Design of Pile Foundations Considering Negative Skin Friction

부마찰력을 고려한 말뚝기초 설계

  • Kim Ju-Hyong (Korea Institute of Construction Technology) ;
  • Kwon Oh-Sung (Technology Research Institute, Daelim Industrial Co., Ltd) ;
  • Kim Myoug-Mo (Dept. of Civil, Urban and Geosystem Engng, Seoul National Univ)
  • Published : 2005.07.01

Abstract

The negative skin friction on piles, which are installed in currently consolidating soft deposits, creates significant problems on the stability of pile foundations. This study investigated whether or not the pile foundation designs were appropriate in soft deposits with large amount of consolidation settlement. The final settlements of the grounds along the pile depth were estimated by the soil parameters obtained from the laboratory tests and by the field-measured settlement curves, if they were available. The displacement of the piles along the pile depth was estimated by both the load transfer method and the numerical method. Both methods gave similar locations of neutral planes and magnitudes of the maximum axial forces on the piles. The movements of the ground and the piles were compared to calculate the down drag acting on piles. For the piles whose bearing capacities were less than the design loads including the down drag, slip layer coatings and/or incrementing of the pile penetration depth into the bearing stratum were proposed to improve the pile capacities.

압밀이 진행 중인 지반에 설치되는 말뚝은 부마찰력을 받으며 과도한 부마찰력은 기초 및 상부구조물의 안정에 심각한 영향을 미칠 수 있다. 본 연구에서는 큰 잔류침하가 예상되는 연약지반에 교각 기초로 시공되는 말뚝의 부마찰력을 산정하여 기초의 지지력에 대한 안정성을 평가하였다. 본 연구에서는 연약 점성토 내에 설치될 말뚝기초가 큰압밀침하가 발생하는 지역에 적합한지 여부를 판단하였는데, 이를 위해 시기별 지반조사 자료로부터 얻은 대상지반의 압밀정수와 침하 계측자료를 이용하여 현재의 압밀도와 잔류침하량을 산정하였다. 말뚝의 깊이별 침하량은 부마찰력을 고려할 수 있도록 수정된 하중전이함수법과 수치해석적 방법의 두 가지 방법으로 예측하였는데, 두 방법으로 구한 깊이별 말뚝변위와 최대 축하중은 서로 유사한 값을 나타내었으며, 중립면의 위치도 유사하게 나타났다. 부마찰력을 고려하여 말뚝의 지지력에 대한 안전성 평가를 수행한 결과 말뚝이 설계지지력에 못미치 경우에는 slip layer코팅을 적용하여 부마찰력을 감소시키거나 말뚝의 지지층 근입깊이를 늘려 지지력을 증가시키는 방안을 추천하였다.

Keywords

References

  1. 대한토목학회 (2001), 도로교설계기준 해설(하부구조편), pp.245-252
  2. Barron, R. A. (1948), 'Consolidation of fine-grained soils by drain wells', Transaction, ASCE, Vol.113, pp.718-754
  3. Coyle, H. H. & Reese, L. C. (1966), 'Load transfer for axially loaded piles in clay, J.S.M.F.D., ASCE, Vol.93, SM6, pp.261-278
  4. Cundall, P. A. (1976), 'Explicit finite difference methods in geomechanics', In Numerical Method in Engineering, Proceedings of the EF Conference on Numerical Methods in Geomechanics, Blacsburg, V.A, Desai, C.S. (ed.), Vol.1, pp.132-150
  5. Kwon, Oh Sung, Kim, Jung Hwan, Jeon, Kyong Soo, Kim, Myoung Mo (1999), Numerical predictions of the load-displacement curves of rock socketed concrete piles, Journal of the Korean Geotechnical Society., Vol.15, No.3
  6. Mindlin, R. D. (1936), 'Force at a point in the interior of a semi-infinite solid', Physics 7, p.195
  7. Vesic, A. S. (1977), Design of pile foundations, N.C.H.R.P. Synthesis of Highway Practice 42, pp.22-26