• Wind and Structures
• /
• v.27 no.1
• /
• pp.41-57
• /
• 2018

Concentrated Solar Photovoltaic (CPV) is a promising alternative to conventional solar structures. These solar tracking structures need to be optimized to be competitive against other types of energy production. In particular, the selection of the structural parameters needs to be optimized with regards to the dynamic wind response. This study aims to evaluate the effect of the main structural parameters, as selected in the preliminary design phase, on the wind response and then on the weight of the steel support structure. A parametric study has been performed where parameters influencing dynamic wind response are varied. The study is performed using a semi-deterministic time-domain wind analysis method. Unsteady aerodynamic model is applied for the shape of the CPV structure collector at different configurations in conjunction with a consistent mass-spring-damper model with the corresponding degrees of freedom to describe the dynamic response of the system. It is shown that, unlike the static response analysis, the variation of the peak wind response with many structural parameters is highly nonlinear because of the dynamic wind action. A steel structural optimization process reveals that close attention to structural and site wind parameters could lead to optimal design of CPV steel support structure.

• New & Renewable Energy
• /
• v.20 no.1
• /
• pp.52-60
• /
• 2024

This study conducted an economic analysis of renewable heat energy by estimating the levelized cost of heat production (LCOH) of ST and GSHP and comparing it with the cost of alternative fuels. The LCOH of ST ranged from 396.8 KRW/kWh to 578.7 KRW/kWh (small-scale), 270.3 KRW/kWh to 393.3 KRW/kWh (large-scale), and 156.3 KRW/kWh to 220.7 KRW/kWh for GSHP. The economic feasibility of ST and GSHP was analyzed by comparing the calculated LCOH and the fuel costs such as gas and kerosene prices. Moreover, scenario analyses were conducted for installation subsidies under the current system to examine the changes in the economics of renewable thermal energy.

• KIEAE Journal
• /
• v.15 no.5
• /
• pp.83-88
• /
• 2015

Purpose: Photovoltaic system is a technique for producing electrical power by utilizing solar energy, which can be used over 20 years with simple maintenance. However, in the case of photovoltaic systems, the energy conversion efficiency decreases as the surface temperature of module increases, compared with other renewable energy technologies. In this regard, PVT module can increase the energy utilization of a composite module as producing heat and electricity simultaneously by using solar energy. Currently, many researches have been promoting in order to develop a high efficiency PVT module in Korea. However, there are a few studies about the performance of the modules corresponding the shape of types and various heat exchangers of the PVT module. In this study, the electrical performance was measured by the change of the ambient temperature and the circulating water temperature using the fabricated PVT module. Method: Experiments were performed using a solar simulator. And this experiment was assumed that the weather condition was in each season, as winter, spring, autumn and summer. It was identified that the I-V curve associated with the change of the experimental conditions and confirmed the change in the electrical characteristics. Result: As a result, it was figured out that the surface temperature and the electrical performance changes in case conditions. The electrical performance was calculated in different temperature condition and the power production was confirmed by the change of module temperature.

• Journal of KIISE:Software and Applications
• /
• v.41 no.7
• /
• pp.481-491
• /
• 2014

The power production using renewable energy is more important because of a limited amount of fossil fuel and the problem of global warming. A concentrative photovoltaic system comes into the spotlight with high energy production, since the rate of power production using solar energy is proliferated. These systems, however, need to sophisticated tracking methods to give the high power production. In this paper, we propose a hierarchical tracking system using modular Bayesian networks and a naive Bayes classifier. The Bayesian networks can respond flexibly in uncertain situations and can be designed by domain knowledge even when the data are not enough. Bayesian network modules infer the weather states which are classified into nine classes. Then, naive Bayes classifier selects the most effective method considering inferred weather states and the system makes a decision using the rules. We collected real weather data for the experiments and the average accuracy of the proposed method is 93.9%. In addition, comparing the photovoltaic efficiency with the pinhole camera system results in improved performance of about 16.58%.

• Journal of Environmental Science International
• /
• v.28 no.2
• /
• pp.219-224
• /
• 2019

In this study, we evaluated the energy production from plant-microbial fuel cells using representative indoor plants, such as Scindapsus aureus and Clatha minor. The maximum power density of microbial fuel cell (MFC) using S. aureus ($3.36mW/m^2$) was about 2 times higher than that of the MFC using C. minor ($1.43mW/m^2$). It was confirmed that energy recovery is possible using plant-MFCs without fuel. However, further research is needed to improve the performance of plant-MFCs. Nevertheless, plant-MFCs have proved their potential as a novel energy source to overcome the limitations of the conventional renewable energy sources such as wind power and solar cells, and could be employed to a power source for the sensor in charge of the fourth industrial revolution.

• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.4
• /
• pp.331-336
• /
• 1998

This review was conducted to analyse the effect of nutrition on physiological responses; heat production of domestic animal during exercise. Overall, it can be concluded that the major factors likely to affect heat production in domestic animals during exercise (including work load) are body weight, speed, the gradients attempted, feed intake, ambient conditions (including temperature and solar radiation) and altitude. On nutrition-exercise interactions, for example, it has been concluded that animals on better quality diets produce more heat than those on poorer quality ones, and that glucose as well as acetate are metabolized as energy sources during both rest and exercise.

• The Korean Journal of Ecology
• /
• v.9 no.1
• /
• pp.59-71
• /
• 1986

Net production, dead material increments were measured, and annual respiration loss was simulated through a year to determine the gross production at the Phragmites longivalvis, Carex scabrifolia and Zoysia sinica stand on Okryudeung, a sand bar of the Nagdong river estuary. The maximum live biomass for above-ground organs of the three stands occured in October, i.e., 1, 985, 744 and 1, 013g/m2, and belowground net productions were estimated to be 650, 440 and 412g/m2, respectively. Materials died or shedding from live aboveground organs during the growth season were estimated to be 167, 81 and 0 g/$m^2$. From the results of simulation, annual variation of respiratiion was primarily dependent on the annual variation of temperature through a year. For annual respiration loss in three stands, 21.893, 6.147 and 5.036kg $CO_2/m^2$ were calculated, respectively. Corresponding gross productions were 72, 203, 22, 109 and 19, 909kcal/$m^2$. Respiration of belowground organs corresponded to 65%, 66% and 37% of the total plant respiration, and annual respiration loss accounted for 85%, 78% and 71% of the annual gross production. In view of efficiency of solar energy utilization, 5.8%, 1.8% and 1.6% of incident light energy were converted to gross production of plants during a year. With incident light energy during the growth season from April to September, energy utilizations for net production were estimated to be 1.2%, 0.4% and 0.6% at the three stands.

• Journal of Environmental Science International
• /
• v.17 no.9
• /
• pp.969-980
• /
• 2008

This research was performed to simulate shellfish production systems and sales in Gamak Bay, South Korea. To study the way the shellfish system generates maxima, a numerical model was developed to simulate the model under a control and a number of different scenarios. The program calculates the EMERGY flows by multiplying the flows of energy and materials by the appropriate solar transformity. In this study, an energy systems model was built to simulate the variation of sustainability for oyster aquaculture. The results of the simulation based on 2005 data that as oyster production yield slightly increases, money and assets increase to a steady state. When the program is run control simulation, the system reaches carrying capacity after 8 years. The simulation of models with price of purchased inputs increased with 3.5% inflation rate per year showed maximum benefit of shellfish production occurs after 6 years but amounts are less than control simulation, and then decreases slightly in money and yield results. The results with 3.5% inflation and increase of oyster price annually showed steady and slightly increase of money and yield.

• New & Renewable Energy
• /
• v.7 no.2
• /
• pp.18-27
• /
• 2011

Management flexibility to adapt its future actions in response to altered future market conditions can expand the value of an investment opportunity by improving its upside potential without the change in the downside losses. Module manufacturers in solar industry continuously have to decide how much and when its production capacity should be expanded with regards to the demand in the global markets. Either over- or under-investment can cause sunk and/or opportunity costs to the module manufacturers. Option of exercising the additional investments only on favorable opportunities can increase total value of the investment. This paper analyzes the case which shows that the expansion of production capacity with more expandibility can have more value than the rigid plan of capacity expansion. The expansion option value is equivalent to KRW 38.286 billion, thus switching the negative NPV of the initial investment opportunity into the positive value. High volatility and the high growth in the cashflows as the major business features of the renewable energy provide condition where real options can play the crucial role in increasing the investment value as well as in determining the size and timing of capacity expansion in the course of capital budgeting process.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.90.1-90.1
• /
• 2010

Due to the rapidly diminishing energy sources and higher energy production cost, the interest in dye-sensitized solar cells (DSSCs) has been increasing dramatically in recent years. A typical DSSC is constructed of wide band gap semiconductor electrode such as $TiO_2$ or ZnO that are anchored by light-harvesting sensitizer dyes and surrounded by a liquid electrolyte with a iodide ion/triiodide ion redox couple. DSSCs based on one-dimensional nano-structures, such as ZnO nanorods, have been recently attracting increasing attention due to their excellent electrical conductivity, high optical transmittance, diverse and abundant configurations, direct band gap, absence of toxicity, large exiton binding energy, etc. However, solar-to-electrical conversion performances of DSSCs composed of ZnO n-type photo electrode compared with that of $TiO_2$ are not satisfactory. An important reason for the low photovoltaic performance is the dissolution of $Zn^{2+}$ by the adsorption of acidic dye followed by the formation of agglomerates with dye molecules which could block the I-diffusion pathway into the dye molecule on the ZnO surface. In this paper, we prepared the DSSC with the ZnO electrode using the chemical bath deposition (CBD) method under low temperature condition (< $100^{\circ}C$). It was demonstrated that the ZnO seed layers played an important role on the formation of the ZnO nanostructures using CBD. To achieve truly low-temperature growth of the ZnO nanostructures on the substrates, a two-step method was developed and optimized in the present work. Firstly, ZnO seed layer was prepared on the FTO substrate through the spin-coating method. Secondly, the deposited ZnO seed substrate was immersed into an aqueous solution of 0.25M zinc nitrate hexahydrate and 0.25M hexamethylenetetramine at $90^{\circ}C$ for hydrothermal reaction several times.