• 폴리머
• /
• 제28권4호
• /
• pp.344-351
• /
• 2004

온도에 반응하는 고분자로서 폴리(에틸렌 글리콜)을 기본으로 다이블록 및 트리블록 폴리에스테르 공중합체들은 비독성과 생체적합성 그러고 생분해성 특징 때문에 주사제형의 약물전달체로서 많은 응용이 이루어지고 있다. 본 연구에서는 다이블록 공중합체를 이용한 새로운 솔-젤 전이 현상을 갖는 고분자를 준비하고자, 평균분자량 750g/mole의 메톡시 폴리(에틸렌 글리콜)과 카프로락톤을 실온에서 HCI $.$ Et$_2$O 존재 하에서 개환중합을 실시하였다. 합성된 고분자는 시차주사열량계와 X-선 회절기를 이용하여 특성을 분석하였고, 수용액상에서의 고분자 용액은 실온에서 신체온도로 온도를 상승시키면 졸에서 겔 상으로의 상변화를 보였다. 신체온도 부근에서의 겔 형성을 확인하기 위하여 20 W% 졸 상태의 고분자용액을 쥐의 피하에 주입한 결과 분산 없이 겔이 잘 형성되었고 2개월 간 겔이 유지됨을 확인하였다. 이러한 연구 결과로, 새로운 솔-젤 상전이 현상을 보이는 다이블록 공중합체를 합성하였고, 주사형 이식 재료로의 가능성을 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• 제27권12호
• /
• pp.1981-1984
• /
• 2006

Novel amphiphilic, thermo-responsive polyaspartamides which showed both LCST (lower critical solution temperature), and sol-gel transition were prepared and characterized. The polyaspartamide derivatives were synthesized from polysuccinimide, the polycondensate of aspartic acid monomer, via successive nucleophilic ring-opening reaction by using dodecylamine and N-isopropylethylenediamine (NIPEDA). At the intermediate composition ranges, the dilute aqueous solution exhibited a thermally responsive phase separation due to the presence of LCST. The phase transition temperature was controllable by changing the content of pendent groups. In addition, a physical gelation, i.e. the sol-gel transition was observed from the concentrated solutions, which was elucidated by dynamic viscoelastic measurements. These novel injectable and thermo-responsive hydrogels have potential for various biomedical applications such as tissue engineering and current drug delivery system.

• 한국결정성장학회지
• /
• 제5권4호
• /
• pp.332-342
• /
• 1995

실리콘 알콕사이드 용액의 졸-겔 전이에 있어서 반응조건에 중요한 영향을 미치는 인자에 대하여 Raman 분광분석을 기초로 해서 고찰해 보았다. 촉매의 종류, 용매, 건조제어용 화학첨가제 및 물의 양과 같은 여러 가지 인자가 졸-겔 과정에 있어 전이메카니즘에 영향을 주었다.

• 한국군사과학기술학회지
• /
• 제8권4호
• /
• pp.85-90
• /
• 2005

We report the phase transition temperatures of the $PbZrO_3$ perovskite nanotubes made by sol-gel template synthesis. The lead zirconate($PbZrO{_3}$) nanotubes were prepared with a chelate sol-gel of zirconium tetrabutoxide($Zr(OBu){_4}$) and leadacetate($Pb(OAc){_2}-3H_2O$). $Whatman^(r)$ anodisc membranes, with a 200nm pore size, served as the template. After removing the template in the 6M-NaOH solution, the $PbZrO{_3}$ nanotubes so far have shown an anomalous transition temperature, $123.6^{\circ}C$ as measured by DSC with a small particle size, 15.4nm determined by X-ray analysis with the aid of Scherrer's equation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.232-233
• /
• 2006

In recent years the interest in organic/inorganic hybrid materials has increased at a fast rate. Nano organic-inorganic hybrid composites have shown advantages for preparing hard coating layers. Especially, nano hybrid composite has low environmental pollution. It has high transparency, hardness, toughness, thermal dissociation temperature, hydrophobicity by using nano sized inorganic material. There are many ways in which these materials may be synthesized, a typical one being the use of silica and silanes using the sol-gel process. The structure of sol-gel silica evolves as a result of these successive hydrolysis and condensation reactions and the subsequent drying and curing. The sol-gel reactions are catalyzed by acids and produce silica sol solutions. The silica sol grows until they reach a size where a gel transition occurs and a solid-like gel is formed. Colloidal silica(CS)/silane sol solutions were synthesized in variation with parameters such as different acidity and reaction time. In order to understand their physical and chemical properties, sol-gel coating films were fabricated on glass. From all sol-gel solutions, seasoning effect of sol-gel coating layer on glass was observed.

• 한국세라믹학회지
• /
• 제35권1호
• /
• pp.11-16
• /
• 1998

$VO_2$ thin films have been prepared on borosilicate glass substrate using alkoxide method to characterize the effects of fabricating factors on thermochromic performance. The gel films formed by spin coating were converted to $V_2O_5$ phase during oxidizing heat-tratment and the $VO_2$ phase were formed by reducing heat-treatement. The thermochromic switching properties of $VO_2$ thin films are strongly affected by the crystal phase and microstructure and those could be controlled by reducing heat-treatment conditions. The ther-mochromic switching characteristics of $VO_2$ thin films synthesized were measured at IR (2.5$\mu\textrm{m}$) as the transition temperature of $63^{\circ}C$ the transition width of $3.6^{\circ}C$and the maximum and minimum transmittance of 84% and 14% respectively.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제11권4호
• /
• pp.277-281
• /
• 2006

Spherical micro silica sol-gel immobilized enzyme beads were prepared in an emulsion system using cyclohexanone and Triton-X 114. The beads were used for the in situ immobilization of transaminase, trypsin, and lipase. Immobilization during the sol to gel phase transition was investigated to determine the effect of the emulsifying solvents, surfactants, and mixing process on the formation of spherical micro sol-gel enzyme beads and their catalytic activity. The different combinations of sol-gel precursors affected both activity and the stability of the enzymes, which suggests that each enzyme has a unique preference for the silica gel matrix dependent upon the characteristics of the precursors. The resulting enzyme-entrapped micronsized beads were characterized and utilized for several enzyme reaction cycles. These results indicated improved stability compared to the conventional crushed form silica sol-gel immobilized enzyme systems.

• 센서학회지
• /
• 제21권4호
• /
• pp.311-317
• /
• 2012

Disposable amperometric screen-printed biosensor strips have been fabricated by a sol-gel encapsulation for the analysis of glucose. The glucose oxidase(GOx) is entrapped in the gel matrix through sol-gel transition of tetraethoxysliane(TEOS). The biosensor is fabricated by GOx containing thin film of TEOS gel on the surface of screen-printed carbon electrode(SPCE). The GOx-containing thin film of TEOS gel offers a one-step modification process on the surface of SPCE. The optimum conditions for glucose determination have been characterized with respect to the applied potential, enzyme loading ratio, and pH. The linear range and detection limit of glucose detection were from 2.0 mM to 16.0 mM and 0.25 mM, respectively.

• 한국세라믹학회지
• /
• 제29권5호
• /
• pp.335-340
• /
• 1992

Undoped PbTiO3 ceramics was successfully prepared by using sol-gel process, which had not been fabricated due to its microcracks created by anisotropic stress during phase transition from cubic to tetragonal phase. Fabrication of undoped PbTiO3 ceramics via sol-gel processing was very much affected by the PbO content of the samples as well as PbO vapor from sintering atmosphere. Excess PbO was found to promote rapid grain growth in PbTiO3 ceramics. After sintering at 1100$^{\circ}C$ average grain size of PbTiO3 ceramics with excess PbO was about 8 times greater than that of stoichiometric composition, which may be due to PbO liquid phase from excess PbO.

• 한국세라믹학회지
• /
• 제29권3호
• /
• pp.211-215
• /
• 1992

Crack free PbTiO3 ceramics were produced by sol-gel processing using alkoxide, which has not been reported to be successful. The PbTiO3 gels were prepared from Ti alkoxide and lead acetate without any dopants. They were calcined at $600^{\circ}C$ and miled to produce fine PbTiO3 powder. It was pressed into discs and they were sintered at 110$0^{\circ}C$ for a few hours. The sintered ceramics were relativley hard and dense as having about 96% of theoretical density of PbTiO3. Fabrication of pure PbTiO3 ceramics by sol-gel processing is possibly due to their small grain size and uniform distribution of residual stress created during cubic-tetragonal transition over large number of small grains in fine grain PbTiO3 ceramics.