• 한국대기환경학회지
• /
• 제20권6호
• /
• pp.803-810
• /
• 2004

Water contents in fine particles at Seoul and Gosan are estimated by using a gas/particle equilibrium model, SCAPE (Simulating Composition of Atmospheric Particles at Equilibrium). Also, sensitivity of particulate inorganic ionic concentrations on the total ionic species is estimated. Water content at Gosan is more sensitive to ambient relative humidity (RH) than Seoul. At both sites water content is most sensitive to sulfate concentration among sulfate, nitrate, and ammonium. Solid salts levels and compositions are also studied.

• 한국대기환경학회지
• /
• 제11권1호
• /
• pp.69-76
• /
• 1995

Water content and strong acidity are estimated for ambient particles measured between Fall, 1991 and Summer, 1992 in Seoul using a gas/aerosol equilibrium model, called SCAPE. Particle water content and formation of solid species are closely related to ambient relative humidity and ionic concentrations. Generally, water content of particles is high during the night and summer. Estimated particle strong acidity level of Seoul is similar to that of Los Angeles, U.S.A. Acidity of wet and dry depositions in Seoul is discussed.

• 한국재료학회지
• /
• 제34권4호
• /
• pp.185-193
• /
• 2024

In this study, NASICON-type Li_1+XGa_XTi_2-X(PO₄)₃ (x = 0.1, 0.3 and 0.4) solid-state electrolytes for all-solid-state batteries were synthesized through the sol-gel method. In addition, the influence on the ion conductivity of solid-state electrolytes when partially substituted for Ti⁴⁺ (0.61Å) site to Ga³⁺ (0.62Å) of trivalent cations was investigated. The obtained precursor was heat treated at 450 ℃, and a single crystalline phase of Li_1+XGa_XTi_2-X(PO₄)₃ systems was obtained at a calcination temperature above 650 ℃. Additionally, the calcinated powders were pelletized and sintered at temperatures from 800 ℃ to 1,000 ℃ at 100 ℃ intervals. The synthesized powder and sintered bodies of Li_1+XGa_XTi_2-X(PO₄)₃ were characterized using TG-DTA, XRD, XPS and FE-SEM. The ionic conduction properties as solid-state electrolytes were investigated by AC impedance. As a result, Li_1+XGa_XTi_2-X(PO₄)₃ was successfully produced in all cases. However, a GaPO₄ impurity was formed due to the high sintering temperatures and high Ga content. The crystallinity of Li_1+XGa_XTi_2-X(PO₄)₃ increased with the sintering temperature as evidenced by FE-SEM observations, which demonstrated that the edges of the larger cube-shaped grains become sharper with increases in the sintering temperature. In samples with high sintering temperatures at 1,000 ℃ and high Ga content above 0.3, coarsening of grains occurred. This resulted in the formation of many grain boundaries, leading to low sinterability. These two factors, the impurity and grain boundary, have an enormous impact on the properties of Li_1+XGa_XTi_2-X(PO₄)₃. The Li_1.3Ga_0.3Ti_1.7(PO₄)₃ pellet sintered at 900 ℃ was denser than those sintered at other conditions, showing the highest total ion conductivity of 7.66 × 10^-5 S/cm at room temperature. The total activation energy of Li-ion transport for the Li_1.3Ga_0.3Ti_1.7(PO₄)₃ solid-state electrolyte was estimated to be as low as 0.36 eV. Although the Li_1+XGa_XTi_2-X(PO₄)₃ sintered at 1,000 ℃ had a relatively high apparent density, it had less total ionic conductivity due to an increase in the grain-boundary resistance with coarse grains.

• 한국응용과학기술학회지
• /
• 제30권4호
• /
• pp.790-796
• /
• 2013

Roasting 온도를 $80{\sim}140^{\circ}C$로 달리한 한방차의 성분 변화를 분석한 결과는 다음과 같다. 처리온도의 상승에 따라 수분함량이 감소하고, 일부 탄화가 발생하며 조회분 함량이 상대적으로 상승하는 소폭 변화가 있었고, 조단백질 및 조지방 함량은 거의 변화가 없는 것으로 나타났다. 벤조피렌 함량은 0.17~0.35ppb으로 처리온도가 상승할수록 $B({\alpha})P$ 함량이 증가하는 경향을 보였다. 이러한 결과를 볼 때, 처리온도와 원재료에 따라 $B({\alpha})P$ 함량에 차이가 발생한 것으로 나타났는데, roasting의 경우 실제 내부온도는 약 $200^{\circ}C$내외에 그치지만 roaster 표면의 온도는 약 $2,000^{\circ}C$에 이르기 때문에 이 표면과 직접 접촉한 부분에서 일부의 $B({\alpha})P$가 생성된 것으로 판단된다. 한방차의 고형분용출율을 0.18~0.35%(w/w)를 나타내었는데, roasting 온도가 상승할수록 고형분용출율이 감소하는 경향을 나타내었다. 처리온도가 $80{\sim}110^{\circ}C$처리구간에서는 큰 변화를 나타내지 않은 반면 $110{\sim}140^{\circ}C$처리구간에서는 고형분용출율이 급격히 감소하는 경향을 보였다. 처리온도가 상승할수록 고형분용출율이 감소하는 것은 내부 조직이 치밀하여 상대적으로 용출이 어렵기 때문으로 생각된다.

• 대한기계학회논문집
• /
• 제13권3호
• /
• pp.517-527
• /
• 1989

본 연구에서는 국내 난방용 주연료인 연탄의 연소특성의 규명을 위한 기본 모델로서 일차적으로 형상을 단순화한 중공 원통형 고체연료의 연소모델을 개발하여 고체연료의 열분해 및 열분해 가스의 연소현상을 이론적으로 고찰하여 고체연료의 연속특성을 규명한다.

• Environmental Engineering Research
• /
• 제13권3호
• /
• pp.112-118
• /
• 2008

Residual solid in excess sludge treated by hydrothermal reaction was investigated as raw material for its recycling. Treated excess sludge and residual solid were also focused on their content change during hydrothermal reaction. Two kinds of excess sludge, obtained from a local food factory and a municipal wastewater treatment process, were tested under various conditions. Following hydrothermal reaction, depending on the reaction conditions, biodegradable substrates in treated excess sludge appeared to increase. The separated residual solid was a composite composed of organic and inorganic materials. The proportion of carbon varied from 34.0 to 41.6% depending on reaction conditions. Although 1.89% of hazardous materials were detected, SiO2 (Quartz) was a predominant constituent of the residual solid. X-ray diffraction (XRD) experiments revealed that the residual solid was of a partially amorphous state, suggesting that the residual solids could be easily converted to stable and non harmful substances through a stabilization process. Thus, this technology could be successfully used to control excess sludge and its reuse.

• 펄프종이기술
• /
• 제39권3호
• /
• pp.52-59
• /
• 2007

This paper confirms that high solid coating can increase coating speed and reduce drying cost. Low solid coating color with the synthetic thickener and high solid coating color with the rheology modifier and with higher ratio of GCC were prepared. Coated paper was then produced with an industrial coater, varying coating speed and dryer temperature in order to keep the moisture content of the coated paper constant. Coating color concentration was able to be increased from 66% to 69% and from 68% to 71% without an adverse effect on coating color rheology. With a help of the rheology modifier, the increased ratio of GCC in high solid coating did not show harmful effects on the coated paper quality.

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권10호
• /
• pp.1421-1424
• /
• 2005

The aim of this study was to evaluate the effect of two diets different in crude fibre content and ingredients on performance and on caecal characteristics of rabbits around weaning. Thirty litters from thirty New Zealand White does were divided at Day 18 in two groups fed, respectively, a low fibre concentrate (LFC, consisting mainly of soybean meal, delactated whey, barley) from Day 18-28 followed by a creep feed (CF, consisting mainly in alfalfa meal, barley and wheat bran) from Day 29-32, and a CF from Day 18-32. After weaning (32 days) both groups were fed the CF ad libitum for two weeks. During the pre-weaning period, mortality, milk intake and solid feed intake (from Day 20) were recorded daily, while the live weight of kits was recorded twice, at 18 and 32 days. At day 28, one rabbit/litter was slaughtered in order to obtain data on caecal content characteristics. After weaning, the rabbits were located in collective cages, feeding ad libitum CF; feed intake, live weight and mortality were recorded weekly for two weeks. During the preweaning period, there were no differences between the groups in milk and solid feed intake and, by consequence, in live weight at weaning; instead, the mortality was higher (12.5 vs 4.5%) for the group (A) that changed diet at 28 days. Group A showed also a higher caecal pH (6.12 vs. 5.72), propionate to butyrate ratio (0.73 vs. 0.46), ammonia content (9.3 vs. 7.1 mmol/l), but a lower total volatile fatty acid content (66.8 vs. 82.1 mmol/l) than B Group, probably due to the dried milk whey in the concentrate. After weaning, there were no significant differences between the two groups. The authors concluded that the use of a low fibre concentrate for suckling rabbits is not recommended.

• 한국환경복원기술학회지
• /
• 제18권2호
• /
• pp.105-118
• /
• 2015

This study was conducted to obtain proper amount of solid swine manure and poultry manure in the beginning phase of Cornus kousa growth by investigating the initial germination, seedling growth increment, dry weight, chlorophyll content change, body nutrient uptake and chemical changes of soil according to the concentration of solid swine manure and poultry manure fertilization. When treated with solid swine manure and poultry manure, seed germination rate was the highest in the control. However germination rate showed a tendency to decrease when treated with high concentration of swine manure and poultry manure. The survey results of the growth increment were all higher than that of the control. At the 1.0% treatment of both swine and poultry manure, the seedling height growth was highest. Poultry manure treatment made higher result than swine manure treatment at each treatment. Dry weight was the highest at the 1.0% treatment by both swine and poultry manure. Dry amount declined sharply at the 2.0% treatment. Poultry manure was higher in weight than swine manure at every treatment. Chlorophyll content was the highest at the 1.0% treatment by both swine and poultry manure, but declined sharply at the 2.0% treatment. The survey content was higer than that of the control. The amount of nutrients absorbed in the seedling body was generally high at the 1.0% treatment of swine manure and poultry manure. For the planting soil of Cornus kousa the higher concentration of swine manure and poultry manure was, the lower pH became. However, nitrogen, got higher. available phosphoric acid, exchangeable K, Na, and Mg got higher.

• Journal of Microbiology and Biotechnology
• /
• 제23권3호
• /
• pp.335-342
• /
• 2013

In this study, we compared the performance of two control systems, fuzzy logic control (FLC) and conventional control (CC). The control systems were applied for controlling temperature and substrate moisture content in a solidstate fermentation for the biosynthesis of amylase and protease enzymes by Aspergillus oryzae. The fermentation process was achieved in a 200 L rotating drum bioreactor. Three factors affecting temperature and moisture content in the solid-state fermentation were considered. They were inlet air velocity, speed of the rotating drum bioreactor, and spray water addition. The fuzzy logic control system was designed using four input variables: air velocity, substrate temperature, fermentation time, and rotation speed. The temperature was controlled by two variables, inlet air velocity and rotational speed of bioreactor, while the moisture content was controlled by spray water. Experimental results confirmed that the FLC system could effectively control the temperature and moisture content of substrate better than the CC system, resulting in an increased enzyme production by A. oryzae. Thus, the fuzzy logic control is a promising control system that can be applied for enhanced production of enzymes in solidstate fermentation.