• 한국토양비료학회지
• /
• 제47권6호
• /
• pp.594-597
• /
• 2014

Crop yields depend on the limiting factor of crop growth; Liebig law of minimum. Identifying the kind and the necessary amount of the limiting factor is essential to increase crop yield. Although nitrogen is the most essential nutrient, N application does not always bring about yield increases when other elements are limiting in rice cultivation. Two experiments were compared to elucidate the effect of soil testing on rice yield response to N level. The one was an experiment about yield response of 3 rice cultivars to 7 levels of N application, which was conducted from 2003 to 2004 in 25 farmer's fields without ameliorating soil conditions by soil testing and the other was a demonstration experiment on N fertilizer recommendation equation by 0, 0.5, 1.0, and 1.5 times of N recommended level in 5 soil types from 30 fields after ameliorating soil conditions by soil testing. The N response patterns of the experiments conducted without soil testing showed a Mitscherlich pattern in some cultivars and soil types, but did not in the others. The N response patterns of the demonstration experiment showed a Mitscherlich pattern in all soil types. Because these results indicated that N was the minimum nutrient in the demonstration experiment by ameliorating soil conditions with soil testing, but not in the other experiment without soil testing, the supply of minimum nutrients by soil testing could increase the efficiency of N-fertilization.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.362-369
• /
• 2005

Studying unsaturated soil mechanics, determination of soil water characteristic curve and permeability equation is an essential factor but it is not easy. In this research a new testing apparatus was developed to determine soil water characteristic curve and permeability equation. The testing to get saturated permeability coefficients and soil water characteristic curves for two soils was performed by using the developed testing apparatus. First, a saturated permeability testing was performed and then the testing to get soil water characteristic curve of a drying process was performed. Next, the testing to get soil water characteristic curve of a wetting process was performed. Testing results showed hysteresis phenomena between soil water characteristic curve of a drying process and soil water characteristic curve of a wetting process. The permeability equations were determined by a theoretical method where a saturated permeability coefficient and a soil water characteristic curve were used.

• 한국도로학회논문집
• /
• 제20권4호
• /
• pp.21-26
• /
• 2018

PURPOSES : The objective of this study is to evaluate the application of soil stabilization method for soft shoulder construction in the iRoad Project of Sri Lanka. METHODS : Firstly, the quantitative analysis of soil strength improvement due to soil stabilization was done for soil samples collected from iRoad construction sites. Two types of soils were selected from iRoad Project sites and prepared for soil stabilization testing by the Road Development Authority. Secondly, the appropriate stabilizer was selected at given soil type based on test results. Two different stabilizers, ST-1 and ST-2, produced in Korea were used for estimating soil strength improvements. Finally, the optimum stabilizer content was determined for improving shoulder performance. The uniaxial compressive strength (UCS) test was conducted to evaluate the strength of stabilized soil samples in accordance with ASTM D 1633. The use of bottom ash as a stabilizer produced from power plant in Sri Lanka was also reviewed in this task. RESULTS : It is found from the UCS testing that a 3% use of soil stabilizer can improve the strength up to 2~5 times in stabilized soft shoulder soils with respect to unstabilized soils. It is also observed from UCS testing that the ST-1 shows high strength improvement in 3% of stabilizer content but the strength improvement rate with increase of stabilizer content is relatively low compared with ST-2. The ST-2 shows a low UCS value at 3% of content but the UCS values increase significantly with increase of stabilizer content. When using the ST-2 as stabilizing agent, the 5% is recommended as minimum content based on UCS testing results. Based on the testing results for bottom ash replacement, the stabilized sample with bottom ash shows the low strength value. CONCLUSIONS : This paper is intended to check the feasibility for use the soil stabilization technique for shoulder construction in Sri Lanka. The use of soil stabilizer enables to improve the durability and strength in soft shoulder materials. When applying the bottom ash as a soil stabilizer, various testings should be conducted to satisfy the specification criteria.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제19권3호
• /
• pp.134-141
• /
• 2014

A testing inspection is one of the important in the industry, owing to determine the reliability and directivity of testing inspection results. Therefore, the quality assurance and quality control (QA/QC) work which performed by personnel not directly in the inventory compilation development, in testing inspection must be thoroughly considered. Some agencies for environmental test inspection, they sometimes misunderstood that the QA/QC was ended with proficiency testing performance and on-site assessment by a director. Thus, results were often calculated without QA/QC work by self manual when conducting test. The objective of this study was to improve reliability of testing and inspection agency through the QA/QC case study which basically performed to raising reliability of testing and inspection agency. In this study, it increased reliability of result by verifying calibration curve (IC, ICV, CCV), blank, accuracy (LCS, MS) and precision as QA/QC performance, while performing investigation of soil contamination in mining areas. This study suggests that reliability establishing method of test result and management method of analysis process, through the QA/QC instance of testing agency.

• 한국환경농학회지
• /
• 제25권1호
• /
• pp.71-76
• /
• 2006

Environment friendly agriculture is nowadays a major fiend to sustain balanced agricultural ecosystem, keeping its productivity. This study was conducted to determine the optimum levels of nitrogen (N) application for improving rice productivity and reducing N loss through N application based on soil diagnosis. four levels of N were applied with 0, 50, 100 and 150% of recommended levels by soil testing in 4 different paddy soils (i.e. normal, sandy, ill-drained and immature soils). Across N treatments, the greatest grain yield was observed in sandy soil and the lowest in ill-drained soil. The grain yield tended to decrease with increasing N application from 50% to 150% of recommended levels, except ill-drained soil. To ensure maximum yield the optimum levels of N application were estimated at 120 kg, 153 kg and 173 kg $ha^{-1}$ in normal, immature and sandy soil, respectively.

• Geomechanics and Engineering
• /
• 제37권5호
• /
• pp.499-510
• /
• 2024

In northern China, abundant summer rainfall and a higher water table can weaken the soil due to salt heave, collapsibility, and increased moisture absorption, thus the chlorine saline soil (silty clay) needs to be stabilized prior to use in road embankments. To optimize chlorine saline soil stabilizing programs, unconfined compressive strength tests were conducted on soil treated with five different stabilizers before and after soaking, followed by field compaction test and unconfined compressive strength test on a trial road embankment. In situ testing were performed with the stabilized soils in an expressway embankment, and the results demonstrated that the stabilized soil with lime and SH agent (an organic stabilizer composed of modified polyvinyl alcohol and water) is suitable for road embankments. The appropriate addition ratio of stabilized soil is 10% lime and 0.9% SH agent. SH agent wrapped soil particles, filled soil pores, and generated a silk-like web to improve the moisture stability, strength, and stress-strain performance of stabilized soil.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.184-191
• /
• 2010

This paper proposes the shaking table testing method for replicating the dynamic behavior of soil-structure interaction (SSI) system, without any physical soil model and only using superstructure model. Applying original SSI system to the substructure method produces two substructures; superstructure and soil model corresponding to experimental and numerical substructures, respectively. Interaction force acting on interface between the two substructures is observed from measuring the accelerations of superstructure, and the interface acceleration or velocity, which is the needed motion for replicating the dynamic behavior of original SSI system, is calculated from the numerical substructure reflecting the dynamic soil stiffness of soil model. Superstructure is excited by the shaking table with the motion of interface acceleration or velocity. Analyzing experimental results in time and frequency domains show the applicability the proposed methodologies to the shaking table test considering dynamic soil-structure interaction.

• Smart Structures and Systems
• /
• 제23권1호
• /
• pp.81-90
• /
• 2019

The shear behavior of soil-concrete interface is mainly affected by the surface roughness of the two contact surfaces. The present research emphasizes on investigating the effect of roughness of soil-concrete interface on the interface shear behavior in two-layered laboratory testing samples. In these specially prepared samples, clay silt layer with density of $2027kg/m^3$ was selected to be in contact a concrete layer for simplifying the laboratory testing. The particle size testing and direct shear tests are performed to determine the appropriate particles sizes and their shear strength properties such as cohesion and friction angle. Then, the surface undulations in form of teeth are provided on the surfaces of both concrete and soil layers in different testing carried out on these mixed specimens. The soil-concrete samples are prepared in form of cubes of 10*10*30 cm. in dimension. The undulations (inter-surface roughness) are provided in form of one tooth or two teeth having angles $15^{\circ}$ and $30^{\circ}$, respectively. Several direct shear tests were carried out under four different normal loads of 80, 150, 300 and 500 KPa with a constant displacement rate of 0.02 mm/min. These testing results show that the shear failure mechanism is affected by the tooth number, the roughness angle and the applied normal stress on the sample. The teeth are sheared from the base under low normal load while the oblique cracks may lead to a failure under a higher normal load. As the number of teeth increase the shear strength of the sample also increases. When the tooth roughness angle increases a wider portion of the tooth base will be failed which means the shear strength of the sample is increased.

• 비파괴검사학회지
• /
• 제30권6호
• /
• pp.539-547
• /
• 2010

In this study, characteristics of the fundamental longitudinal guided wave mode, L(0,1), which is a usual mode employed in the inspection of the above-ground pipe, of the buried pipe were numerically investigated considering property changes in the surrounding soil. Results showed that soil conditions are significantly affecting the attenuation of L(0,1) mode in the pipe embedded in soil. Especially, if the soil is partially saturated, the attenuation of L(0,1) mode is larger and is very similar regardless of the degree of water saturation in the surrounding soil. However, when the soil is fully saturated, the attenuation of L(0,1) mode is less and show different trend with its partially saturated counterparts.

• 한국지반공학회논문집
• /
• 제19권4호
• /
• pp.145-153
• /
• 2003

공진주 실험은 탄성파 이론을 이용하여 흙의 동적 물성, 즉 전단변형률의 크기에 따른 전단탄성계수와 재료감쇠비를 측정하는 실험이다. 공진주 실험에 의한 시료의 동적물성의 측정은 공진주 실험 시스템의 동적 거동에 대한 이해를 전제로 한다. 공진주 실험의 시료 및 실험장치의 구성은 고정단-자유단 경계조건을 가지고 있는 연속보로 단순화할 수 있어서, Richart, Hall and Woods는 공진주 실험 시스템에 대한 파동방정식을 유도하였으나, 시료를 단순히 탄성으로 가정하였고 시료의 점성을 고려하지는 않았다. 그리고, Hardin은 파동방정식의 유도에서 시료의 점탄성을 고려하였으나, 시료의 전단탄성계수를 결정하기 위하여 시료의 점탄성을 가정하여야 하는 문제점을 가지고 있었다. 본 연구에서는 기존의 연구자들이 시도했던 공진주 실험 시스템에 대한 파동방정식을 새로운 측면에서 유도하였으며, 새로이 유도된 파동방정식의 해법을 제안하였다. 한편, 일반적으로 시스템에 대한 동적 거동을 이해하는 방법으로, 시스템의 운동방정식을 이용하는 방법이 있으나, 공진주 실험 시스템에 대한 동적 거동의 해석방법으로 이와 같은 운동방정식을 이용하는 해석방법을 연구한 경우는 거의 없었다. 운동방정식에 의한 해법은 시스템의 동적 증폭계수와 동적 응답에 대한 위상각을 구할수 있기 때문에 파동방정식에 대한 해법보다 더 많은 정보를 활용할 수 있는 장점이 있다. 따라서, 본 연구에서는 공진주 실험 시스템에 대한 보다 기본적이고 많은 정보를 도출하기 위하여, 공진주 실험 시스템에 대한 운동방정식을 유도하였으며, 이를 이용하여 공진주 실험자료를 해석하는 새로운 해석기법의 제안을 위한 근간을 마련하였다. 그리고, 공진주 실험 시스템에 대한 유한요소 해석을 수행하여, 본 연구에서 제안한 공진주 실험시스템의 이론적 모델링의 타당성과 합리성을 검증하였다.