3D crack front. THe complete finite element (FE) model generated, i.e the mesh with material properties and boundary conditions is given to one of the commercial FE codes, and a stress analysis is performed. The SIFs are calculated using the displacement extrapolation method. To demonstrate practical performance of the present system, a semi- elliptical surface crack in a plate subjected to tension is solved.

• 한국추진공학회지
• /
• 제17권2호
• /
• pp.57-62
• /
• 2013

고체추진제 내부의 균열은 연소면적을 증가시키기 때문에 과연소를 발생시키며 로켓의 기능을 상실하거나 파손되는 문제로 이어질 수 있다. 따라서 고체추진제의 설계에서 균열진전에 대한 저항력인 파괴인성의 평가가 요구된다. 하지만 고체추진제의 특성상 복잡하고 심한 비선형 거동을 나타내기 때문에 파괴인성을 측정하는 데에는 많은 어려움이 있다. 본 연구에서는 고체추진제를 선형점탄성 재료로 가정하여 파괴인성을 평가하였다. CCT(Center-cracked Tension) 시험편을 이용한 파괴인성시험을 수행하였으며 점탄성재료에서 나타나는 응력완화현상을 이용한 가상탄성변위를 계산하여 ASTM E399 규격을 통해 파괴인성을 평가하였다. 또한 파괴인성에 대한 시험온도, 시험 속도의 영향에 대한 결과를 고찰하였다.