• Journal of Industrial Technology
• /
• v.29 no.B
• /
• pp.107-113
• /
• 2009

For the environmental safety of the operating room and patient healthcare, the closed type rebreathing system is widely adopted. In order to reduce the anesthesia gas during surgery, the mixing ratio of anesthesia gas with breathing air should be precisely controlled. Generally, the breathing air passes through the vaporizer to mix the anesthesia gas, but there is a difficulty in controlling the mixing ratio precisely. In this paper, the stand-alone style vaporizer is designed and the operating characteristics are investigated. The vaporizer measures the temperature and pressure in the vaporizing chamber and chamber temperature is precisely controlled by proportional controlled heater. Exact quantity of anesthesia media is feeded by PID controlled peristaltic pump and vaporized gas is mixed with breathing air flow by PWM controlled solenoid valve. The experimental result shows that the vaporizer has an excellent command following performances that it can be applied to the low flow anesthesia system.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.88.6-88
• /
• 2002

In this study, the pneumatic servo valve was developed, and the study results could be summarized as follows; 1. A servo solenoid was designed, and its electromagnetic field was interpreted and the system's transient response was identified by using a commercial analysis program. 2. A program for analysis the flow in the spool was developed, and a study was conducted on the flow rate of the nozzle depending upon the pressure ratio between the upstream pressure and the downstream pressure, when the valve is fully opened in the spool and the flow force depending upon a displacement of the spool in the valve. 3. A PWM analog controller was designed and manufactured in...

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.7 s.112
• /
• pp.739-745
• /
• 2006

This paper presents a novel type of hybrid dispensing head for IC fabrication and surface mount technology. The proposed mechanism consists of solenoid valve and piezoelectric stack as actuators, and provides positive-displacement and jet dispensing. The positive-displacement dispensing can produce desired adhesive amount without viscosity effect, while the jet dispensing can produce high precision adhesive amount. In order to determine the relationship between required voltage of the piezoelectric actuator and needle displacement, both static and dynamic analysis are undertaken, In addition, finite element analysis is performed in order to find optimal design parameters. Dispensing flow rate and pressure in the chamber are evaluated through fluid dynamic model.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.663-664
• /
• 2008

In this study, A special quality analysis and experiment for low power consumption type pneumatic on-off micro valve was performed. And flow characteristics of the micro valve by stroke change was numerically investigated. As a result, it is shown that magnetic force(2.4N) is exerted enough to move poppet with 0.3mm stroke with 0.01 seconds of response time, and that there is no magnetic force emitted by yoke.

• Journal of ILASS-Korea
• /
• v.9 no.1
• /
• pp.1-7
• /
• 2004

This paper describes the characteristics of injection rate and macroscopic behavior of fuel spray injected from common-rail type diesel injectors with different nozzle geometries. The injection rates according to the nozzle geometries were measured at different energizing duration of the injector solenoid and injection pressure by using the Bosch's injection rate meter based on the pressure variation in the tube. The spray behaviors injected from the different nozzles were visualized using the spray visualization system composed of an Ar-ion laser, an ICCD camera, and a synchronization system at various injection and ambient pressures. It is revealed that VCO nozzle has higher spray tip velocity at the early stage of injection duration and wider spray cone angle than the mini-sac nozzles. Also the spray cone angle is increased with the increase of nozzle diameter.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.245-245
• /
• 2000

후각기는 후각신경과 삼차신경의 기능을 객관적이고 정량적으로 검사할 수 있는 기기로, 객관적으로 인정받을 수 있는 후각기의 제작에는 많은 어려움이 있기 때문에, 현재까지 후각신경과 삼차신경의 기능을 정확하게 측정할 수 있는 방법이 없었다. 그러나, 산업이 발달하고 공해가 더욱 심해질수록 후각의 변화가 생기고, 비강 내 질환이나, 공해물질 등에 의해 삼차신경이 민감한 반응을 일으키므로, 앞으로는 이 신경들의 측정이 중요할 것으로 여겨진다. 또한 각종 산업분야에서 이제까지 사람의 미각이나 후각에 의존하여 제품을 생산해오던 방법을 변화시켜 객관적인 수치를 이용하여 제품을 생산할 수 있다. 따라서 이번 연구에서는 사람이나 동물에게 다양한 후각물질을 원하는 정확한 농도로 투여하는 기기로, 온도와 습도를 사람의 신체 조건과 동일한 공기와 혼할하여 원하는 정확한 농도(ppm)의 후각 자극을 만들어 mass flow controller와 solenoid valve를 이용하여 square-shape의 자극모양이 되도록 한 후, 피검자에게 자극하여 전기생리학적 반응을 얻는 기기를 개발하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.821-826
• /
• 2006

This paper presents a novel type of hybrid dispensing head for IC fabrication and surface mount technology. The proposed mechanism consists of solenoid valve and piezoelectric stack as actuators, and provides positive-displacement and jet dispensing. The positive-displacement dispensing can produce desired adhesive amount without viscosity effect, while the jet dispensing can produce high precision adhesive amount. In order to determine the relationship between required voltage of the piezo actuator and needle displacement, both static and dynamic analysis are undertaken, In addition, finite element analysis is performed in order to find optimal design parameters. Dispensing flow rate and pressure in the chamber are evaluated through fluid dynamic model.

• 정보저장시스템학회:학술대회논문집
• /
• 2005.10a
• /
• pp.64-68
• /
• 2005

This paper proposes the rotary actuator to apply the designed actuator to the drive of the CF II size. New focus magnetic circuit is considered at this research. The rotary actuator including this circuit is designed to have the dynamic characteristic satisfying the mechanical specification as well as the portable devices. Finally, the adaptability to the portable devices was demonstrated by the finite element analysis and optimization of structural part.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.186-188
• /
• 1994

Fundamental characteristics of Giant Magnetostrictive Alloy Terfenol-D$(Tb_{0.3}Dy_{0.7}Fe_{1.9\sim1.95})$ were measured by experiments. Magnetostrictions of Terfenol-D samples whose lengths are 15 and 25 mm have been measured under compressive stress from 0 to 14 MPa, when the applied magnetic field was up to 1200 Oe. The relationship between magnetostriction and field is shown graphically in the form of $H-{\lambda}$, curve. For the experiment, solenoid magnet and lever-arm-type stress equipment were designed and fabricated. The magnetostriction is measured by laser displacement measuring system and the stress applied to the sample is measured by load cell.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.10a
• /
• pp.234-236
• /
• 2003

The cryogenic system for inductive superconducting fault current limiter (SFCL) has been investigated recently. In this investigation, the sub-cooled nitrogen cryogenic system was adopted to enhance the performance of DC reactor for 6.6㎸/200A inductive SFCL. In sub-cooled nitrogen state at 64K, the critical current value and the thermal conductivity are larger than those of saturated nitrogen state at 77K and the electrical insulation capacitance should be remarkably enhanced. The solenoid type of 84mH superconducting DC reactor was fabricated and cooled down to 64K by using sub-cooled cooling method with GM-cryocooler and rotary pump. The fabrication techniques of cryogenic system and some experimental results such as cooling down characteristic are introduced in this study. Moreover, the sub-cooled nitrogen cryogenic system was detailedly introduced in this paper.