• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1421-1423
• /
• 1996

In this study, the effect of solar cell cover glass on the solar cell performance is evaluated. Silicon solar cell (active area:4*6cm, efficiency:12.6% at AMO condition) is used for this study. ITO(Indium tin Oxide) film thickness of the ITO/AR/substrate glass/solar cell structure samples are $40{\AA}$, $60{\AA}$, $160{\AA}$, $240{\AA}$ respectively. The solar cell maximum output power on the stacking structure variations showed 465mW in the AR/ITO/substrate glass/solar cell, and minimum output power showed 403mW in the AR/substrate glass/solar cell. The maximum output power of the solar cell on the ITO thickness variations of the ITO/AR/substrate glass/solar cell showed 460mW at $40{\AA}$ then decrease output power as ITO thickness increase. For environment tests, all samples are exposed UV light in the vacuum chanber. The output power degradation of AR(UVR)/substrate glass/solar cell stacking structure is small compared with ITO/AR(UVR)/substrate glass/solar cell stacking structure.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.28 no.3
• /
• pp.91-108
• /
• 2002

Whitening agents are eagerly demanded especially by oriental women who often suffers from the pigmentary disorders such as melasma and solar lentigines. As these pigmentary disorders are exacerbated by ultraviolet (UV), the whitening agents could exert its effect not only by inhibiting melanin synthesis but also by inhibiting UV activated signals. Eumelanin protects UV-induced DNA damages so that the chemicals which could reduce UV-induced DNA damages might be the ideal lightening agents. The effect of newly synthesized antioxidants, a-tocopheryl ferulate, on protective effect for UV-induced DNA damages as well as inhibiting melanin synthesis are briefly shown. For clinical evaluation, our results of the efficacy of lightening agents on treating pigment macules in combination with chemical peeling are shown. Furthermore, newly developed facial image analyzers to quantitatively evaluate the improvement of pigment macules are introduced.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.8
• /
• pp.2743-2750
• /
• 2011

Lanthanide(III)-cored complex as a wavelength conversion material has been successfully designed and synthesized for highly efficient dye-sensitized solar cells, for the first time, since light with a short wavelength has not been effectively used for generating electric power owing to the limited absorption of these DSSCs in the UV region. A black dye (BD) was chosen and used as a sensitizer, because BD has a relatively weak light absorption at shorter wavelengths. The overall conversion efficiency of the BD/WCM device was remarkably increased, even with the relatively small amount of WCM added to the device. The enhancement in $V_{oc}$ by WCM, like DCA, could be correlated with the suppression of electron recombination between the injected electrons and $I_3{^-}$ ions. Furthermore, the short-circuit current density was significantly increased by WCM with a strong UV light-harvesting effect. The energy transfer from the Eu(III)-cored complex to the $TiO_2$ film occurred via the dye, so the number of electrons injected into the $TiO_2$ surface increased, i.e., the short-circuit current density was increased. As a result, BD/WCM-sensitized solar cells exhibit superior device performance with the enhanced conversion efficiency by a factor of 1.22 under AM 1.5 sunlight: The photovoltaic performance of the BD/WCM-based DSSC exhibited remarkably high values, $J_{sc}$ of 17.72 mA/$cm^2$, $V_{oc}$ of 720 mV, and a conversion efficiency of 9.28% at 100 mW $cm^{-2}$, compared to a standard DSSC with $J_{sc}$ of 15.53 mA/$cm^2$, $V_{oc}$ of 689 mV, and a conversion efficiency of 7.58% at 100 mW $cm^{-2}$. Therefore, the Eu(III)-cored complex is a promising candidate as a new wavelength conversion coadsorbent for highly efficient dye-sensitized solar cells to improve UV light harvesting through energy transfer processes. The abstract should be a single paragraph which summaries the content of the article.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1590-1591
• /
• 2011

In this paper, the UV corona camera was developed using the solar blind and Multi Channel Plate(MCP) technology for the target localization of UV camera. UV camera developed a $6.4^{\circ}{\times}4.8^{\circ}$ of the field of view as a conventional camera to diagnose a wide range of slightly enlarged, and power equipment to measure the distance between the camera and the distance meter has been attached. The UV camera was developed and measured using a UV image, as applied voltage increased ultraviolet images of the phenomenon could be obtained. And we investigated properties of UV corona image on insulator in salt water environments. From the results, the breakdown voltage was decreased and UV images were taken at low voltages and the UV image is rapidly increased with increasing High voltage.

• Journal of Korean Society on Water Environment
• /
• v.26 no.4
• /
• pp.707-712
• /
• 2010

Nitrogen-doped $TiO_2$ particles have been successfully prepared using titanium tetraisopropoxide as the Ti source and urea as the nitrogen source. As-prepared nitrogen-doped $TiO_2$ was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Brunauer-Emmett-Teller method (BET) and ultraviolet-visible light (UV-vis) absorption spectra techniques. Photocatalytic degradation of Methylene Blue (MB) has been carried out in both solar light (UV-vis) and the visible region (${\lambda}=420nm$). Nitrogen-doped $TiO_2$ exhibits higher activity than the commercial $TiO_2$ photocalyst, particularly under visible-light irradiation because bandgap of nitrogen-doped $TiO_2$ becomes remarkably decreased.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.3_4
• /
• pp.414-421
• /
• 2004

To reduce farmer's stress from solar radiation and ultraviolet radiation(UV), the sunshade hat with a large brim and special structure for ventilation was developed and tested with manikin heads outdoors at previous study(Kim and Choi, 2002). To evaluate the protection efficiency of the sunshade hat, human trial test was performed at outdoors. The results were as follows; Skin temperatures(7 sites), heart rate, temperature inside the hats, temperature and relative humidity inside clothing on the back in wearing developed sunshade hat were significantly lower than those in wearing the controlled hat. In subjective sensation, subjects answered to feel significantly hotter, more humid and more uncomfortable in wearing the controlled hat. But relative humidity inside the hats was significantly higher in wearing developed hat. In rectal temperature, there were no significant differences between two hats.

• Journal of the Korean Home Economics Association
• /
• v.42 no.1
• /
• pp.99-113
• /
• 2004

To protect farmers from solar radiation and UV, the movable sunshade tent was designed and its protection efficiency was measured in the artificial chamber and outdoors. Sunshade tent and the existing farmer's hat were examined. The results were as followes； Heart rate, total body weight loss and temperature of clothing microclimate on the chest and the back were lower in using sunshade tent than those in wearing existing hat in two experiments. In subjective sensation, subjects answered to feel significantly hotter and more uncomfortable in wearing existing hat in two experiments. Rectal temperature was significantly lower using the sunshade hat in experiment at outdoors(p<0.001).

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.300.2-300.2
• /
• 2013

Periodically shaped pillar-arrays and hole-arrays were fabricated on a Si wafer. Geometric features are similar in a periodic length of 4 ${\mu}m$ and a depth of 2 ${\mu}m$. For the hole-array patterns, positive PR processes were performed. UV exposed PR patterns were removed during a developing process to leave shapes of inversely replicated from a glass photomask. Meanwhile, negative PR processes were taken for the pillar-array patterns. UV exposed PR patterns were remained on a Si substrate having a same feature of patterns of a glass photomask. For an electrical aspect, a pillar structure has a short carrier-collection length resulting in the improved open-circuit voltage of 609 mV from 587 mV of a planar device. An improved performance may be achieved to reduce recombination loss along the patterning surface.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1998.11a
• /
• pp.206-215
• /
• 1998

Using of geosynthetics with linear materials(sand, gravel, clay soil) is rapidly increased in landfill. With geosynthetics, geotextiles often expose to solar radiation(Ultraviolet) on long terms during the installation. In this paper, the results will represent the strength retention rate and tensile retention rate of geotextiles between outdoor exposed and protected by 15cm thickness of soil. As a result of cumulating solar radiation in geotextiles was increased, the strength retentions rate of P.P(500g/$m^2$), P.P(700g/$m^2$) and P.P(1000g/$m^2$) were decreased and the lower weight of unit area of geotextiles, the faster decrease of strength retention rate. P.E.T(600g/$m^2$) was showed a distinctive trend that the strength retention rate increased. The tensile retention rate of tested geotextiles was decreased during the simulation. However, the strength and tensile retention rate of geotextiles covered by soil had changed insignificantly. Therefore, it can surmise that the soil covering will help geotextiles to be protected from UV effecting

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.3
• /
• pp.448-453
• /
• 2018

PV module protective film plays an important role in protecting the solar cell from external environment by anti-hydrolysis polyester, UV resistance and mechanical properties. The backsheet was manufactured by using Roll-to-Roll dry laminating process. The backsheet structure is composed of 3 layers, which are PE, PET, and Fluorine polymer films. In this study, we have experimented the variation of thermal conductivities depending on MgO inputs 10% to 25% in order to confirm the dependence of the module efficiencies. High thermal conductive backsheet can increase the module output power efficiency because the heat is dissipated by spreading out the internal heat. Long-term environment weatherability tests were conducted for confirming 25 year reliability in the field such as PCT, UV, and power efficiency degradations. As the evaluation result, high thermal conductivity can be effective for increase of power efficiency of solar panel by using thermal conductive MgO masterbatch.