• 한국생물공학회:학술대회논문집
• /
• 2001.11a
• /
• pp.315-316
• /
• 2001

In this study various nutritional and environmental parameters such as, initial moisture content, pH. inoculum size, air rate, sample size and nutrient supplement that influence pigment production were evaluated in solid-state cultures. optimum initial moisture content and pH were determined to be 50% and 6.0, respectively. The supplement of the substrate with different carbon, nitrogen, and mineral source reveals a more inhibitive effect as the substrate concentration increase. optimum aeration rate was determined to be 2vvm in flask culture. The maximum amount of red pigment, 3500 OD/g dried fermented rice, was obtained in optimum conditions which is obtained in solid flask culture.

• Microbiology and Biotechnology Letters
• /
• v.51 no.4
• /
• pp.449-456
• /
• 2023

Sugar or dextrose increases the cost of production of xanthan gum by Xanthomonas campestris. Brewers' Spent Grain (BSG) was chosen as a source of fermentable sugars. BSG is a significant industrial by-product generated in large quantities from the breweries. Primarily used as animal feed due to its high fiber and protein content, BSG holds great potential as an economically and ecologically sustainable substrate for fermenting biomolecules. This study explores BSG's potential as a cost-effective carbon source for producing xanthan, utilizing Xanthomonas campestris NCIM 2961. An aqueous extract was prepared from BSG and inoculated with the bacterium under standard fermentation conditions. After fermentation, xanthan gum was purified using a standard protocol. The xanthan yield from BSG media was compared to that from MGYP media (control). The fermentation parameters, including pH, temperature, agitation and duration were optimized for maximum xanthan gum yield by varying them at different levels. Following fermentation, the xanthan gum was purified from the broth by alcoholic precipitation and then dried. The weight of the dried gum was measured. The obtained xanthan from BSG under standard conditions and commercial food-grade xanthan were characterized using FTIR. The highest xanthan yields were achieved at 32 ℃, pH 6.0, and 72 h of fermentation at 200 rpm using BSG media. The FTIR spectra of xanthan from BSG media closely resembled that of commercial food-grade xanthan. The results confirm the potential of BSG as a cost-effective alternative carbon source for xanthan production, thereby reducing production costs and solid waste.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.6
• /
• pp.1506-1508
• /
• 2010

$LiMnBO_3$ was successfully synthesized by a solid-state reaction method both with and without a carbon coating. Adipic acid was used as source material for the carbon coating. $LiMnBO_3$ was composed of many small polycrystalline particles with a size of about 50 - 70 nm, which showed a very even particle morphology and highly ordered crystalline particulates. Whereas the carbon coated $LiMnBO_3$ was well covered by mat-like, fine material consisting of amorphous carbon derived from the carbonization of adipic acid during the synthetic process. Carbon coated cell exhibited improved and stable discharge capacity profile over the untreated. Two cells delivered an initial discharge capacity of 111 and 58 mAh/g for $LiMnBO_3$/C and $LiMnBO_3$, respectively. Carbon coating on the surface of the $LiMnBO_3$ drastically improved discharge capacity due to the improved electric conductivity in the $LiMnBO_3$ material.

• Polymer(Korea)
• /
• v.33 no.5
• /
• pp.397-406
• /
• 2009

We have fabricated source-drain electrodes for OTFTs using a screen-printing technique with carbon-black pastes as conductive paste. And effects of dispersants contents (SOP 10-40%) on the dispersity of carbon-black pastes and characteristics of screen-printed source-drain electrodes for OTFTs using two types of dispersants (DB-2150, DB-9077) were investigated. As contents of both dispersants were increased the dispersity of carbon-black mill-bases was improved, whereas the carbon-black pastes exhibited different dispersion characteristics. For the case of DB-2150, the dispersity of the pastes was improved with increasing dispersant content and the storage modulus G' in their rheology characteristics were reduced. But, for the DB-9077, the storage modulus G' of pastes were increased with dispersant content due to the flocculated network structure formed by interactions among carbon-black powders and dispersants. But, since this flocculated network structure of the pastes using DB-9077 resulted in the conduction path of carbon-black structures, the conductivities of screen-printed electrodes and mobilities of the OTFTs with them were better than those using pastes with DB-2150.

• Carbon letters
• /
• v.25
• /
• pp.103-112
• /
• 2018

Hierarchically porous, chemically activated carbon materials are readily derived from biomass using hydrothermal carbonization (HTC) and chemical activation processes. In this study, empty fruit bunches (EFB) were chosen as the carbon source due to their sustainability, high lignin-content, abundance, and low cost. The lignin content in the EFB was condensed and carbonized into a bulk non-porous solid via the HTC process, and then transformed into a hierarchical porous structure consisting of macro- and micropores by chemical activation. As confirmed by various characterization results, the optimum activation temperature for supercapacitor applications was determined to be $700^{\circ}C$. The enhanced capacitive performance is attributed to the textural property of the extremely high specific surface area of $2861.4m^2\;g^{-1}$. The prepared material exhibited hierarchical porosity and surface features with oxygen functionalities, such as carboxyl and hydroxyl groups, suitable for pseudocapacitance. Finally, the as-optimized nanoporous carbons exhibited remarkable capacitive performance, with a specific capacitance of $402.3F\;g^{-1}$ at $0.5A\;g^{-1}$, a good rate capability of 79.8% at current densities from $0.5A\;g^{-1}$ to $10A\;g^{-1}$, and excellent life cycle behavior of 10,000 cycles with 96.5% capacitance retention at $20A\;g^{-1}$.

• Transactions of the Korean hydrogen and new energy society
• /
• v.34 no.3
• /
• pp.256-266
• /
• 2023

Hydrogen production can be classified based on the energy source, primary reactor type, and whether or not it emits carbon dioxide. Utilizing color representation proves to be an effective means of expressing these distinctive characteristics. Among the various clean hydrogen production techniques, there has been a growing interest in turquoise hydrogen production, which involves the decomposition of methane or other fossil fuels. This method offers advantages in terms of large-scale production and cost reduction through the sale of solid-carbon byproduct. In this study, an extensive literature review was conducted to select and analyze several promising candidates for turquoise hydrogen production processes. The efficiency and economics of these processes were evaluated using stream data reported in the literature sources. The findings indicate that the levelized cost of hydrogen production (LCOH) is significantly influenced by the sales of byproducts, specifically the solid-carbon and carbon monoxide byproducts.

• Applied Microscopy
• /
• v.45 no.4
• /
• pp.242-248
• /
• 2015

In this paper, three carbon sources, i.e., solid graphite, gaseous CH4 and liquid ethanol, and one solid silicon source were employed to synthesize SiC/C nanocomposite powders by arc-discharge plasma. The processing conditions such as the component ratios of raw materials, atmospheric gases, etc. were adjusted for controllable synthesis of the nanopowders. It is indicated that both of solid graphite and silicon can be co-evaporated and reacted to form nanophases of cubic ${\beta}$-SiC with ~50 nm in mean size and a little free graphite; the carbon atoms decomposed from gaseous $CH_4$ favor to combine with the evaporated silicon atoms to form the dominant SiC nanophase; liquid carbon source of ethanol can also be used to harvest the main ${\beta}$-SiC and minor 6H-SiC phases in the assembly of nanoparticles. The as-prepared SiC/C nanocomposite powders were further purified by a heat-treatment in air and their photocatalytic performances were then greatly improved.

• Journal of Powder Materials
• /
• v.1 no.2
• /
• pp.119-198
• /
• 1994

The characteristics of various important microstructural factors of WC-base hard- metals (cemented carbides) such as the amount of Co metal binder phase, the carbide grain size, the microstructural defects acting as a fracture source, the solid solubility of tungsten in the binder phase affected by the carbon content, the precipitation of $Co_3W$, the domain size of binder phase, the formation of ${\beta}-free$ layer or Co-rich layer and CVD or PVD coated layer, and the effects of these factors on the flexural strength of the hardmetals are reviewed.

• KSBB Journal
• /
• v.20 no.1 s.90
• /
• pp.60-65
• /
• 2005

The objective of this work was to evaluate a solid-state fermentation process for the practical production of arachidonic acid(AA) by Mortierella alpina ATCC 32222. In the present investigation, batch culture kinetics for both submerged- and solid-state fermentations was carried out at $25^{\circ}C$ to identify the relationship between growth and arachidonic acid (AA) production. Glucose and yeast extract were used in submerged fermentations by using flasks, while rice bran was used as a sole raw material in the other type of fermentations by using a series of Petri dishes. It was evident that a mixed-growth associated pattern existed between the two variables, irrespective of modes of fermentations. The effect of carbon to nitrogen (CfN) ratio on AA production in solid-state fermentation was studied in the range of 6.5 - 20. As a result, an optimum condition was found to be 6.5. Supplementary carbon source was not necessary to meet the optimum C/N ratio. Unlike the Previous results obtained by other researchers, a supplement of sodium glutamate up to $4\%$ (w/w) to the rice bran medium did not have a positive effect on the AA productivity. However, an increase in AA productivity was obtained with the rice bran medium supplemented with sesame oil.

• Korean Journal of Materials Research
• /
• v.29 no.5
• /
• pp.304-310
• /
• 2019

Chemical vapor deposition method using $CH_4$ gaseous hydrocarbons is generally used to synthesize large-area graphene. Studies using non-gaseous materials such as ethanol, hexane and camphor have occasionally been conducted. In this study, large-area graphene is synthesized via chemical vapor deposition using polyethylene as a carbon precursor. In particular, we used a poly glove, which is made of low-density polyethylene. The characteristics of the synthesized graphene as functions of the growth time of graphene and the temperature for vaporizing polyethylene are evaluated by optical microscopy and Raman spectroscopy. When the polyethylene vaporizing temperature is over $150^{\circ}C$, large-area graphene with excellent quality is synthesized. Raman spectroscopy shows that the D peak intensity increased and the 2D peak intensity decreased with increasing growth time. The reason for this is that sp3 bonds in the graphene can form when the correct amount of carbon source is supplied. The quality of the graphene synthesized using polyethylene is similar to that of graphene synthesized using methane gas.