• 천문학회보
• /
• 제45권1호
• /
• pp.69.2-69.2
• /
• 2020

Korea Astronomy and Space Science Institute (KASI) is developing a coronagraph to measure the coronal electron density, temperature, and speed utilizing spectral change of the K-corona around 400 nm. However, near UV light is more affected by atmospheric effect on the ground than visible light. For the total solar eclipse on July 2 2019, KASI organized an expedition team to test the possibility of the similar measurement scheme in the visible light. The observation site was in Las Flores, San Juan, Argentina. We built an imaging spectrograph using micro lenslet array and grism, named Coronal Integral Field Spectrograph (CorIFS). In addition, images of white light corona, wide field background, and all sky were taken with various camera settings. We present the preliminary results of the expedition.

• Journal of Electrical Engineering and Technology
• /
• 제10권5호
• /
• pp.2070-2076
• /
• 2015

Nano composite materials were multi-constituent combinations of nano dimensional phases with distinct differences in structure, chemistry and properties. Nano particles were less likely to create large stress concentrations and thereby can avoid the compromise of the material ductility while improve other mechanical properties. Corona discharge was an electrical discharge. The ionization of a fluid surrounding a conductor was electrically energized. This discharge would occur when the strength of the electric field around the conductor was high enough to form a conductive region, but not high enough to cause electrical breakdown or arcing to nearby objects. This paper shows all the studies done on the preparation of nano fillers. Special attention has given to the ACSR transmission line conductor, TiO₂ nano fillers and also to the evaluation of corona resistance on dielectric materials discussed in detail. The measurement of the dielectric properties of the nano fillers and the parameters influencing them were also discussed in the paper. Corona discharge test reveals that in 0%N ACSR sample corona loss was directly proportional to the applied line voltage. No significant change in corona loss between 0%N and 1%N. When TiO₂ nano filler concentration was increased up to 10%N fine decrement in corona loss was found when compared to base ACSR conductor, corona loss was decreased by 40.67% in 10%N ACSR sample. It was also found from the surface conditions test that inorganic TiO₂ nano filler increases the key parameters like tensile strength and erosion depth.

• 한국위성정보통신학회논문지
• /
• 제6권2호
• /
• pp.102-106
• /
• 2011

태양폭발, 코로나물질방출(Corona Mass Ejection, CME)등의 태양활동을 포함한 우주환경(space environment)은 결코 인간에게 우호적이지만은 않다. 특히 인공위성에게는 치명적일 수 있다. 그 중에서 정지궤도에 있는 통신위성에게는 상기와 같은 급격한 태양활동뿐만 아니라 지속적으로 끊임없이 배출되는 전자, 양성자등 플라즈마 입자들로 인해 수명이 단축되고 있다. 통신위성을 구성하는 능동부품들은 플라즈마 입자들에 특히 약하기 때문이다. 이를 방지하기 위하여 방사능 차폐(Radiation Shielind)등을 하지만 이에 대한 비용이 매우 많이 드는 것이 사실이다. 그러므로 적절한 차폐가 필요하며 이를 위해서는 우주환경의 연구가 필요하다. 본 연구에서는 저궤도부터 우주탐사용 위성까지 모든 궤도영역의 인공위성의 이상현상등을 분석한 후 이것이 태양폭발, 지자기 폭풍등 우주환경이벤트와의 연관성을 조사해보고자 한다.

• 천문학회보
• /
• 제44권1호
• /
• pp.50.2-50.2
• /
• 2019

Understanding three-dimensional structure and parameters (e.g., radial velocity, angular width, source location and density) of coronal mass ejections (CMEs) is essential for space weather forecast. In this study, we determine CME mean density in solar corona and near the Earth. We select 38 halo CMEs, which have the corresponding interplanetary CMEs (ICMEs), by SOHO/LASCO from 2000 to 2014. To estimate a CME volume, we assume that a CME structure is a full ice-cream cone which is a symmetrical circular cone combined with a hemisphere. We derive CME mean density as a function of radial height, which are approximately fitted to power-law functions. The average of power-law indexes is about 2.1 in the LASCO C3 field of view. We also obtain power-law functions for both CME mean density at 21 solar radii and ICME mean density at 1AU, with the average power-law index of 2.6. We estimate a ratio of CME density to background density based on the Leblanc et al.(1998) at 21 solar radii. Interestingly, the average of the ratios is 4.0, which is the same as a default value used in the WSA-ENLIL model.

• 천문학회지
• /
• 제53권4호
• /
• pp.87-98
• /
• 2020

The Korea Astronomy and Space Science Institute (KASI) has been developing a next-generation coronagraph (NGC) in cooperation with NASA to measure the coronal electron density, temperature, and speed simultaneously, using four different optical filters around 400 nm. KASI organized an expedition to demonstrate the coronagraph measurement scheme and the instrumental technology during the 2017 total solar eclipse (TSE) across the USA. The observation site was in Jackson Hole, Wyoming, USA. We built an eclipse observation system, the Diagnostic Coronal Experiment (DICE), composed of two identical telescopes to improve the signal-to-noise ratio. The observation was conducted at four wavelengths and three linear polarization directions in the limited total eclipse time of about 140 seconds. We successfully obtained polarization data for the corona but we were not able to obtain information on the coronal electron temperature and speed due to the low signal-to-noise ratio of the optical system and strong emission from prominences located at the western limb. In this study, we report the development of DICE and the observation results from the eclipse expedition. TSE observation and analysis with our self-developed instrument showed that a coronagraph needs to be designed carefully to achieve its scientific purpose. We gained valuable experience for future follow-up NASA-KASI joint missions: the Balloon-borne Investigation of the Temperature and Speed of Electrons in the Corona (BITSE) and the COronal Diagnostic EXperiment (CODEX).

• 천문학회보
• /
• 제46권1호
• /
• pp.60.1-60.1
• /
• 2021

The Balloon-borne Investigation of Temperature and Speed of Electrons in the corona (BITSE) is a technology demonstration mission launched in 2019 to observe the solar corona from ~3 Rs to 15 Rs at four wavelengths (393.5, 405.0, 398.7, and 423.4 nm). Preliminary analysis shows that BITSE imaged the solar minimum corona with the equatorial streamers on the east and west limbs. The narrow streamers observed by BITSE are in good agreement with the geometric properties obtained by the Solar and Heliospheric Observatory (SOHO) coronagraphs in the overlapping physical domain. In spite of the small signal-to-noise ratio we were able to obtain the temperature and flow speed of the western steamer. In the heliocentric distance range 4 - 7 Rs on the western streamer, we obtained a temperature of ~ 1.0 ± 0.3 MK and a flow speed of ~ 260 km s^-1 with a large uncertainty interval.

• 천문학회지
• /
• 제36권spc1호
• /
• pp.135-143
• /
• 2003

Solar radio astronomy is about to undergo a revolution with the advent of a new radio synthesis array, the Frequency Agile Solar Radiotelescope (FASR). The array will consist of more than 100 antennas (5000 baselines), and will be designed to meet the special challenges of solar imaging. It will produce high-quality images at hundreds of frequencies in the range 20 MHz-24 GHz. We briefly describe the plans for the instrument, and then concentrate on the range of science that is expected to be addressed, using current state-of-the-art solar radio observations and modeling to illustrate FASR performance. We end with an assessment of the current status of the instrument, and plans for future.

• 천문학회지
• /
• 제36권spc1호
• /
• pp.37-44
• /
• 2003

In this paper, we review recent studies on the magnetic helicity changes of solar active regions by photospheric horizontal motions. Recently, Chae(200l) developed a methodology to determine the magnetic helicity change rate via photospheric horizontal motions. We have applied this methodology to four cases: (1) NOAA AR 8100 which has a series of homologous X-ray flares, (2) three active regions which have four eruptive major X-ray flares, (3) NOAA AR 9236 which has three eruptive X-class flares, and (4) NOAA AR 8668 in which a large filament was under formation. As a result, we have found several interesting results. First, the rate of magnetic helicity injection strongly depends on an active region and its evolution. Its mean rate ranges from 4 to $17 {\times} 10^{40}\;Mx^2\;h^{-1}$. Especially when the homologous flares occurred and when the filament was formed, significant rates of magnetic helicity were continuously deposited in the corona via photospheric shear flows. Second, there is a strong positive correlation between the magnetic helicity accumulated during the flaring time interval of the homologous flares in AR 8100 and the GOES X-ray flux integrated over the flaring time. This indicates that the occurrence of a series of homologous flares is physically related to the accumulation of magnetic helicity in the corona by photospheric shearing motions. Third, impulsive helicity variations took place near the flaring times of some strong flares. These impulsive variations whose time scales are less than one hour are attributed to localized velocity kernels around the polarity inversion line. Fourth, considering the filament eruption associated with an X1.8 flare started about 10 minutes before the impulsive variation of the helicity change rate, we suggest that the impulsive helicity variation is not a cause of the eruptive solar flare but its result. Finally, we discuss the physical implications on these results and our future plans.

• 천문학회지
• /
• 제52권4호
• /
• pp.89-97
• /
• 2019

We demonstrate the subsurface origin of the observed evolution of the solar active region 10930 (AR10930) associated with merging and breakup of magnetic polarity regions at the solar surface. We performed a magnetohydrodynamic simulation of an emerging magnetic flux tube whose field-line twist is asymmetrically distributed along its axis, which is a key to merging and fragmentation in this active region. While emerging into the surface, the flux tube is subjected to partial splitting of its weakly twisted portion, forming separate polarity regions at the solar surface. As emergence proceeds, these separate polarity regions start to merge and then break up, while in the corona sigmoidal structures form and a solar eruption occurs. We discuss what physical processes could be involved in the characteristic evolution of an active region magnetic field that leads to the formation of a sunspot surrounded by satellite polarity regions.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2010년도 한국우주과학회보 제19권1호
• /
• pp.38.3-39
• /
• 2010

While major solar proton events (SPEs) come from the coronal mass eject (CME)-driven shocks in solar wind, there are many evidences that potentiality of CMEs to generate SPEs depends on its early evolution near the Sun and on different solar activities observed around the CME liftoff time. To decipher origin of SPE release, we have investigated onset time comparison of the SPE with CME, metric type II radio burst, and hard X-ray flare. For this, we select 30 SPEs observed from 1997 to 2006 by using the particle instrument ERNE onboard SOHO, which allows proton flux anisotropy measurement in the energy range ~10 - 50MeV. Onset time of the SPEs is inferred by considering the energy-dependent proton transport time. As results, we found that (1) SPE onset time is comparable to that of type II but later than type III onset time and HXR start time, (2) SPE onset time is mostly later than the peak time of HXR flare, (3) almost half of the SPE onsets occurred after the HXR emission, and (4) there are two groups of CME height at the onset time of SPE; one is the height below 5 Rs (low corona) and the other is above 5Rs (high corona). In this talk, we will present the onset time comparison and discuss about the origin of the SPE onset.