• 대한치과기공학회지
• /
• 제34권2호
• /
• pp.75-81
• /
• 2012

Purpose: All ceramic crown, made from zirconia instead of metal for core material, is recognized the best esthetical prosthesis. Recently, high-priced zirconia blocks and expensive CAD/CAM machines come into use for making zirconia core. In this study, slip casting process is adapted to evaluate the possibility of the recycling the remained parts of zirconia block after machining. Methods: Remained zirconia blocks were reduced to powders with zirconia mortar, and screened with 180 mesh sieve. Passed powders were ball milled under various conditions to obtain the optimum zirconia slip for casting. Solid casting method was used for casting the specimens with plaster mold. Formed specimens were dried and biscuit fired at $1,000^{\circ}C$ for 1 hour. Biscuit fired specimens were finished with exact shape of square pillar. Finished specimens were fired from $1,200^{\circ}C$ to $1,550^{\circ}C$ at $50^{\circ}C$ intervals for 1 hour. Linear shrinkage, apparent porosity, water absorption, bulk density, and flexural strength were tested. Microstructures were observed by SEM. Results: Above examinations indicated that the optimum firing temperture was $1,500^{\circ}C$, and when fired at this temperature for 1 hour, apparent porosity was 0% and flexural strength was 680MPa. SEM photomicrographs showed uniform 200~300nm grain size, which is equal with microcture of sintered commercial zirconia block. when compare 24% linear shrinkage of cast specimen with 20% linear shrinkage of CAD/CAM machined block, it was estimated that the size controlling of cast core was not so difficult. Conclusion: According to the all of this experimental results, the cast zirconia core produced from the remained parts of zirconia block was possible to use for all ceramic denture.

• Journal of Electrochemical Science and Technology
• /
• 제8권3호
• /
• pp.250-256
• /
• 2017

A graphene electrode with a novel in-plane structure is proposed and successfully adopted for use in supercapacitor applications. The in-plane structure allows electrolyte ions to interact with all the graphene layers in the electrode, thereby maximizing the utilization of the electrochemical surface area. This novel structure contrasts with the conventional out-of-plane stacked structure of such supercapacitors. We herein compare the volumetric capacitances of in-plane- and out-of-plane-structured devices with reduced multi-layer graphene oxide films as electrodes. The in-plane-structured device exhibits a capacitance 2.5 times higher (i.e., $327F\;cm^{-3}$) than that of the out-of-plane-structured device, in addition to an energy density of $11.4mWh\;cm^{-3}$, which is higher than that of lithium-ion thin-film batteries and is the highest among in-plane-structured ultra-small graphene-based supercapacitors reported to date. Therefore, this study demonstrates the potential of in-plane-structured supercapacitors with high volumetric performances as ultra-small energy storage devices.

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권1호
• /
• pp.40-50
• /
• 2012

폐열의 활용은 연료전지시스템의 효율의 제고에 중요하다. SOFC/GT/ST 하이브리드시스템은 연료전지시스템 폐열의 전력화에 가스터빈 및 증기터빈을 활용하는 방식이다. 본 논문은 SOFC/GT/ST 하이브리드시스템에 대한 스택의 작동온도와 전류밀도, 가스터빈의 압력비가 시스템의 성능에 미치는 영향 등을 시뮬레이션을 통하여 검토한 것이다. 그 결과로 SOFC/GT/ST 하이브리드시스템은 단독 SOFC시스템과 비교하여 효율의 급격한 변화를 완화시키며 또한 효율을 크게 제고시키고 있음을 확인하였다.

• 여성건강간호학회지
• /
• 제15권4호
• /
• pp.362-371
• /
• 2009

Purpose: This study was implemented to investigate the level of awareness of osteoporosis among urban women. Methods: A survey was conducted with a sample size of 434 adult females who resided in metropolises in Korea such as Seoul, Gyeonggi-do, Pusan, Gyeongsangnam-do, Kangwondo, Jeju-do and Jeollanam-do. Osteoporosis Awareness Scale was consisted of five areas with total number of 31 questions. The questionnaire's scale was 1 to 4 point, 4 point being the highest understanding level. The collected data were analyzed using descriptive statistics method. Results: The average awareness level of subjects was 2.38 and significant different depending on participants' age, education level, previous encounter with any information about osteoporosis, preventive behavior of osteoporosis, bone mineral density test, fracture history, diet control experience, and regular exercise. In osteoporosis awareness level by five areas, preventive behaviors 2.76 resulted in the highest score and characteristics of osteoporosis 2.51, bone physiology 2.46, improving bone health 2.38, and risk factors 1.80 followed respectively. Conclusion: We should implement bone health programs from a various perspective in order to raise women's osteoporosis awareness. In addition, We need follow-up studies on whether or not the increase on awareness level actually would result in changing in their behavior.

• Bulletin of the Korean Chemical Society
• /
• 제35권8호
• /
• pp.2245-2250
• /
• 2014

A new accepter unit, 6,7-difluoro-2,3-dihexylquinoxaline, was prepared and utilized for the synthesis of the conjugated polymers containing electron donor-acceptor pair for OPVs. New series of copolymers with dioctyloxybenzodithiophene as the electron rich unit and 6,7-difluoro-2,3-dihexylquinoxaline as the electron deficient unit are synthesized. The solid films of poly[2,6-(4,8-bis(2-ethylhexyloxy)benzo[1,2-b:4,5-b']dithiophene)-alt-5,8-(6,7-difluoro-2,3-dihexylquinoxaline)] (PBQxF) and poly[2,6-(4,8-bis(2-ethylhexyloxy) benzo[1,2-b:4,5-b']dithiophene)-alt-5,8-(6,7-difluoro-2,3-dihexyl-5,8-di(thiophen-2-yl) quinoxaline)] (PBDTQxF) show absorption bands with maximum peaks at about 599 and 551 nm and the absorption onsets at 692 and 713 nm, corresponding to band gaps of 1.79 and 1.74 eV, respectively. The devices comprising PBQxF with $PC_{71}BM$ (1:2) showed open-circuit voltage ($V_{OC}$) of 0.64 V, short-circuit current density ($J_{SC}$) of $1.58mA/cm^2$, and fill factor (FF) of 0.39, giving power conversion efficiency (PCE) of 0.39%. To obtain absorption in the longer wavelength region, thiophene units without any alkyl group are incorporated as one of the monomers in PBDTQxF, which may result in low solubility of the polymers to lead lower efficiency.

• 한국환경복원기술학회지
• /
• 제10권5호
• /
• pp.31-39
• /
• 2007

This study was carried out to evaluation the recycled waste soils from construction site for planting soil. For this purpose, the concentrations of polluted materials and the physico-chemical properties were measured at recycled soil samples of an industrial waste treating company in the Metropolitan landfill area. The concentrations of polluted materials did not exceed to the standard critical levels of soil pollution in all analyzed items. The measures of the samples soil texture (loamy sand), bulk density (1.09~1.32g/$cm^3$), saturated hydraulic conductivity ($1.6{\times}10^{-3}{\sim}1.8{\times}10^{-3}$cm/sec), solid phase distribution (0.4~0.5$m^3/m^3$), porosity (0.5~0.6$m^3/m^3$), Ex. $K^+$ (1.0~1.2cmol/kg), Ex. $Mg^{2+}$ (0.2~0.6cmol/kg) were identified as not worse than those of conventional planting soil. But the sample soils have serious problems for planting soil such as high levels of pH (9.6~11.5), EC (0.78~1.84ds/m) and Ex. $Ca^{2+}$ (25.6~34.5cmol/kg), low level of organic matter (0.2~0.3%). It is required to improve pH, EC and Ex. $Ca^{2+}$ of sample soils. Consequently, the results suggested a high potential of recycling of the wastes soils for planting soil.

• 한국결정성장학회지
• /
• 제1권2호
• /
• pp.23-33
• /
• 1991

Mn-Zn Ferrite는 단결정을 성장하기 위하여 용융하는 동안 불균질 용융과 ZnO휘발의 고유특성을 갖는 재료이다. 그 결과로, 결정성장축을 따라 양이온의 분포가 불균일 하게 된고 또한 기존의 Bridgman법에서는 도가니내에서 용융대가 장시간 유지됨으로써 백금입자가 결정안으로 침입하게된다. 이들은 훼라이트의 자기적 성질을 저하시키는 성질을 갖고 있다. 그러나 새로운 성장법에서는 이러한 단점들을 극복하고 양질의 단결정을 얻기 위하여 결정성장 인자들의 관계를 고찰하였으며 그 인자들은 다음과 같다 : 도가니내의 melt 높이, melt의 표면장력과 밀도, 계면에서의 melt거동, 도가니와 고액계면의 형상, 원료공급속도, 결정성장속도. 아울러, 성장된 결정의 조성을 분석하였을 때 초기조성과 비교하여 $\textrm{Fe}_2\textrm{O}_3$ 1.5 mol%, MnO, Zn 2.0 mol% 이내로 조성 변동은 각각 억제되었고 성장결정면 (110)에서 화확적인 etching 법을 이용하여 광학현미경을 통해 결정내부등을 관찰하였으며, 자기적 특성등을 측정하였다.

• 한국세라믹학회지
• /
• 제40권7호
• /
• pp.620-624
• /
• 2003

LiCo$_{y}$Mn$_{2-y}$O$_4$ samples were synthesized by calcining a mixture of LiOH.$H_2O$, MnO$_2$ (CMD) and CoCO$_3$ calcining at 40$0^{\circ}C$ for 10 h and then calcining twice at 75$0^{\circ}C$ for 24 h in air with intermediate grinding. All the synthesized samples exhibited XRD patterns for the cubic spinel phase with a space group Fd(equation omitted)m. The electrochemical cells were charged and discharged for 30 cycles at a current density 600 $mutextrm{A}$/$\textrm{cm}^2$ between 3.5 and 4.3 V. As the value of y increases, the size of particles becomes more homogeneous. The first discharge capacity decreases as the value of y increases, its value for y=0.00 being 92.8 mAh/g. The LiMn$_2$O$_4$ exhibits much better cycling performance than that reported earlier. The cycling performance increases as the value of y increases. The efficiency of discharge capacity is 98.9％ for y=0.30. The larger lattice parameter for the smaller value of y is related to the larger discharge capacity. The more quantity of the intercalated and the deintercalated Li in the sample with the larger discharge capacity brings about the larger capacity fading rate.ate.

• Smart Structures and Systems
• /
• 제13권4호
• /
• pp.615-636
• /
• 2014

Aluminium Foam Sandwich (AFS) panels are becoming always more attractive in transportation applications thanks to the excellent combination of mechanical properties, high strength and stiffness, with functional ones, thermo-acoustic isolation and vibration damping. These properties strongly depend on the density of the foam, the morphology of the pores, the type (open or closed cells) and the size of the gas bubbles enclosed in the solid material. In this paper, the vibrational performances of two classes of sandwich panels with an Alulight(R) foam core are studied. Experimental tests, in terms of frequency response function and modal analysis, are performed in order to investigate the effect of different percentage of porosity in the foam, as well as the effect of the random distribution of the gas bubbles. Experimental results are used as a reference for developing numerical models using finite element approach. Firstly, a sensitivity analysis is performed in order to obtain a limit-but-bounded dynamic response, modelling the foam core as a homogeneous one. The experimental-numerical correlation is evaluated in terms of natural frequencies and mode shapes. Afterwards, an update of the previous numerical model is presented, in which the core is not longer modelled as homogeneous. Mass and stiffness are randomly distributed in the core volume, exploring the space of the eigenvectors.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.63-63
• /
• 2010

Using both experimental and theoretical approaches, we have investigated the adsorption properties of an organic molecule (HATCN), which is used in OLEDs as an efficient hole injection layer, on metal and inert surfaces. We have also studied the structural and electronic properties of such interfaces and the dependences on deposition thickness. We have observed different trends in work function changes with different surfaces. Our photoelectron spectroscopic measurements have revealed an abnormal phenomenon in HATCN on a metal (Cu) surface: the work function decreases at lower coverage (~monolayer) of HATCN on a metal (Cu) surface, but it increases back and becomes higher than that of a bare Cu surface at higher coverage. It has, on the contrary, been observed that the work function of graphene surface just increases as the HATCN coverage increases. Our first-principles density functional calculations has not only verified our experimental observations, but also disclosed the underlying mechanism of such abnormal and different work function behaviors. We have found that the change in work function results from mutual polarization induced by the geometrical deformation and the bond dipole formed at the interface due to the charge redistribution. At low coverage of HAT-CN on Cu substrate, the former reduces the work function significantly by pulling down the vacuum level, while the latter tends to push up the vacuum level resulting in the work function increase.