• 한국식품저장유통학회지
• /
• 제11권2호
• /
• pp.170-174
• /
• 2004

Fresh-cut 멜론의 연화 억제를 위해 열처리를 행하였으며 그에 따른 저장 중 품질 특성과 texture를 조사하였다. 직접적인 열처리에 의한 과실의 품질 열하를 방지하기 위하여 전과(全果, whole fruit)를 저온(5$0^{\circ}C$)에서 열처리하고 저온(5$^{\circ}C$)에서 24시간 저장한 후, 멜론 cylinder를 가공하였다. 저장중의 포장 내 가스 조성의 변화를 통한 호흡특성, 색도 변화, pH, 가용성 고형분 함량 등의 품질 특성 및 texture를 측정하였다. 열처리한 멜론 cylinder의 호흡 특성은 저장 기간이 증가함에 따라 포장 내 산소 함량은 감소하고 이산화탄소 함량은 증가하였다. 특히 무처리구에 비하여 열처리한 멜론 cylinder의 포장내 산소 소비량 및 이산화탄소 발생량이 크게 나타났다. 전과상태에서 저온(5$0^{\circ}C$) 열처리는 멜론 cylinder의 경도 유지에 크게 영향을 주었으며 저장 6일의 경도에서 열처리 시간에 관계없이 무처리구에 비하여 경도가 크게 나타났다. 특히 5$0^{\circ}C$에서 20분 열처리한 구의 경도가 가장 큰 값을 나타냈다. 열처리 시간에 따른 색도의 차이는 미비하였으나 무처리구에 비하여 색도 변화 정도가 작게 나타났으며 특히 모든 열처리구의 L-value와 coma value가 대조구에 비해 높게 나타났다. 또한 5$0^{\circ}C$에서 20분 열처리 하여 가공한 멜론 cylinder의 pH와 가용성 고형분 함량이 저장 기간의 경과에도 유지되었으며 품질 변화가 가장 작게 나타났다.

• 한국정보통신학회논문지
• /
• 제10권7호
• /
• pp.1301-1306
• /
• 2006

알루미늄 합금은 자동차부품 및 전자부품산업 개발에 크게 기여하고 있는 소재로서, 제조방법 중 냉？온간 단조 공법에 의해 제조하는 것이 대량 생산되어지는 자동차 및 전자산업부품개발에 있어서 매우 효율적이다. 따라서, 본 연구에서는 차세대 콤프레샤 실린더 블록 개발을 위하여,AI소재 (AI-Mg-Si계합금)를 활용, 냉 -온간 단조법을 이용 하여 개발하고자 한다. 이를 위해, 제조 시편의 미세조직 및 기계적 성질을 조사하였는데,미세조직은 공정형으로 구성되었으며, $Mg_2Si$의 중간상이 석출되었다. 그리고 인장강도는 291.7MPa 로 나타났으며, 그러한 결과를 바탕으 로 차세대 콤프레샤 실린더 블록시제품을 제작하였다.

• 설비공학논문집
• /
• 제1권4호
• /
• pp.319-329
• /
• 1989

Heat transfer phenomena during inward melting and solidification process of the phase change material were studied expertimentally. The phase change medium was 99% pure n-docosane paraffin ($C_{22}H_{46}$). The solid-liquid interface motion during phase change was recorded photographically. Measurements were made on the temperature, the solid-liquid interface, the melted or frozen mass and the various energy components stored or extracted from the cylinder wall. For melting, the experimental results reaffirmed the dominant role played by the conduction at an early stage, by the natural convection at longer time. For solidification, natural convection effects in the superheated liquid were modest and were confined to short freezing time. Although the latent energy is the largest contributor to the total stored or extracted energy, the aggregate sensible energies can make a significant contribution, especially at large cylinder wall superheating or subcooling, large initial phase change material subcooling or superheating.

• 소음진동
• /
• 제6권5호
• /
• pp.671-677
• /
• 1996

This paper presents the analytical method for predicting turbulence- induced noise in the multilayered cylinder composed of an outer hose, an inner fluid and an internal core. It is assumed that an infinite axisymmetric cylinder is located horizontally in water with free stream velocity and the turbulent boundary layer (TBL) surrounding the outer hose is fully developed and homogeneous. The transfer function at the core surface due to the propagation of the pressure fluctuation within the TBL is formulated using the linearized Navier-Stockes equation for solid and fluid. In the estimation of the energy spectrum of wall pressure fluctuation, the empirical formula proposed by Strawderman based on the Corcos model is used. A general algorithm for the calculation of the pressure level at the surface of a core, that is, turbulence- induced noise, is presented. Through the detailed numerical simulation, it is found that the major noise mechanism is the propagation of the bulge wave along hose.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1601-1606
• /
• 2004

In this paper, the unsteady behavior of the viscous flow field past an impulsively started elliptic cylinder is studied numerically. In order to analyze flow field, we introduce vortex particle method. The vorticity transport equation is solved by fractional step algorithm which splits into convection term and diffusion term. The convection term is calculated with Biot-Savart law, the no-through boundary condition is employed on solid boundaries. The diffusion term is modified based on the scheme of particle strength exchange. The particle redistributed scheme for general geometry is adapted. The flows around an elliptic cylinder are investigated for various attack angles at Reynolds number 200. The comparison between numerical results of present study and experimental data shows good agreements.

• 대한기계학회논문집B
• /
• 제28권7호
• /
• pp.809-817
• /
• 2004

In this paper, the unsteady behavior of the viscous flow field past an impulsively started elliptic cylinder is studied numerically. In order to analyze flow field, we introduce vortex particle method. The vorticity transport equation is solved by fractional step algorithm which splits into convection term and diffusion term. The convection term is calculated with Biot-Savart law, the no-through boundary condition is employed on solid boundaries. The diffusion term is modified based on the scheme of particle strength exchange. The particle redistributed scheme for general geometry is adapted. The flows around an elliptic cylinder are investigated for various attack angles at Reynolds number 200. The comparison between numerical results of present study and experimental data shows good agreements.

• 대한기계학회논문집B
• /
• 제21권1호
• /
• pp.24-35
• /
• 1997

Melting process inside in a vertical cylinder has been investigated numerically to observe heat transfer characteristics in the latent heat storage vessel applied to the thermal storage system. The time-dependent boundary fitted coordinate system was introduced to overcome the difficulty caused by the moving boundary. The present results are in good agreement with the available previous data when the initial subcooling effect of the solid phase is not considered. It is found that the melting is promoted by the natural convection, but is delayed by the initial subcooling effect of the solid phase.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.1318-1328
• /
• 1993

Expression of chinese cabbage was conducted in order to investigate its dewatering behavior. Chipped cabbage was packed into cylinder and pressed by piston up to the predetermined pressure on Instron-1000. The rates of dewatering were affected domintantly by the applied pressure, but not significantly by the packed amount of cabbage in the cylinder. The pressure effect was increased very abruptly at first, but the increase rate was very low at high pressure greater than 20 MPa, showing great deviation from linear dependence of flow rate on pressure in Darcy's Law. Therefore, water expression from cabbage was not Newtonian flow of water through cell wall. In fact, the squeezed water contained a lot of solid particles, showing destruction of cell wall. The content of solid particles in expressed water was only slightly lower than the dry matter content of fresh chinese cabbage, determined by drying oven method.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.483-487
• /
• 2011

In the present study, a CFD program based on a finite volume method was developed by using an unstructured polyhedral grid system for the accurate simulation with the complex geometry of computational domain. To simulate the transient flow induced by the moving solid object, the program used a fractional step method and a ALE (Algebric Lagrangian-Eulerian) method. The grid deformation for the moving of solid object were performed with a spring analogy based on the center coordinate of each computational grid. To verify the present program with these methodologies, the numerical results of the flow around the fixed and oscillating circular cylinder were compared with the previous numerical results.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2000년도 추계학술대회 논문집(Proceeding of the KOSME 2000 Autumn Annual Meeting)
• /
• pp.61-67
• /
• 2000

Many research works for improving a boundary lubrication performance have been executed by using solid lubricants, and been tried to apply an engine lubrication. However those general lubricants like MoS$_2$ or PTFE have not been applied on engines due to the extreme conditions such as very high temperature and pressure by combustion process in a cylinder. A copper nickel alloy fine particle has been introduced and studied. In this Paper the lubricant using the alloy Particles is applied on a marine diesel engine and assessed by the engine performance test The results showed the increase of cylinder pressure related strongly to the engine efficiency as well as the improving the engine lubrication performance.