Journal of Korea Technical Association of The Pulp and Paper Industry (펄프종이기술)

Korea Technical Association of the Pulp and Paper Industry (한국펄프종이공학회)
권호 표지

Studies on Relations between High Solid Coating and Quality Changes(II) - Effect of high solid coating on coated paper properties -

고농도 도공과 품질변화의 상관성 연구(2보) -도공지의 품질과 고농도 도공의 효과-

  • Lee, Yong-Kyu (Dept. of Paper Science & Engineering, College of Forest and Environmental Sciences, Kangwon National University) ;
  • Yoo, Sung-Jong (EN paper Co. LTD.) ;
  • Cho, Byoung-Uk (Dept. of Paper Science & Engineering, College of Forest and Environtal Sciences, Kangwon National University) ;
  • Kim, Yong-Sik (EN paper Co. LTD.)
  • 이용규 (강원대학교 산림환경과학대학 제지공학과) ;
  • 유성종 (EN paper 주식회사) ;
  • 조병욱 (강원대학교 산림환경과학대학 제지공학과 창강제지연구소) ;
  • 김용식 (EN paper 주식회사)
  • Published : 2007.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

This paper confirms that high solid coating can increase coating speed and reduce drying cost. Low solid coating color with the synthetic thickener and high solid coating color with the rheology modifier and with higher ratio of GCC were prepared. Coated paper was then produced with an industrial coater, varying coating speed and dryer temperature in order to keep the moisture content of the coated paper constant. Coating color concentration was able to be increased from 66% to 69% and from 68% to 71% without an adverse effect on coating color rheology. With a help of the rheology modifier, the increased ratio of GCC in high solid coating did not show harmful effects on the coated paper quality.

Keywords

References

  1. Charles Klass, Coating Pigment : From Size and Shape to nanotech, Solution (9):34-35 (2005)
  2. Ludwig Huggenberger, Manfred Arnold and Hana-Heinz Koster, Ground calcium carbonate, in Pigment Coating and Surface sizing of Paper, Lebtinen E. (Ed.), Book 11, Chapter 6, Fapet Oy (2000)
  3. Patrick A. C. Gane, Philip M. McGenity, and Philip Watters, Factors influencing the runnability of coating colors at high speed, Tappi J. 75(5):61-73 (1992)
  4. Hideaki Nisogi, Douglas W. Bousfield, and Poerre F. Lepoutre, Influence of coating rheology on final coating properties, Tappi J. 83(2): 00-106 (2000)
  5. John Roper, Rheology of pigment slurries and coating formulations, in Pigment Coating and Surface sizing of Paper, Lebtinen E. (Ed.), Book 11, Chapter 31, Fapet Oy (2000)
  6. 김병수, 정현채, 박종열, 도공액의 구성성분이 고농도 도공특성에 미치는 영향 (제1보), 펄프.종이기술 27(4): 50-55 (1995)
  7. 김병수, 정현채, 박종열, 도공액의 구성성분이 고농도 도공특성에 미치는 영향 (제2보), 펄프.종이기술 28(3): 23-29 (1996)
  8. 이학래, 성용주, 고전단 점도 측정에 의한 도공액의 패킹 특성 연구, 펄프.종이기술 29(2):7-15 (1997)
  9. Baumeister, M., Quality Optimization by Control of Coating Structure, 1980 TAPPI Coating Conference Proceedings, TAPPI Press, Atlanta, p.11