• 한국물환경학회지
• /
• 제30권2호
• /
• pp.119-127
• /
• 2014

The objective of this study is to evaluate and analyze Sumjin River Basin water environment system. It was necessary to improve the water quality. The data were collected from 2010 January to 2012 December including Water Temperature, pH, DO, EC, $BOD_5$, COD, TOC, SS, T-N, T-P. The data were used to study were required to; Correlation Analysis; Principle Component Analysis; Factor Analysis. The results were as followed. According to correlation analysis on $BOD_5$ against COD, TOC it revealed that the each value of correlation coefficient were 0.715 and 0.719; this means the strength of the relationship is strong. The same analysis on T-P against $BOD_5$, COD, TOC, SS has revealed that the range of the correlation coefficient value fell between 0.482 and 0.608 which means strength of the relationship between them remained normal. Through correlation analysis, it has been found that all elements except T-N have high correlation. The results of principal component analysis to target the overall water quality was extracted to three main components. The cumulative contribution rate is 68.990%. In the case of seasonal water quality, Spring and Summer are extracted to each of four main components. The cumulative contribution rate is 81.515% and 73.550% respectively. Fall and Winter are extracted to each of three main components. The cumulative contribution rate is 65.072% and 72.721% respectively. There is no seasonality in the case of factor analysis. The first common factor is $BOD_5$, COD, TOC, SS, T-P, which were classified. Totally speaking, Sumjin River Basin water system gets highly affected by the nutrient salts, organic matter and suspended solid at the same time.

• 한국분말재료학회지
• /
• 제18권5호
• /
• pp.430-436
• /
• 2011

Joining of NiO-YSZ to 316 stainless steel was carried out with B-Ni2 brazing alloy (3 wt% Fe, 4.5 wt% Si, 3.2 wt% B, 7 wt% Cr, Ni-balance, m.p. 971-$999^{\circ}C$) to seal the NiO-YSZ anode/316 stainless steel interconnect structure in a SOFC. In the present research, interfacial (chemical) reactions during brazing at the NiO-YSZ/316 stainless steel interconnect were enhanced by the two processing methods, a) addition of an electroless nickel plate to NiO-YSZ as a coating or b) deposition of titanium layer onto NiO-YSZ by magnetron plasma sputtering method, with process variables and procedures optimized during the pre-processing. Brazing was performed in a cold-wall vacuum furnace at $1080^{\circ}C$. Post-brazing interfacial morphologies between NiO-YSZ and 316 stainless steel were examined by SEM and EDS methods. The results indicate that B-Ni2 brazing filler alloy was fused fully during brazing and continuous interfacial layer formation depended on the method of pre-coating NiO-YSZ. The inter-diffusion of elements was promoted by titanium-deposition: the diffusion reaction thickness of the interfacial area was reduced to less than 5 ${\mu}m$ compared to 100 ${\mu}m$ for electroless nickel-deposited NiO-YSZ cermet.

• 한국표면공학회지
• /
• 제48권6호
• /
• pp.260-268
• /
• 2015

The thermal barrier coating (TBC) for inner wall of liquid-fuel rocket combustor consists of NiCrAlY as bonding layer and $ZrO_2$ as a top layer. In most case, the plasma spray coating is used for TBC process and this process has inherent possibility of cracking due to large difference in thermal expansion coefficients among bonding layer, top layer and metal substrate. In this paper, we suggest crack-free TBC process by using a precise electrodeposition technique. Electrodeposited Ni-P/Cr double layer has similar thermal expansion coefficient to the Cu alloy substrate resulting in superior thermal barrier performance and high temperature oxidation resistance. We studied the effects of phosphorous concentrations (2.12 wt%, 6.97 wt%, and 10.53 wt%) on the annealing behavior ($750^{\circ}C$) of Ni-P samples and Cr double layered electrodeposits. Annealing temperature was simulated by combustion test condition. Also, we conducted SEM/EDS and XRD analysis for Ni-P/Cr samples. The results showed that the band layers between Ni-P and Cr are Ni and Cr, and has no formed with heat treatment. These band layers were solid solution of Cr and Ni which is formed by interdiffusion of both alloy elements. In addition, the P was not found in it. The thickness of band layer was increased with increasing annealing time. We expected that the band layer can improve the adhesion between Cr and Ni-P.

• 한국철도학회논문집
• /
• 제13권6호
• /
• pp.546-551
• /
• 2010

본 연구에서는 단일겹치기 접착 체결부에 대한 유한요소해석을 통해 요소의 조밀도 및 유한요소의 종류에 따른 접착 층의 변형률 분포를 Tsai의 시험치 와 비교하여 분석하였다. 이를 위해 접합부재의 길이방향, 접착체결부의 길이방향, 접합부재의 두께방향, 접착 층의 두께방향 및 조인트의 폭방향의 요소 조밀 도를 변화시켰다. 또한, 솔리드, 쉘 및 평면 변형률 요소에 따른 효과도 분석하였다. 해석은 단일 겹치기 접착 체결부의 대변형을 고려하기 위한 기하학적 비선형 해석을 수행하였다. 이를 통해 솔리드 요소를 적용할 경우 접착부재의 길이방향으로의 요소 수는 최소 2개 이상이면 해석의 신뢰도를 확보할 수 있음을 확인할 수 있었다. 쉘 요소의 겨우 x/c=1에서 수직 변형률의 시험결과와 22.8%의 오차를 보였으나, 전단응력의 경우에는 1.67%로 시험치와 거의 일치하였다.

• 한국실내디자인학회논문집
• /
• 제23권1호
• /
• pp.88-95
• /
• 2014

This study intended arousal of other viewpoints that deal with and understand spaces and shapes, by describing the concept of 'dimensions' into visual patterns. Above all, the core concept of spatial dimensions was defined as 'expandability'. Then, first, the 'golden ratio', 'Fibonacci sequence', and 'fractal theory' were defined as elements of each dimension by stage. Second, a 'unit cell' of one dimension as 'minimum unit particles' was set. Next, Fibonacci sequence was set as an extended concept into two dimensions. Expansion into three dimensions was applied to the concept of 'self-similarity repetition' of 'Fractal'. In 'fractal dimension', the concept of 'regularity of irregularity' was set as a core attribute. Plus, Platonic solids were applied as a background concept of the setting of the 'unit cell' from the viewpoint of 'minimum unit particles'. Third, while 'characteristic patterns' which are shown in the courses of 'expansion' of each dimension were embodied for the visual expression forms of dimensions, expansion forms of dimensions are based on the premise of volume, directional nature, and concept of axes. Expressed shapes of each dimension are shown into visually diverse patterns and unexpected formative aspects, along with the expression of relative blank spaces originated from dualism. On the basis of these results, the 'unit cell' that is set as a concept of theoretical factor can be defined as a minimum factor of a basic algorism caused by other purpose. In here, by applying diverse pattern types, the fact that meaning spaces, shapes, and dimensions can be extracted was suggested.

• 대한화학회지
• /
• 제53권6호
• /
• pp.784-792
• /
• 2009

본 연구는 과학 교사들의 과학과 교수 . 학습 설계 시 도움이 되는 자료를 제공하기 위하여 각 시-도 교수학습지원센터와 서울특별시과학전시관 홈페이지에 게재되어 있는 교수-학습 과정안에 나타나는 교육과정 위계 부적합 사례를 조사하였다. 교육과정 위계 부적합 사례는 7학년 ‘물질의 세 가지 상태’ 단원에 한정하였으며, 분석에 사용한 내용 요소는 물질의 상태 변화, 분자, 분자 모형이었다. 그 결과 교육과정 위계 부적합 사례에 해당하는 내용 요소는 ‘물질의 상태 변화’에서는 플라즈마, 상평형, 눈이 생기는 현상, 물의 특이성, 결정성과 비결정성 고체의 분류, 열에너지, 물리 변화 등 7종류였으며, ‘분자 모형’에서는 분자 운동, 밀도가 발견되었다. 그리고 ‘분자’에서는 교육과정 위계 부적합 사례가 발견되지 않았다.

• 대한화장품학회:학술대회논문집
• /
• 대한화장품학회 1999년도 IFSCC . ASCS 학술대회 발표 논문
• /
• pp.97-110
• /
• 1999

The new stick make-up product was studied by using a gel, which is a viscous complex formed with clay minerals, vitamins A and I and fluorinated liquid polymer with a 1500 molecular weight. The gel cannot be obtained with any random combination of clay minerals and the ingredients described above. It takes the sequential manufacturing method as follows to get this kind of gel. Firstly, clay minerals and liquid polymers have ·to be pre-mixed in order to saturate the liquid polymers with the clay minerals. Then tile on-processed gel has to be finely crystallized. The clay minerals, which are the core elements for this gel, were used as a function of Binder & Buffer and liquid polymer was mixed together for the deterioration of the surface tension of each component and to from a functional film in the gel. This liquid polymer was combined with clay minerals because it is not miscible with most oils and solvents. Waxes have a function of keeping a solid status in the stick. We reduced the usage of waxes by putting clay minerals as buffer in the proportion of 0.5 : 1 with oil phase. Ceramide takes care of the skin when used regularly and maintains the skin’s moisture. Vitamins A and I contribute to preventing skin’aging by the activation of skin cells. We could get the stable viscous gel, which has about 80% oil phase using clay minerals and liquid polymer, The crystal 1 me structures of gel were surface-chemical1y-analyzed using SEM and Image Analyzer and were thermodynamically analyzed using DSC, Surface tension test and softness were done by Rheometer. In the end, these characteristics were verified by consumer panel tests in Seoul, Baegeon and Pusan in Korea and Hokkaido, Oska and Miyazaki in Japan with correlation to the climate.

• 혜화의학회지
• /
• 제18권1호
• /
• pp.117-127
• /
• 2009

Study on correspondent of eastern and western astrology and Jung's psychological types, we obtain as follow as results. Western astrology is transmitted from China and developed, it influenced on the study of the Four Pillars(四柱學). Comparing assemble, gathering, punishment, destruction, collision, impair of Di-zhi(地支) in the study of Four Pillars with Xing-gong theory(星宮論) in the western astrology, can get the result that the Pillars study has close connection with astronomy and astrology. When we compared Jung's psychological types with astrology, the five elements(五行) and the four major factors, can be summarized like this. (1) intuition-fire sign-wood and fire-fire in the four major factors(四大), (2) sensation-earth sign-earth and metal-earth in the four major factors, (3) thinking-air sign-metal and water-wind in the four major factors, (4) feeling-water sign-water and wood-water in the four major factors. The four major factors of Buddhism is now understood as, earth, water and fire represent the state of solid(earth), liquid(water), gas(fire) and wind can be recognized as energy source help the changes. This is mentioned throughout the books, but only arranging the theory of four major factors.

• 한국해안해양공학회지
• /
• 제6권2호
• /
• pp.139-149
• /
• 1994

본 논문에서는 항만 부진동현상을 예측할 수 있는 무한요소를 이용한 유한요소기법에 대해서 연구하였다. 지배방정식으로는 완경사방정식을 사용하였으며, 고체경계면에서의 에너지 손실효과를 고려하기 위하여 부분반사조건을 도입하였다. 외부영역 무한경계조건을 효율적으로 처리하기 위하여 새로운 무한요소를 개발하였다. 개발된 무한요소의 형상함수는 해석적 도유함수의 급수해의 진행파항을 나타내는 제 1종 Hankel 함수의 점근적 형태를 사용하여 결정하였다. 수치해석상의 효율성을 제고하기 위하여 무한요소의 시스템행렬 구성시 나타나는 무한방향으로의 적분을 해석적으로 수행하였다. 기존의 수리실험 및 타 수치모형 결과와의 비교를 통하여 본 연구에서 개발한 무한요소에 기초한 수치모형의 타당성을 입증하였다. 또한 해석의 효율성과 정도에 직접적으로 영향을 주는 무한요소의 위치결정에 대한 수치실험도 수행하였다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제20권2호
• /
• pp.1-5
• /
• 2018

Arsenic (As) is one of the elements having most harmful impact on the human health. Arsenic is a known carcinogen and arsenic contamination of drinking water is affecting on humans in many regions of the world. Adsorption has been proved most preferable technique for the removal of arsenic. Many researchers have studied various types of solid materials as arsenic adsorbent, and iron oxide and its modified forms are considered as the most effective adsorbent in terms of adsorption capacity, recovery, and economics. However, most of all iron oxides have small surface area in comparing with common adsorbents in environmental application such as activated carbon but the activated carbon has weak sorption affinity for arsenic. We have used an activated carbon as base adsorbent and iron oxide coating on the activated carbon as high affinity sorption sites and giving magnetic attraction ability. In this study, adsorption properties of arsenic and magnetic separation efficiency of the magnetized activated carbon (MAC) were evaluated with variable iron oxide content. As the iron oxide content of the MAC increased, adsorption capacity has also gradually increased up to a point where clogging by iron oxide in the pore of activated carbon compensate the increased sorption capacity. The increase of iron oxide content of the MAC also affected magnetic properties, which resulted in greater magnetic separation efficiency. Current results show that magnetically modified common adsorbent can be an efficiency improved adsorbent and a feasible environmental process if it is combined with the magnetic separation.