• Title/Summary/Keyword: soil transfer

Search Result 620, Processing Time 0.024 seconds

Design of Pile Foundations Considering Negative Skin Friction (부마찰력을 고려한 말뚝기초 설계)

  • Kim Ju-Hyong;Kwon Oh-Sung;Kim Myoug-Mo
    • Journal of the Korean Geotechnical Society
    • /
    • v.21 no.5
    • /
    • pp.65-74
    • /
    • 2005
  • The negative skin friction on piles, which are installed in currently consolidating soft deposits, creates significant problems on the stability of pile foundations. This study investigated whether or not the pile foundation designs were appropriate in soft deposits with large amount of consolidation settlement. The final settlements of the grounds along the pile depth were estimated by the soil parameters obtained from the laboratory tests and by the field-measured settlement curves, if they were available. The displacement of the piles along the pile depth was estimated by both the load transfer method and the numerical method. Both methods gave similar locations of neutral planes and magnitudes of the maximum axial forces on the piles. The movements of the ground and the piles were compared to calculate the down drag acting on piles. For the piles whose bearing capacities were less than the design loads including the down drag, slip layer coatings and/or incrementing of the pile penetration depth into the bearing stratum were proposed to improve the pile capacities.

Numerical Analysis of Thermal Effect on Axial Load and Pile Settlements in PHC Energy Piles (PHC 에너지파일의 열응력에 따른 축하중-침하 수치해석)

  • Lee, Dae-Soo;Min, Hye-Sun;Lim, Hyun-Sung;Jeong, Sang-Seom
    • Journal of the Korean Geotechnical Society
    • /
    • v.29 no.5
    • /
    • pp.5-17
    • /
    • 2013
  • This study investigates the effect of thermal stress on axial load and pile settlement of PHC energy piles. A series of numerical analyses were performed by controlling major influencing parameters such as pile arrangement, pile spacing, end-bearing condition, soil condition and pile cap stiffness. It is found that the characteristics of pile-load transfer are significantly affected by seasonal operation mode (i.e., cooling and heating) throughout the year. Also, the axial load under thermal loading increases with increasing the pile spacing. The settlement of the pile in sand is larger than that in clay because of the thermal stress generated. It is also found that thermal stress highly influences on the end-bearing pile, corner pile and rigidity of pile cap.

Prediction of Heat Exchange Rate in PHC Energy Piles (PHC 에너지 파일의 열교환율 예측에 관한 연구)

  • Yoon, Seok;Lee, Seung-Rae;Park, Hyun-Ku;Park, Do-Won;Go, Gyu-Hyun
    • Journal of the Korean Geotechnical Society
    • /
    • v.29 no.9
    • /
    • pp.31-41
    • /
    • 2013
  • The use of energy pile foundation has increased for economic utilization of geothermal energy. In particular, coil-shaped ground heat exchanger (GHE) is preferred to the conventional U-shaped exchanger to ensure better efficiency of heat exchange rate. This paper presents a numerical and experimental study on the heat transfer behavior of PHC energy piles. Field thermal performance tests (TPTs) were conducted for the PHC energy piles installed in a partially saturated weathered granite soil deposit, in which two types of GHEs were considered: W and coil shaped GHEs. Besides, three-dimensional finite element analyses were also conducted, and the results were compared with the experimental results. According to the results of TPT and numerical analyses, the coil shaped GHE showed 10~15% higher heat exchange rate than the W type GHE in the PHC energy piles.

Study on the Development of High-speed Rotary Tilling System for Power Tiller (경운기의 고속 로터리 경운시스템 개발에 관한 연구)

  • 이승규;김성태;우종구;김재영
    • Journal of Biosystems Engineering
    • /
    • v.26 no.5
    • /
    • pp.423-430
    • /
    • 2001
  • The purpose of this study is to develop high-speed rotary tillage system for a power tiller by improving the rotary blade and the power train of transmission. Mechanical structure of gear train of rotary drive of conventional power tiller was simplified so that power can be transmitted directly from second shaft to tilling speed change shaft by rotating freely the transfer gear which changes the direction of rotation of shafts using needle bearing installed into middle shaft. A new gear train suitable for the single-edged rotary blade and high-speed rotary drive was developed with the rotational speed of rotary shaft faster than 7.5% at 1st-speed and 1.4% at 2nd-speed the one of conventional system by changing the numbers of teeth of gears of middle shaft, tilling speed change shaft and PTO shaft. Using the developed gear train for high-speed rotary drive, field tests were performed to compare tillage performances by the developed single-edged blade and by the conventional double-edged blade. The results showed that the performances by the single-edged blade compared with the one by the double-edged blade was improved about 18% in field capacity, about 34% in fuel consumption, and 9.4% in soil crushing ratio. Therefore, it may be concluded that tillage performance by the single-edged blade was improved compared to the one by the conventional blade. Evaluation of the developed system consisting of single-edged blade and gear train for high-speed rotary drive in field revealed that tillage performance of the developed system was similar to the one of field test conducted using the system consisting of single-edged blade and gear train for rotary drive of conventional power tiller However, considering the higher cone index of the upland field where evaluation was carried out compare to the one of the ordinary paddy field, it may be concluded that tillage performance of the developed rotary tilling system better than the one of conventional system.

  • PDF

Genetic Transformation and Plant Regeneration of Codonopsis lanceolata Using Agrobacterium (Agrobacterium에 의한 더덕의 형질전환과 식물체 재분화)

  • 최필선;김윤성;유장렬;소웅영
    • Korean Journal of Plant Tissue Culture
    • /
    • v.21 no.5
    • /
    • pp.315-318
    • /
    • 1994
  • To obtain transformed plants, we cocultured cotyledonary explants of Codonopsis lanceolata with Agrobacterium tumefaciens LBA4404, a disamed strain harboring a binary vector pBI121 carrying the CaMV35S promoter-$\beta$-glucuronidase (GUS) gene fusion used as a reporter gene and NOS promoter-neomycin phosphotransferase gene as a positive selection marker in MS liquid medium with 1mg/L BA. After 48 h of culture, explants were transferred onto MS solid medium with Img/L BA, 250mg/L carbenicillin, and 100mg/L kanamycin sulfate and cultured in the dark. Numerous adventitious buds formed on the cut edges of the explants after 2 weeks of culture. When subjected to GUS histochemical assay buds showed a positive response at a frequency of 15%. Explants formed adventitious shoot at a frequency of 56.7%, after 6 weeks of culture. Upon transfer onto the basal medium, most of the shoots were rooted and subsequently the regenerants were transplanted to potting soil. Southern blot analysis confirmed that the GUS gene was incorporated into the genomic DNA of the GUS-positive regenerants.

  • PDF

Somatic Embryogenesis and Plant Regeneration in Mature Seed Cultures and Seed-Derived Embryogenic Suspension Cultures of Yuzu (유자의 성숙종자 배양 및 종자유래 배발생 현탁배양으로부터 체세포배발생을 통한 유자의 식물체 재생)

  • Min, Sung-Ran;Choi, Myung-Suk;Jeong, Won-Joong;Liu, Jang-Ryol
    • Journal of Plant Biotechnology
    • /
    • v.29 no.3
    • /
    • pp.185-188
    • /
    • 2002
  • Off-white, friable embryogenic calluses were formed on the internal integument of mature seeds of yuzu (Citrus junos) cultured on Murashige and Skoog's basal medium at a frequency of 1.2%. Embryogenic calluses were proliferated when cultured on medium with 1 mg/L 2,4-D. Upon transfer to medium with 0.1 mg/L kinetin, embryogenic calluses produced numerous somatic embryos. Embryogenic suspension cultures were established by placing embryogenic calluses into liquid medium with 1 mg/L 2,4-D. When plated onto medium with 0.5 mg/L ABA, embryogenic cells developed into somatic embryos at a high frequency, and then regenerated into plantlets. Plantlets were successfully transplanted to potting soil and grown in a greenhouse.

Somatic embryogenesis and in vitro plant regeneration in moth bean [Vigna aconitifolia (Jacq.) Marechal]: a recalcitrant grain legume

  • Choudhary, Kailash;Singh, M.;Rathore, M.S.;Shekhawat, N.S.
    • Plant Biotechnology Reports
    • /
    • v.3 no.3
    • /
    • pp.205-211
    • /
    • 2009
  • An efficient in vitro regeneration protocol for moth bean [Vigna aconitifolia (Jacq.) Marechal] via somatic embryogenesis has been developed. Embryogenic callus cultures were established from the cotyledonary node as explant on semi-solid Murashige and Skoog (MS) medium supplemented with $0.75mg\;1^{-1}$ 2,4-dichlorophenoxyacetic acid (2,4-D) and $1.5mg\;1^{-1}$ 6-benzylaminopurine (BA) and with various additives ($50mg\;1^{-1}$ ascorbic acid and $25mg\;1^{-1}$ each of adenine sulphate, citric acid and $_L-arginine$). Numerous somatic embryos differentiated on MS basal nutrient medium supplemented with $0.25mg\;1^{-1}$ 2,4-D and $0.5mg\;1^{-1}$ of kinetin (Kin). Sustained cell division resulted in the formation of cell aggregates, which progressed to the globular- and heart-shaped somatic embryos and then, if they differentiated properly, to the torpedo shape and cotyledonary stages. The transfer of embryos onto fresh MS basal medium containing $0.2mg\;1^{-1}$ BA and $2.0mg\;1^{-1}$ gibberellic acid enabled the embryos to achieve complete maturation and germination. More than 80% of somatic embryos were converted into true-to-type fertile plants. In vitro-regenerated plantlets with well-developed roots were successfully hardened in a greenhouse and established in soil.

Nitrate Contents in Vegetables Cultivated by Organic Farming in Korea (우리나라 유기농 채소내 질산염 함량의 경시적 추이)

  • Sohn, Sang-Mok;Kim, Young-Ho;Yoon, Ji-Young
    • Korean Journal of Organic Agriculture
    • /
    • v.7 no.2
    • /
    • pp.125-151
    • /
    • 1999
  • After the release of facts that the high nitrate contents in vegetables by Korean organic farming, organic farmers were recommended by Korean Organic Farmer Association to apply 20t/ha compost while they applied before as much as they could, sometimes even more than 100t/ha. This study was aimed to check the safety of Korean organic product in terms of nitrate content. Current nitrate content in leaf and root vegetables by 3 different farming systems(organic farming, conventional farming, greenhouse farming) were monitored and furthermore it was compared with previously published another data in Korea to find out any changes among the monitored years(1993-1999). Current nitrate content in chinese cabbage, lettuce and kale became less compare to those of the beginning of monitoring, and especially those cultivated organic farming got the lowest value while previous organic vegetables at beginning of 90's showed the higher value than those cultivated in greenhouse. This decrease in organic vegetables was affected by less application rate of organic fertilizer than before at 20t/ha. But the nitrate level by organic farming was still higher compare to those cultivated by conventional farming in open field, since currently monitored organic vegetables were cultivated basically in greenhouse condition. It shows the organic farmer the necessity of transfer their farming site and condition from greenhouse to open field in order to decrease of its high level of nitrate caused long-term application and slow release characteristics of organic fertilizer. It was concluded the adoption of soil nitrate test to recommend a organic farmer the exact application rate for need of crop growth. Additionally the mechanism of lower nitrate accumulation in rice and fruit vegetables were also discussed in the paper.

  • PDF

Numerical Discussion on Natural Convection in Soils (지반내 자연대류에 대한 수치해석적 논의)

  • Shin, Hosung
    • Journal of the Korean Geotechnical Society
    • /
    • v.33 no.2
    • /
    • pp.35-47
    • /
    • 2017
  • Thermal behavior of soils is mainly focused on thermal conduction, and the study of natural convection is very limited. Increase of soil temperature causes natural convection due to buoyancy from density change of pore water. The limitations of the analysis using fluid dynamics for natural convection in the porous media is discussed and a new numerical analysis is presented for natural convection in porous media using THM governing equations fully coupled in the macroscopic view. Numerical experiments for thermal probe show increase in the uncertainty of thermal conductivity estimated without considering natural convection, and suggest appropriate experimental procedures to minimize errors between analytical model and numerical results. Burial of submarine power cable should not exceed the temperature changes of $2^{\circ}C$ at the depth of 0.2 m under the seabed, but numerical analysis for high permeable ground exceeds this criterion. Temperature and THM properties of the seafloor are important design factors for the burial of power cable, and in this case effects of natural convection should be considered. Especially, in the presence of heat sources in soils with high permeability, natural convection due to the variation of density of pore water should be considered as an important heat transfer mechanism.

Mapping of Areal Evapotranspiration by Remote Sensing and GIS Techniques (RS/GIS수법을 이용한 廣域蒸發散量의 추정)

  • 安忠鉉
    • Korean Journal of Remote Sensing
    • /
    • v.11 no.1
    • /
    • pp.65-80
    • /
    • 1995
  • Remote Sensing data with ancillary ground-based meteorological data provides the capalility of computing threeof the four surface energy balance components(i.e. net radiation, soil heat flux and sensible heat flux) at different spatial and temporal scales. As a result, this enablis the estimation of the remaining term, latent heat flux. One of the practical applications with this approach is to produce evapotranspiration maps over large areas. This results could estimate and reproduce areal evapotranspiration over large area as much as several hundred sequare kilometers. Moreover, some calculating simulations for the effects of the land use change on the surface heat flux has been made by this method, which is able to estimate evapotranspiration under arbitracy presumed condition. From the simulation of land use change, the results suggests that the land use change in study area can be produce the significant changes in surface heat flux. This preliminary research suggests that the future research should involve development of methods to account for the variability of meteorological parameters brought about by changes in surface conditions and improvements in the modeling of sensible heat transfer across the surface atmosphere interface for partical canopy conditions using remote sensing information.