• 한국결정성장학회지
• /
• 제23권1호
• /
• pp.51-57
• /
• 2013

본 연구에서는 Heusler $Fe_2VAl$ 열전화합물을 제조하기 위하여 순금속 $Fe_{50}V_{25}Al_{25}$ 혼합분말을 기계적 합금화 처리하였다. $Fe_2VAl$ 열전화합물을 얻기 위하여 최적 볼밀조건 및 열처리 조건을 X선 회절분석과 시차주사 열량분석을 이용하여 조사하였다. $Fe_{50}V_{25}Al_{25}$ 혼합분말을 60시간까지 볼밀 처리한 경우 bcc 구조의 ${\alpha}$-(Fe,V,Al) 고용체가 얻어졌다. 단상의 Heusler $Fe_2VAl$ 화합물은 $Fe_{50}V_{25}Al_{25}$ 혼합분말을 60시간 동안 MA 처리 후 $700^{\circ}C$까지 열처리함으로써 얻을 수 있었다. MA 분말시료의 치밀화를 위하여 인가압력 60 MPa 및 소결온도 $900{\sim}1000^{\circ}C$에서 흑연다이를 사용하여 SPS 소결을 실시하였다. $1000^{\circ}C$에서 SPS 소결 후 얻어진 벌크체의 Vickers 경도는 870으로 매우 높은 값을 보였다. 또한 SPS 법으로 얻어진 벌크체의 밀도측정 결과, 모든 시료에서 상대밀도 90 % 이상의 금속광택을 나타내는 치밀한 소결체임을 알 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제29권1호
• /
• pp.139-147
• /
• 2008

New PPV derivatives which contain electron-withdrawing CF3F4phenyl group, poly[2-(2-ethylhexyloxy)-5-(2,3,5,6-tetrafluoro-4-trifluoromethylphenyl)-1,4-phenylenevinylene] (CF3F4P-PPV), and poly[2-(4-(2-etylhexyloxy)-phenyl)-5-(2,3,5,6-tetrafluoro-4-trifluoromethylphenyl)-1,4-phenylenevinylene] (P-CF3F4P-PPV), have been synthesized by GILCH polymerization. As the result of the introduction of the electron-withdrawing CF3F4phenyl group to the phenyl backbone, the LUMO and HOMO energy levels of CF3F4P-PPV (3.14, 5.50 eV) and P-CF3F4P-PPV (3.07, 5.60 eV) were reduced. The PL emission spectra in solid thin film are more red-shifted over 50 nm and increased fwhm (full width at half maximum) than solution conditions by raising aggregation among polymer backbone due to electron withdrawing effect of 2,3,5,6-tetrafluoro-4-trifluoromethylphenyl group. The EL emission maxima of CF3F4P-PPV and P-CF3F4P-PPV appear at around 530-543 nm. The current density-voltage-luminescence (J-V-L) characteristics of ITO/PEDOT/polymer/Al devices of CF3F4P-PPV and P-CF3F4P-PPV show that turn-on voltages are around 12.5 and 7.0 V, and the maximum brightness are about 82 and 598 cd/m2, respectively. The maximum EL efficiency of P-CF3F4P-PPV (0.51 cd/A) was higher than that of CF3F4P-PPV (0.025 cd/A).

• Nuclear Engineering and Technology
• /
• 제52권8호
• /
• pp.1756-1763
• /
• 2020

The paper studies spark plasma sintering (SPS) of industrially used UO₂-based fuel containing integral fuel burnable absorber (IFBA) of neutrons Gd₂O₃. Densification dynamics of pristine UO₂ powder and the one added with 2 and 8 wt% of Gd₂O₃ under ultrasonication in liquid has been studied under SPS conditions at 1050, 1250, and 1450 ℃. Effect of sintering temperature on phase composition as well as on O/U stoichiometry has been investigated for UO₂ SPS ceramics. Sintering of uranium dioxide added with Gd₂O₃ yields solid solution (U,Gd)O₂, which is isostructural to UO₂. SEM with EDX and metallography were implemented to analyze the microstructure of the obtained UO₂ ceramics and composite UO₂-Gd₂O₃ one, particularly, open porosity, defects, and Gd₂O₃ distribution were studied. Microhardness, compressive strength and density were shown to reduce after addition of Gd₂O₃. Obtained results prove the hypothesis on formation of stable pores in the system of UO₂-Gd₂O₃ due to Kirkendall effect that reduces sintering efficiency. The paper expands fundamental knowledge on pros and cons of fuel fabrication with IFBA using SPS technology.

• 한국세라믹학회지
• /
• 제39권6호
• /
• pp.523-527
• /
• 2002

LiMn$_2$O$_4$ compounds were synthesized by calcining a mixture of LiOH and MnO$_2$(CMD) at 47$0^{\circ}C$ for 10 h and then calcining again at $650^{\circ}C$ to 90$0^{\circ}C$ fur 48 h in air with intermediate grinding. All the synthesized samples exhibited XRD patterns for the cubic spinel phase with a space group Fd3m. The lattice parameter increased gradually as the sintering temperature rose. The electrochemical cells were charged and discharged fur 20 cycles at a current density 300$\mu$A/$\textrm{cm}^2$ between 3.5 V and 4.3 V. The voltage vs. discharge capacity curves for all the samples showed two plateaus. The LiMn$_2$O$_4$ sample calcined at 90$0^{\circ}C$ had the largest first discharge capacity. This sample exhibited the best crystallinity, had relatively large lattice parameter and had relatively large particles with rectatively homogeneous size. All the samples showed good cycling performances. Among all the samples, the LiMn$_2$O$_4$ calcined at 85$0^{\circ}C$ had relatively large first discharge capacity and very good cycling performance. The addition of excess LiOH and the mixing in ethanol considered to help the formation of the more LiMn$_2$O$_4$ phase per unit weight sample and the more stable LiMn$_2$O$_4$phase. These led to the larger discharge capacities and the better cycling performances. The cyclic voltammograms fur the second cycle of the LiMn$_2$O$_4$ samples showed the oxidation and reduction peaks around 4.05 V and 4.18 V and around 4.08 V and 3.94 V, respectively. The larger first discharge capacity of the sample calcined at the higher temperature is related to the larger lattice parameter.

• Korean Chemical Engineering Research
• /
• 제43권5호
• /
• pp.595-602
• /
• 2005

파라디옥사논에 포함된 주요한 불순물인 디에틸렌글리콜을 제거하기 위해, 파라디옥사논과 디에틸렌글리콜과의 이성분계 고액 상평형 및 혼합물의 밀도를 측정하였으며, 종(seed)을 이용한 경막 용융결정화 실험을 하였다. 얻어진 2성분계 고액 상평형 결과는 단순 공융계를 형성하였는데, 공용점은 파라디옥사논의 0.08 몰농도에서 246 K였다. 또한, 혼합물의 밀도 데이터는 ${\rho}_l=k_1+k_2x+k_3T+k_4xT$ 식과 잘 연관되었으며, 각 파라메타인 $k_1$, $k_2$, $k_3$ 및 $k_4$의 값은 0.405, 1.361, 0.002, -0.004이었다. 용융결정화 실험에서 결정 성장속도(G)는 냉각속도가 감소하거나 파라디옥사논의 초기농도가 증가할수록 감소하는 경향을 나타내었으며, 결정 성장속도식은 과냉각 온도의 1.5승에 비례하였다. 또한, 불순물의 제거 정도를 나타내는 유효 분배계수($K_{eff}$)는 냉각속도 및 PDX 초기농도가 증가할수록 증가하는 경향을 나타내었으며, 유효분배계수는 Wintermantel 모델에 의해 $K_{eef}=-0.0604+6.392{\times}Z$ 관계로 표현되었다. 최종적으로 얻어진 PDX 순도는 결정화 조작변수를 최적화하여 99% 이상으로 조절할 수 있음을 알 수 있었다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 추계학술발표대회 논문집
• /
• pp.46-49
• /
• 2003

Cu have been widely used as signal transmission materials for electrical electronic components owing to its high electrical conductivity. However, it's size have been limited to small ones due to its poor mechanical properties, Until now, strengthening of the copper at toy was obtained either by the solid solution and precipitation hardening by adding alloy elements or the work hardening by deformation process. Adding the at toy elements lead to reduction of electrical conductivity. In this aspect, if carbon nanofiber is used as reinforcement which have outstanding mechanical strength and electric conductivity, it is possible to develope Cu matrix nanocomposite having almost no loss of electric conductivity. It is expected to be innovative in electric conduct ing material market. The unidirectional alignment of carbon nanofiber is the most challenging task developing the copper matrix composites of high strength and electric conductivity In this study, the unidirectional alignment of carbon nanofibers which is used reinforced material are controlled by drawing process in order to manufacture the intermediary materials for the carbon nanofiber reinforced Cu matrix nanocomposite and align mechanism as well as optimized drawing process parameters are verified via experiments and numerical analysis. The materials used in this study were pure copper and the nanofibers of 150nm in diameter and of $10~20\mu\textrm{m}$ In length. The materials have been tested and the tensile strength was 75MPa with the elongation of 44% for the copper it is assumed that carbon nanofiber behave like porous elasto-plastic materials. Compaction test was conducted to obtain constitutive properties of carbon nanofiber. Optimal parameter for drawing process was obtained by experiments and numerical analysis considering the various drawing angles, reduction areas, friction coefficient, etc Lower reduction areas provides the less rupture of cu tube is not iced during the drawing process. Optimal die angle was between 5 degree and 12 degree. Relative density of carbon nanofiber embedded in the copper tube is higher as drawing diameter decrease and compressive residual stress is occurred in the copper tube. Carbon nanofibers are moved to the reverse drawing direct ion via shear force caused by deformation of the copper tube and alined to the drawing direction.

• 한국유기농업학회지
• /
• 제19권2호
• /
• pp.229-243
• /
• 2011

최근에 소비자들의 안전 농산물에 대한 관심과 정부의 정책적인 친환경농업에 대한 지원은 유기농 재배를 지속적으로 발전시켜 왔다. 본 연구는 유기농 재배 과원과 관행 과원간의 토양 물리성과 화학성 및 미생물성에 대한 시기별 비교분석을 통하여 변화양상을 구명하고자 수행되었다. 토양 가비중과 고상 및 경도는 유기농 과원에서 통계적으로 유의성있게 낮게 나타났다. 토양 pH와 유기물 함량은 3월에서 8월까지 증가하는 경향이 나타났고, 유기농 과원에서 관행과원에 비하여 높은 경향을 나타내었다. 전질소와 유효인산은 처리구에 상관없이 3월에서 8월까지 각각 감소하는 경향을 보였으며, 유기농 과원에서 관행과원보다 전질소는 높았으나 유효인산은 낮은 경향을 나타내었다. 토양 미생물 탄소 생체량은 처리구에 상관없이 3월부터 8월까지 증가(유기농 36%, 관행 15%)하였고, 미생물 질소생체량은 6월에 가장 높았고, 유기농 과원에서 관행과원보다 지속적으로 높은 미생물 생체량을 나타내었다. 토양중 dehydrogenase와 chitinase activity는 3월과 8월보다 6월에 가장 높았고, ${\beta}$-glucosidase activity는 시기적으로 점차 감소(유기농 38%, 관행 48%)하였으며, acid phosphatase activity는 증가하였다. 유기농 배 과원토양에서 관행재배에 비하여 6월에 조사된 acid phosphatase activity를 제외하고는 모든 효소활성이 시기에 상관없이 높은 분포를 나타내었다.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.233-233
• /
• 2017

Algal communities are important to maintain the aquatic ecosystems function. Algae have short life cycles, they respond quickly to environmental change and their diversity and density can indicate and the quality of their habitat. The bloom forms before the rice seedings have emerged, it may present a physical barrier that prevents the seedlings from penetrating the floodwater. Wind may also move the algal bloom, pushing the young plants beneath the surface. Another harmful action develops when the water dries up and the algae form a layer at the bottom of the field. The layer envelops the seedlings, which are not yet deeply rooted, and drag them to the surface when the water is let in again. Soil utilization pattern can be the mail facter affecting soil physico-chemical properties, especially in soil phosphorus (P). Solid content of the algae culture solution increased with the increase in the nitrogen rather the phosphors concentration. Phosphoric acid was treated with conventional treatments (100-0%, before transplanting time-tillering stage), 50-50%, 0-100%, and un-treated. The herbicide was treated on the 7 DAT (day after transplanting). Green algae samples were collected 20 DAT. Total phosphoric acid was the highest at 0.06 in 50-50% treatment in 20 DAT. The amount of green algae was about twice (9.8 mg/20ml) that of un-treated. Total number of green algae was 54 species(Green algae 35 species, Euglena 9 species, Stone wheel 10 species). Among the phosphoric acid treatment methods, the number of occurrences of green algae were the highest with 39 species in 0-100%, followed by 50-50%, 28 species, conventional treatments, 22 species, non-treatment, 18 species, respectively. Rice Yield was not significantly different by phosphoric treatment time, but slightly higher than un-treated. The maximal algal biomass was observed about 2weeks or 1 month after transplanting; the subsequent decrease of the biomass was related to the consumption by grazers and to a deficient light under the rice canopy. Maximal algal growth was observed just before tillering. To estimate the suitable method of phosphorus application in puddled-soil drill seeding of rice, available phosphorus appearance of algal water bloom, and rice yield were investigated in paddy soil of rice-barley double cropping system.

• 한국결정성장학회지
• /
• 제4권2호
• /
• pp.139-147
• /
• 1994

올소인산엽 결정의 육성을 수열법에 의해 행하였으며,육성결정의 성질은 X선 회절,Vickers 경도계 등을 이용하여 조사하였다. $AIPO_4$와 $GaPO_4$의 출발원료는 $AI_2O_3$또는 $Ga_2O_3$와 $NH_4H_2PO_4$의 혼합물을 고상반응시킨 뒤 얻어진 반응물을 수열처리하여 단상으로 제조하였다. 올소인산염 결정의 육성에 있어 큰 성장속도를 나타내는 수열조건은 다음과 같았다. 즉,$AIPO_4$ 결정: 온도범위, $170$~$200^{\circ}C$; 온도차, $15$~$20^{\circ}C;$수열용매, 4몰 HCI용액, $GaPO_4$결정: 온도범위, 210~$240^{\circ}C;$ 온도차, $25$~$30^{\circ}C; $ 수열용매,4몰 HCI용액이었다. 육성결정의 형태는 저온에서(1010),(1011),(0111)면이 발달하는 경향을 보였으나 육성온도가 증가함에 따라(0001)면이 잘 발달하였다. 한편, 올소인삼염 결정 $(AIPO_4/GaPO_4)$의 성질은 다음과 같았다. 즉, 격자정수$(Nm^2)$;a=0.494,c=1.094/a=0.490,1.105, 밀도 $(gcm^{-3}); 2.62/3.56$,경도$(Nm^2);1.02{\times}10^1^0/7.06{\times}10^9, $굴절율; $n_e= 1.529{\pm}0,003, n_e= 1.529{\pm}0,003/ n_e= 1.611{\pm}0,006,n_e= 1.599{\pm}0,006$,복굴절율;${\pm}0.01$ / $ {\pm}0.012$, 유전율 $(Fm^-1); 6/7$이었다.

• 한국정보통신학회논문지
• /
• 제15권8호
• /
• pp.1771-1776
• /
• 2011

미세 입자 크기를 갖는 $YBa_2Cu_3Ox$(YBCO) 초전도 분말을 이용하여 $BaPbO_3$ 첨가에 따른 $YBa_2Cu_3Ox$ 초전도 벌크의 임계전류를 향상시키는 요소인 시편의 밀도와 결정들의 정렬 상태를 향상시키고, 기공도를 감소시키기 위한 연구를 수행하였다. 졸겔법으로 미세 크기를 갖는 $YBa_2Cu_3Ox$ 초전도 분말을 합성하여 입자의 크기가 0.2~1 ${\mu}m$의 미세한 분포를 갖는 초전도 분말을 사용하고, $YBa_2Cu_3Ox$ 초전도 시편의 입자 성장을 촉진시키고, 기공과 입계간의 약연접을 감소시키기 위하여 금속 물질 및 구조 화합물인 $BaPbO_3$를 10~30 wt%를 첨가하여 시편을 제작하고 특성을 관찰하였다. 나노 크기를 갖는 YBCO 분말과 $BaPbO_3$ 20 wt%를 첨가하여 제작한 $YBa_2Cu_3Ox$ 초전도 시편은 일반적인 벌크 제작법으로 제작된 시편과 비교하여 임계전류가 20% 향상된 4.74A를 얻었다.