• 한국지하수토양환경학회지:지하수토양환경
• /
• 제21권6호
• /
• pp.179-191
• /
• 2016

In addition to the measurement of the concentration of soil contaminants, the new idea of indicative parameters was proposed to validate the remedial works through the monitoring for the changes of soil characteristics after applying the clean up technologies. The parameters like CFU (colony forming unit), pH and soil texture were recommended as indicative parameters for land farming. In case of soil washing, water content and the particle size distribution of the sludge were recommended as indicative parameters. The sludge is produced through the particle separation process in soil washing and it is usually treated as a waste. The parameters like water content, organic matter content, CEC (cation exchange capacity) and CFU were recommended as indicative parameters for the low temperature thermal desorption method. Besides the indicative parameter, sampling methods in stock pile and the optimal minimum amount of composite soil sample were proposed. The rates of sampling error in regular grid, zigzag, four bearing, random grid methods were 17.3%, 17.6%, 17.2% and 16.5% respectively. The random grid method showed the minimum sampling error among the 4 kinds of sampling methods although the differences in sampling errors were very little. Therefore the random grid method was recommended as an appropriate sampling method in stock pile. It was not possible to propose a value of optimal minimum amount of composite soil sample based on the real analytical data due to the dynamic variation of $CV_{fund{\cdot}error}$. Instead of this, 355 g of soil was recommended for the optimal minimum amount of composite soil sample under the assumption of ISO 10381-8.

• 아시안잔디학회지
• /
• 제16권1호
• /
• pp.11-18
• /
• 2002

실제 골프장 토양환경에서 비료종류에 따른 계절별.토심별 토양 pH 변화를 규명하고자 안양 베네스트 골프클럽 내 들잔디 '중지'(Zoysta japonica Steud.)로 조성된 포장에서 산도 교정용으로 많이 이용하는 규산질비료(SiO$_2$) 및 석회석(CaCO$_3$) 2종류를 사용하여 규산질 비료 3수준, 석회석 비료 3수준으로 처리하여 실험한 결과 토층별로 현저한 차이가 관찰되었는데 전체 pH 평균을 보면 0~5cm의 표토가 6.54, 5~10cm가 5.80, 10~15cm의 심토에서는 5.04로 나타났다. 비료종류별 처리효과는 3개의 모든 층에서 1% 유의수준에서 고도의 유의성이 있는 것으로 나타났다. 표토인 0~5cm층에서 규산질 비료는 모두 유의한 증가를 보이지 않은 반면 석회질 비료구가 50kg/10a, 100kg/10a에서 유의적으로 증가하였으나 10~15cm 층에서는 규산질 비료 시비구가 100kg/10a, 200kg/10a에서 효과가 있었으나 석회질 비료는 유의한 증가가 인정되지 않았다. 그러나 5~10cm 층에서는 두 가지 비종 모두 유의한 증가를 나타내어 토심에 따른 차이가 있음을 알 수 있었다. 그리고 계절에 따른 경시적 토양산도 차이가 인정되고 이는 토심별로 차이가 인정되므로 토양 샘플 채취시 샘플시기를 고려해야 함을 알 수 있었다. 특히 표토(0~5cm)층의 토양산도가 지하층인(5~10cm, 10~15cm)에서보다 높은 것은 토양산도가 규소나 석회 같은 비료 함량에 의해서만 결정되는 것이 아니고 토양 모암의 상태나 유기물 함량, 강수량 등의 수분 함량, 온도, 토양의 통기성이나 호흡 등H$^{+}$ 이온농도에 영향을 미치는 제반여건이 영향을 미치는 것으로 이를 종합적으로 활용하여 토양산도를 조정해야 함을 알 수 있다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제20권7호
• /
• pp.53-60
• /
• 2015

This study suggested the new site classification system according to land use, type of contamination and contaminants. Because the present site classification system can not cover all the areas, we changed the concept of land use to more detail one and enlarged the concept of other areas to cover all the areas not defined as certain land use. In case of the present industrial area, it was merged as other areas to avoid the confusion with oil and toxic material storage tank farm area. Accident area was separated from other areas and defined as only accident area caused by the mobile storage facility. In addition to classify the sites according to the basic land use, we classify the sites again in lower level according to the type of contamination and contaminants. With this classification system, we proposed different soil sampling strategy with the consideration of the origin of contamination and the interactions between soil and contaminants. We removed the surface soil sample (0~15 cm depth) around above storage tank because it was not a effective sample to assess whether that area contaminated or not. We also proposed to take the deeper soil samples at minimum three sampling points to confirm the depth of contamination in exploratory soil survey. We also proposed to remove the one point of 15 m depth sampling because it is not effective to confirm contaminated soil depth and needs the exhausted labor and cost. Instead of doing this, we added the continuous sampling to uncontaminated subsoil. Soil sampling points and depth in detailed soil survey is determined based on the results of exploratory soil survey. Therefore, effectiveness and reinforcements of exploratory soil survey would play an important role in improving the reliability of detailed soil survey.

• 한국지반환경공학회 논문집
• /
• 제23권7호
• /
• pp.11-20
• /
• 2022

행성 지표에서 시추와 시료 샘플 채취는 행성의 지반 정보를 밝히는데 매우 중요한 역할을 담당한다. 행성 시추장비는 탐사용 착륙선이나 로버에 탑재되어 사용된다. 우주 탐사에서 광범위한 응용 가능성 때문에 전 세계의 과학자들은 다양한 기능의 시추장비의 설계 및 개발에 관심을 보이고 있다. 그러나 우주라는 극한 상황에서 완전한 기능을 갖춘 시추장비를 제작하는 것은 어려운 일이다. 본 논문에서는 지금까지 우주 행성의 극한환경에서 시추를 포함한 시료 채취에 관한 설계 및 제작, 샘플링 방법, 지상검증 등 포괄적인 지반조사 기술 개발 과정과 고려사항에 대해 소개하고자 한다.

• Environmental Analysis Health and Toxicology
• /
• 제24권3호
• /
• pp.251-259
• /
• 2009

This study was conducted to measure the concentration of PCBs in pine needles and soil in urban (Seoul, many artificial sources of PCBs), semi-rural (Anseong, small town located below Seoul in wind direction) and rural areas (Jincheon, rarely artificial sources of PCBs) in which the artificial production amount of PCBs are different. The total PCBs concentrations in pine needles, which did not show big difference in three sampling sites, were 107.5 pg/g (urban), 94.8 pg/g (semi-rural) and 78.8 pg/g (rural) respectively. The low chlorinated PCBs were major component in pine needles and the PCBs congener concentration profile of each sampling area were similar each other, and the octanol-air partitioning coefficient, Koa, highly correlated with the PCBs concentrations in pine needles. The total PCBs concentrations in soil which did show big difference in three sampling sites, were 830.0 pg/g (urban), 314.1 pg/g (semi-rural) and 136.5 pg/g (rural) respectively. The high chlorinated PCBs were major component in soil and the PCBs congener concentration profile of each sampling area were similar each other. There was no similarity between the PCBs concentration of pine needles and those of soil at each site, because of the different mechanism of deposition and volatilization processes of PCBs. The total PCBs concentrations of 2009 became 12.9 times lower than those of 2001. The reduce rate of PCB 28 was the greatest.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2000년도 창립총회 및 춘계학술발표회
• /
• pp.116-119
• /
• 2000

There has been a steady increase in geoenvironmental engineering projects where geotechnical engineering has been combined with environmental concerns. Many of these projects involve some investigation on contaminant and leachate flume in the ground and landfill. In this study, investigation and assesment on soil and groundwater around the waste landfill was carried out. Many techniques such as drilling and sampling method were applied. As a result of this study, the concentration of soil and groundwater were investigated and analysed.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2003년도 총회 및 춘계학술발표회
• /
• pp.115-119
• /
• 2003

Pollutants from industry, mining, agriculture, and other sources have contaminated sediments in many surface water bodies. Sediment contamination poses a severe threat to human health and environment because many toxic contaminants that are barely detectable in the water body can accumulate in sediment at much higher levels, the purpose of this study was to make convenient sampling method and optimal treatment of sediment for water quality improvement in reservoir or stream based on an evaluation of degree of contamination. Results for analysis of S-reservoir sediments were observed that copper concentration of almost areas were higher than the regulation of soil pollution (50 mg/1) for the riverbed. S-stream sediments were observed that copper, arsenic and TPH concentration of almost areas were exceeded soil pollution concerning levels for factorial areas. We used Remscreen(version. 1.0) program which is contaminated soil recovery program to select optimal treatment method of contaminant sediments. The result was shown in the order of Thermal Calcination > Excavation, Retrieval and Off-site Disposal(comparative less then contaminant) > Low Temperature Thermal Desorption + Solidification/Stabilization.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제22권6호
• /
• pp.57-65
• /
• 2017

Six soil subsampling methods were evaluated with explosive compounds-contaminated soils to quantify the variance associated with each method. The methods include modified grab sampling, simplified ripple splitting, fractional shoveling, coning & quatering, degenerate fractional shoveling, and rolling & quatering. All the methods resulted in significantly lower CV (coefficient of variation) of 1~5%, compared to common grab sampling that gave 8~98% of CV, possibly due to the reduction of grouping and segregation errors described by Gy sampling theory. Among the methods, simplified ripple splitting tends to result in lower explosive compounds concentrations, while the rolling & quatering gave the opposite result. Fractional shoveling method showed the least variance and the highest reproducibility in the analysis.

• 한국환경보건학회지
• /
• 제36권5호
• /
• pp.383-390
• /
• 2010

Exposure to fugitive dust can contribute to several respiratory health problems, and proper sampling of fugitive dust is necessary to assess exposure. However, field sampling of soil dust encounters problems from spatial and temporal differences in soil properties, field operations, and meteorological conditions. To minimize these problems, we designed a dust generator that simulates dust generation from soil. The dust generator consisted of a rotating chamber where soil samples were loaded and tumbled, and a settling chamber, where airborne soil dust samples were collected. As standard operating conditions, we decided on 2 g soil mass, 10 min sampling time, and 20 rpm rotating speed, with a flow rate of 30 l/min, based on three common soil textures of loam, sandy loam and silt loam. To evaluate optimal operating conditions, we used mixtures of Joomoonjin silica sand and clay. Although the average $PM_{10}$ concentration of Joomoonjin silica sand was low, dust concentrations were increased by an increased content of clay. The dust concentrations were consistent across repeated experiments, and showed similar concentration profiles during the sampling time with mixtures of clay and sand (coefficient of variation was $13.6{\pm}w;7.1%$). The results demonstrated that these standard operating conditions were suitable for the dust generator, which can be used to investigate variations in soil properties that affect dust production and potential potency of fugitive dust exposure.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제19권5호
• /
• pp.18-25
• /
• 2014

Traditional investigation procedures of soil and groundwater contamination are followed by soil gas sampling, soil sampling, groundwater sampling, establishment of monitoring wells, and groundwater monitoring. It often takes several weeks to obtain the analysis reports, and sometimes, it needs supplemental sampling and analysis to delineate the polluted area. Laser induced fluorescence (LIF) system is designed for the detection of free-phase petroleum pollutants, and it is suitable for on-site real-time site investigation when coupling with a direct push testing tool. Petroleum products always contain polycyclic aromatic hydrocarbon (PAH) compounds possessing fluorescence characteristics that make them detectable through LIF detection. In this study, LIF spectroscopy of 5 major fuel products was conducted to establish the databank of LIF fluorescence characteristic spectra, including gasoline, diesel, jet fuel, marine fuel and low-sulfur fuel. Multivariate statistical tools were also applied to distinguish LIF fluorescence characteristic spectra among the mixtures of selected fuel products. This study successfully demonstrated the feasibility of identifying fuel species based on LIF characteristic fluorescence spectra, also LIF seemed to be uncovered its powerful ability of tracing underground petroleum leakages.