• 제목/요약/키워드: solar cells

검색결과 2,357건 처리시간 0.025초

봉지막이 박형 실리콘 칩의 파괴에 미치는 영향에 대한 수치해석 연구 (Effects of Encapsulation Layer on Center Crack and Fracture of Thin Silicon Chip using Numerical Analysis)

  • 좌성훈;장영문;이행수
    • 마이크로전자및패키징학회지
    • /
    • 제25권1호
    • /
    • pp.1-10
    • /
    • 2018
  • 최근 플렉서블 OLED, 플렉서블 반도체, 플렉서블 태양전지와 같은 유연전자소자의 개발이 각광을 받고 있다. 유연소자에 밀봉 혹은 봉지(encapsulation) 기술이 매우 필요하며, 봉지 기술은 유연소자의 응력을 완화시키거나, 산소나 습기에 노출되는 것을 방지하기 위해 적용된다. 본 연구는 봉지막(encapsulation layer)이 반도체 칩의 내구성에 미치는 영향을 고찰하였다. 특히 다층 구조 패키지의 칩의 파괴성능에 미치는 영향을 칩의 center crack에 대한 파괴해석을 통하여 살펴보았다. 다층구조 패키지는 폭이 넓어 칩 위로만 봉지막이 덮고있는 "wide chip"과 칩의 폭이 좁아 봉지막이 칩과 기판을 모두 감싸고 있는 "narrow chip"의 모델로 구분하였다. Wide chip모델의 경우 작용하는 하중조건에 상관없이 봉지막의 두께가 두꺼울수록, 강성이 커질수록 칩의 파괴성능은 향상된다. 그러나 narrow chip모델에 인장이 작용할 때 봉지막의 두께가 두껍고 강성이 커질수록 파괴성능은 악화되는데 이는 외부하중이 바로 칩에 작용하지 않고 봉지막을 통하여 전달되기에 봉지막이 강하면 강한 외력이 칩내의 균열에 작용하기 때문이다. Narrow chip모델에 굽힘이 작용할 경우는 봉지막의 강성과 두께에 따라 균열에 미치는 영향이 달라지는데 봉지막의 두께가 작을 때는 봉지막이 없을 때보다 파괴성능이 나쁘지만 강성과 두께의 증가하면neutral axis가 점점 상승하여 균열이 있는 칩이 neutral axis에 가까워지게 되므로 균열에 작용하는 하중의 크기가 급격히 줄어들게 되어 파괴성능은 향상된다. 본 연구는 봉지막이 있는 다층 패키지 구조에 다양한 형태의 하중이 작용할 때 패키지의 파괴성능을 향상시키기 위한 봉지막의 설계가이드로 활용될 수 있다.

Ecosysteme de I′Etang de Berre (Mediterranee nord-occidentale) : Caracteres Generales Physiques, Chimiques et Biologiques

  • Kim, Ki-Tai
    • 환경생물
    • /
    • 제22권2호
    • /
    • pp.247-258
    • /
    • 2004
  • Climatological, hydrological and planktonical research studies, measurements of primary production and photosynthetic efficiency from December 1976 to December 1978 have been carried out in two brackish lakes: Lake Etang de Berre and Lake Etang de Vaine located in the French Mediterranean coast, in the region of Carry-le-Rouet located on the north-west Mediterranean near Marseilles, and in fresh water inflows from 4 Rivers (Touloubre, Durance, Arc, Durancole) to Lake Etang de Berre. Physico-chemical parameters were measured for this study: water temperature, salinity, density, pH, alcalinity, dissolved oxygen (% saturation), phosphate, nitrate, nitrite, silicate etc. Diverse biological parameters were also studied: photosynthetic pigments, phaeopigments, specific composition and biomass of phytoplankton, primary pelagic production etc. Climatical factors were studied: air-temperature, solar-radiation, evaporation, direction (including strength) of winds, precipitation and freshwater volume of the four rivers. The changes in Lake ‘Etang de Berre’ ecosystem depend on the quality of the water in the Durance River, and on the effects of seawater near the entrance of the Caronte Canal. The water quality of the lake varies horizontally and vertically as a result of atmospheric phenomena, maritime currents and tides. The distribution of water temperatures is generally heterogeneous. Southeasterly winds and the Northeasterly Mistral wind are important in the origins of circulated and mixed water masses. These winds are both frequent and strong. They have, as a result, a great effect on the water environment of Lake Etang de Berre. In theory, the annual precipitation in this region is well over eight times the water mass of the lake. The water of the Durance River flows into Lake Etang de Berre through the EDF Canal, amounting to 90% of the precipitation. However, reduction of rainfall in dry seasons has a serious effect on the hydrological characteristics of the lake. The temperature in the winter is partially caused by the low temperature of fresh water, particularly that of the Durance River. The hydrological season of fresh and brackish water is about one month ahead of the hydrological season of sea water in its vicinity. The salinity of Lake Etang de Berre runs approximately 3$\textperthousand$, except at lower levels and near the entrance to the Caronte Canal. However, when the volume of the Durance River water is reduced in the summer and fall, the salinity rises to 15$\textperthousand$. In the lake, the ratio of fresh water to sea water is six to one (6:1). The large quantities of seston conveyed by rivers, particularly the Durance diversion, strongly reduce the transparency in the brackish waters. Although the amount of sunshine is also notable, transparency is slight because of the large amount of seston, carried chiefly by Tripton in the fresh water of the Durance River. Therefore, photosynthesis generally occurs only in the surface layer. The transparency progressively increases from freshwater to open seawater, as mineral particles sink to the bottom (about 1.7kg $m^{-2}a^{-1}$ on the average in brackish lakes). The concentration of dissolved oxygen and the rate of oxygen saturation in seawater (Carry-le-Rouet) ranged from 5.0 to 6.0 $m\ell$ㆍ.$1^{-1}$, and from 95 to 105%, respectively. The amount of dissolved oxygen in Etang de Berre oscillated between 2.9 and 268.3%. The monographs of phosphate, nitrate, nitrite and silicate were published as a part of a study on the ecology of phytoplankton in these environments. Horizontal and vertical distributions of these nutriments were studied in detail. The recent diversion of the Durance River into Lake Etang de Berre has effected a fundamental change in this formerly marine environment, which has had a great impact in its plankton populations. A total of 182 taxa were identified, including 111 Bacillariophyceae, 44 Chlorophyceae, and 15 Cyanophyceae. The most abundant species are small freshwater algae, mainly Chlorophyceae. The average density is about $10^{8}$ cells $1^{-1}$ in Lake Etang de Berre, and about double that amount in Lake Etang de Vaine. Differences in phytoplankton abundance and composition at the various stations or at various depths are slight. Cell biovolume V (equivalent to true biomass), plasma volume VP (‘useful’ biomass) and, simultaneously. the cell surface area S and S/V ratio through the measurement of cell dimensions were computed as the parameters of phytoplankton productivity and metabolism. Pigment concentrations are generally very high on account of phytoplankton blooms by Cyanophyceae, Chlorophyceae and Cryptophyceae. On the other hand, in freshwaters and marine waters, pigment concentrations are comparatively low and stable, showing slight annual variation. The variations of ATP concentration were closely related to those of chlorophyll a and phytoplankton blooms only in marine waters. The carbon uptake rates ranged between 38 and 1091 mg$Cm^{-2}d^{-1}$, with an average surface value of 256 mg; water-column carbon-uptake rates ranged between 240 and 2310 mg$Cm^{-2}d^{-1}$, with an average of 810, representing 290 mg$Cm^{-2}$, per year 45 000 tons per year of photosynthetized carbon for the whole lake. Gross photosynthetic production measured by the method of Ryther was studied over a 2-year period. The values obtained from marine water(Carry-le-Rouet) ranged from 23 to 2 337 mg$Cm^{-2}d^{-1}$, with a weighted average of 319, representing about 110 gCm$^{-2}$ per year. The values in brakish water (Etang de Berre) ranged from 14 to 1778 mg$Cm^{-2}d^{-1}$, with a weighted average of 682, representing 250 mg$Cm^{-2}$ per year and 38 400 tons per year of photosynthesized carbon for the whole lake.

공간정보와 생육모의에 의한 남한 벼 품종의 북한 서부지대 적응성 예측 (Using Spatial Data and Crop Growth Modeling to Predict Performance of South Korean Rice Varieties Grown in Western Coastal Plains in North Korea)

  • 김영호;김희동;한상욱;최재연;구자민;정유란;김재영;윤진일
    • 한국농림기상학회지
    • /
    • 제4권4호
    • /
    • pp.224-236
    • /
    • 2002
  • 남한 벼 품종의 북한서부평야지 재배적응성 예측을 위하여 496개 단위 재배구역 각각에 대하여 30년간의 생육모의를 실시하였다. 5km $\times$ 5km로 구획된 1,044개 재배구역중 벼논 재배구역은 위성영상자료를 분석하여 추출하였다. 일최고ㆍ최저기온, 강우량, 강우일수, 일사량은 1981년부터 2000년 동안 남북한의 기상관측소의 측정간을 이용하여 1 km$\times$ 1 km 해상도로 작성하였고, 최소재배단위(CZU)의 벼논 픽셀에 해당하는 기후값만을 발췌하여 그들의 평균값을 각 CZU의 대표값으로 하였으며, 각 재배구역별 월평균값으로부터 30년간의 일기상 자료를 무작위로 생성하였다. 11개 주요 남한 벼품종에 해당하는 CERES-rice 모형에 필요한 생장 및 발육관련모수는 농업관련 국가기관에서 장기간동안 수행하여 축적된 조사자료로부터 추정하였다. 남한 주요 품종의 유전적 특성을 갖도록 모수가 조정된 생육모형 CERES-rice를 북한 서부평야지 496개 벼 재배단위별 무작위로 생성된 30년간의 일기상 자료를 이용하여 이앙기(적식, 만식), 관개(천수답, 수리안전답), 작부방식(일모작, 이모작) 등 3요인을 2수준으로 두어 품종별 총 8개씩의 처리로 년도별 기상변이에 따른 생육 및 수량 등을 모의하였다. 각 품종에 대하여 같은 모형을 남한의 3개 작물시험장 실제 기상자료에 근거한 생육모의를 수행함으로써 북한지방 모의결과의 상대평가를 위한 기준자료로 삼았다. 생육모의를 통한 분석결과 남한의 중생종 벼 품종들 가운데 수원에서의 출수기가 8월 15일 이전인 것들이 북한서부평야지에서 적응성이 높을 것으로 판단된다. 이 결과는 앞으로 있을 남ㆍ북한 농업기술교류시 남한 벼 품종의 북한 곡창지대인 서부평야지 적응성 판단의 중요한 기초자료가 될 것이다.

신재생에너지 부문의 경제적 파급효과 분석 (The Economic Effects of the New and Renewable Energies Sector)

  • 임슬예;박소연;유승훈
    • 에너지공학
    • /
    • 제23권4호
    • /
    • pp.31-40
    • /
    • 2014
  • 국제적인 온실가스 감축 논의에 대한 구체적인 대응방안의 하나로, 우리나라는 2035년까지 신재생에너지 보급률 11% 달성을 목표로 하는 제2차 에너지기본계획을 수립하였다. 국내 신재생에너지 부문은 8개 분야 재생에너지(태양열, 태양광발전, 바이오매스, 풍력, 소수력, 지열, 해양에너지, 폐기물에너지)와 3개 분야 신에너지(연료전지, 석탄액화가스화, 수소에너지) 등 총 11개 분야로 구성되어 있다. 신재생에너지 보급 확대를 위한 정부와 민간의 투자가 늘어나면서, 신재생에너지 부문의 경제적 파급효과를 규명할 필요성도 증가하고 있다. 이에 본 논문에서는 가장 최근에 발표된 2012년도 산업연관표를 이용한 산업연관분석을 적용하여 신재생에너지 부문의 경제적 파급효과를 분석하고자 한다. 먼저 수요유도형 모형을 이용하여 신재생에너지 부문의 생산유발효과, 부가가치 유발효과, 취업유발효과를 분석한다. 둘째, 공급유도형 모형을 활용하여 공급 지장효과를 살펴본다. 마지막으로 레온티에프 가격모형을 통해 물가파급효과를 도출한다. 분석결과는 다음과 같이 된다. 첫째, 신재생에너지 부문의 1원 생산 또는 투자는 2.1776원의 생산과 0.7080원의 부가가치를 유발한다. 아울러 신재생에너지 10억원 생산 또는 투자의 취업유발효과는 9.0337명이다. 둘째, 신재생에너지 부문의 1원 공급지장으로 인한 국민경제 전체적인 생산 차질액은 1.6314원으로 분석되어 그 값이 작지 않았다. 셋째, 신재생에너지 부문 산출물의 가격이 10% 오를 때의 국민경제 전체적인 물가파급효과는 0.0123%로 작은 편이다. 이상의 정량적 정보는 신재생에너지 부문의 생산 및 투자 확대의 경제적 파급효과를 사전적으로 예측하는 데 중요한 정보로 활용될 수 있다.

피부 섬유아세포에서 광자극의 효과 (The Effect of Photomodulation in Human Dermal Fibroblasts)

  • 김미나;곽택종;강내규;이상화;박선규;이천구
    • 대한화장품학회지
    • /
    • 제41권4호
    • /
    • pp.325-331
    • /
    • 2015
  • 피부는 낮 동안 태양빛과 인공 빛에 끊임없이 노출되어 있으며, 그중 5%는 UV 영역, 50%는 가시광선, 나머지 45%는 적외선 영역으로 구성되어 있다. 이중 자외선의 피부에 대한 영향은 많은 연구가 되어 왔으나, 나머지 영역에 대한 연구는 미진한 실정이다. 이에, 가시광선에서 적외선 사이의 파장이 피부 섬유아세포에 어떤 영향을 미치는지 연구하고자 하였다. 광처리에 의한 효과는 광파장, 처리 시간, 광세기, 광조합 등 다양한 파라미터들의 조합에 의해 그 효능이 결정되므로, 본 연구에서는 섬유아세포의 성장 및 콜라겐 합성과 관련된 기능을 촉진시킬 수 있는 광처리 조건을 찾아내고자 하였다. 가시광선과 적외선 영역 사이의 6개의 파장을 처리한 결과, 레드(630 nm)와 그린(520 nm) 파장에 의해 섬유아세포의 증식이 증가함을 확인하였다. 광처리 시간은 콜라겐 합성량 증가를 위해서는 10 min의 광처리가 30 min의 광처리 보다 적합한 조건이었다. 광세기는 $0.05{\sim}0.75mW/cm^2$에서 6개의 광세기로 분할하여 실험한 결과, 레드 $0.3mW/cm^2$와 그린파장 0.15, $0.3mW/cm^2$ 세기가 type I collagen의 mRNA의 양을 증가시킬 수 있었다. 마지막으로 두 개 파장을 순차적으로 조합 처리하였을 때의 효과를 확인한 결과, 레드와 그린파장의 조합 조건은 섬유아세포의 수적증가를 목적으로 할 때 효율적인 방법이며, 콜라겐 합성에는 레드 단독처리가 보다 효과적인 방법이었다. 따라서 본 연구에서 제시하는 광처리 조건을 이용시 피부 세포의 성장이나 콜라겐 합성에 긍정적 영향을 유도할 수 있으며, 재생 및 피부 미용 등에 활용할 수 있는 가능성이 클 것으로 기대된다.

해상풍력발전단지의 최적 위치 선정을 위한 Grid-cell 평가 시스템 개념 설계 (A Study on the Design of the Grid-Cell Assessment System for the Optimal Location of Offshore Wind Farms)

  • 이보경;조익순;김대해
    • 해양환경안전학회지
    • /
    • 제24권7호
    • /
    • pp.848-857
    • /
    • 2018
  • 최근 국제적으로 풍력, 태양광, 파도, 연료전지 등의 친환경 신재생에너지 개발이 활발하다. 특히, 해상에서의 풍력발전단지 개발은 대형화를 통한 단가 절감, 고품질의 풍력자원 활용, 발전기로 인한 소음 피해 최소화를 위해 해안에서 멀리 떨어진 위치에 대규모 부유식으로 건설되는 추세이다. 풍력발전단지의 개발은 해사안전법에 의한 해상교통안전진단제도에 따른 평가가 필요하다. 풍력발전단지의 평가는 해당 수역의 체계적인 개발, 관리, 활용을 위해 선과 면적 개념을 모두 적용하여 수행되어야 하며, 이를 위한 평가 방법과 기준이 개발되어야 한다. 이 연구에서는 해상풍력발전단지처럼 해양 공간을 평가할 수 있는 해상교통조사방법과 평가에 대한 적절한 기준을 수립하고, 이를 시스템적으로 처리할 수 있는 방안에 대해서 연구하였다. 먼저 해상교통조사를 위해 AIS와 레이더를 이용한 이동식 해상교통데이터 수집장치를 설계하였다. 그리고 선과 면적의 개념을 모두 적용한 해상교통 항적도, 밀집도, 경로 분석을 제안하였다. 해상교통밀집도는 Grid-cell의 크기를 조절하여 단위 cell에 대한 공간적, 시간적 점유율을 구분하고 해상교통 경로 분석은 해상을 통항로 또는 작업 공간으로 사용할 때를 구분하여 선박의 이동 패턴을 평가할 수 있도록 제안하였다. 최종적으로 시스템적인 해상교통데이터의 수집과 평가가 가능한 해상교통안전평가솔루션의 개념설계를 수행하였다. 이는 자동적인 해상교통데이터의 수집 저장 분류를 통해, 데이터 누락이나 오표기와 같은 인적 오류를 최소화하고 해상 공간의 용도에 따라 선과 면적 개념을 반영하여 분석함으로써 신뢰성 있는 해상 공간의 평가가 가능하게 한다.

전기 방사 공정의 제조 변수를 이용한 TiO2 나노섬유의 직경 제어 (The control of TiO2 nanofiber diameters using fabrication variables in electrospinning method)

  • 윤한솔;김보성;김완태;나경한;이정우;양완희;박동철;최원열
    • 한국결정성장학회지
    • /
    • 제31권1호
    • /
    • pp.8-15
    • /
    • 2021
  • TiO2는 물리적, 화학적 안정성이 높고, 신체에 무해하여 태양전지, 치과용 임플란트 및 광촉매 같은 다양한 분야에서 사용되어 왔다. 비표면적이 큰 TiO2 나노섬유는 생체 친화성 제품에서 좋은 반응성과 공기 및 수질 정화시 우수한 광촉매 특성을 보여주었다. TiO2 나노섬유를 제조하기 위해 전기방사법을 사용하였으며, 제조 변수에 따른 직경 변화를 관찰하기 위해 precursor 성분 변수와 공정 변수로 구분하여 미세구조 변화를 분석하였다. Precursor 성분 변수로는 PVP(Polyvinylpyrrolidone) 및 TTIP(Titanium(IV) isopropoxide)의 농도를 선택하였고, 공정 변수로는 주입 속도와 인가 전압을 선택하였다. TiO2 나노섬유의 미세구조와 결정구조는 FE-SEM(Field emission scanning electron microscope)와 XRD(X-ray diffraction)을 이용하여 분석하였다. 450℃에서 3시간 열처리 공정을 통해, 평균 직경 약 0.27 ㎛에서 1.31 ㎛를 갖는 asspun TiO2 나노섬유가 0.22 ㎛에서부터 0.78 ㎛의 평균 직경을 갖는 anatase 상의 TiO2 나노섬유로 상전이 됨을 확인할 수 있었다. 평균 직경 0.22 ㎛의 anatase TiO2 나노섬유는 비 표면적 증대에 의한 광촉매 특성 향상을 기대할 수 있다. 또한 TiO2 나노섬유의 직경 변화를 위해서는 주입 속도 및 인가 전압과 같은 공정 변수보다는 PVP 농도 및 TTIP 농도와 같은 precursor 성분 변수를 제어하는 것이 더욱 효과적이었다.