• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.2
• /
• pp.263-272
• /
• 2019

This study demonstrates the applicability of the FLO-2D for the influence analysis of the debris flow on expressway. To do this, the behavior of debris flow on the expressway was reproduced by applying the FLO-2D to actual generated debris flow. The study area is a part of the Deokyusan Service Area on the Daejon-Jinju Expressway, where traffic was blocked for 24 hours due to the debris flow in August 2005. Geographical analysis with GIS, hydrological analysis with HEC-HMS, and estimation of the amount of debris flow were carried out using field survey and soil property test data. Then, the optimum parameter combination of FLO-2D was selected through the parameter sensitivity analysis, and the behavior analysis of debris flow on expressway was applied. The comparison of the predictions with the observations shows the availability of FLO-2D for the behavior analysis of debris flow on the expressway.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.94-94
• /
• 2017

지속적인 수질의 모니터링과 관리가 어려운 개발도상국의 경우, 모델링을 통한 병원균의 예측이 중요하다. Soil and Water Assessment Tool (SWAT)은 유역 모델로 병원균의 거동을 모의하는데 널리 활용된다. 하지만 SWAT이 모의하는 in-stream 모듈의 경우, 소멸, 부유, 퇴적의 단계만을 고려하여 정확도가 부족하다. 따라서 본 연구는 기존 모듈에 hyporheic exchange와 생장 단계를 추가하여 모듈의 성능 개선 및 열대 산지 유역에서의 병원균의 거동을 모의하였다. 본 연구는 몬순 기후 및 산지 지형을 가진 라오스의 Houay Pano 유역을 대상으로 대장균 (Escheichia coli, E.coli)의 거동을 2011년부터 2013년까지 일 단위로 모의하였다. 기존의 SWAT 박테리아 모듈의 경우, 소멸 단계만을 가지고 보정하였을 때 모델은 대부분 0의 값을 가졌고, 부유 및 퇴적 단계가 추가 된 후에는 우기시 대부분의 모델값이 관측값의 95% 신뢰 구간에 포함되었으나 건기에는 농도가 여전히 낮게 모의됨을 확인 할 수 있다. 건기 시 낮게 모의된 농도를 증가시키기 위해, 온도에 따른 생장 단계를 추가하였으며, 이때 생장 속도는 설정된 최소-최대 생장 온도 사이에서 최대값을 가진다. 하지만 온도에 따른 생장은 열대 기후의 특성상 전 기간에 걸쳐 동시에 증가하여 건기에만 낮게 모의된 농도를 보완하는 데는 한계가 있었다. Hyporheic exchange는 강바닥에 임시로 저장된 박테리아의 양이 특정 유량에 의해서 수계로 유입되는 현상으로, 본 연구에서는 일정한 양의 hyporheic flow를 가정하여 모의하였다. 결과적으로 Hyporheic exchange를 통해 유입되는 적은 양의 E.coli는 기존에 타당하게 모의된 우기의 농도는 그대로 유지하되, 건기에 낮게 모의된 농도는 증가시켜 기존 SWAT 모듈의 한계점을 잘 보완한 것을 확인 하였다. 결론적으로, 기존의 SWAT 모델은 건기 시 낮은 농도의 E.coli를 모의하기에 한계를 보였으며, 전 기간에 걸쳐 높은 온도를 유지하는 열대 기후에서 생장 단계는 이러한 한계를 보완하기에 적합하지 않은 것으로 판단되었다. 그러나 적은 양이 전 기간에 걸쳐 동일하게 유입되는 hyporheic exchange의 경우, 건기에 낮게 모의된 농도를 증가시켜 기존의 한계를 보완할 수 있었다.

• Korean Journal of Agricultural Science
• /
• v.47 no.4
• /
• pp.963-978
• /
• 2020

Earthquakes can induce a large number of landslides and cause very serious property damage and human casualties. There are two issues in study on earthquake-induced landslides: (1) slope stability analysis under seismic loading and (2) debris flow run-out analysis. This study aims to review technical studies related to the development and application of earthquake-induced landslide models (seismic slope stability analysis). Moreover, a pilot application of a physics-based slope stability model to Mt. Umyeon, in Seoul, with several earthquake scenarios was conducted to test regional scale seismic landslide mapping. The earthquake-induced landslide simulation model can be categorized into 1) Pseudo-static model, 2) Newmark's dynamic displacement model and 3) stress-strain model. The Pseudo-static model is preferred for producing seismic landslide hazard maps because it is impossible to verify the dynamic model-based simulation results due to lack of earthquake-induced landslide inventory in Korea. Earthquake scenario-based simulation results show that given dry conditions, unstable slopes begin to occur in parts of upper areas due to the 50-year earthquake magnitude; most of the study area becomes unstable when the earthquake frequency is 200 years. On the other hand, when the soil is in a wet state due to heavy rainfall, many areas are unstable even if no earthquake occurs, and when rainfall and 50-year earthquakes occur simultaneously, most areas appear unstable, as in simulation results based on 100-year earthquakes in dry condition.

• Genomics & Informatics
• /
• v.18 no.3
• /
• pp.28.1-28.9
• /
• 2020

Streptomyces coelicolor is a gram-positive soil bacterium which is well known for the production of several antibiotics used in various biotechnological applications. But numerous proteins from its genome are considered hypothetical proteins. Therefore, the present study aimed to reveal the functions of a hypothetical protein from the genome of S. coelicolor. Several bioinformatics tools were employed to predict the structure and function of this protein. Sequence similarity was searched through the available bioinformatics databases to find out the homologous protein. The secondary and tertiary structure were predicted and further validated with quality assessment tools. Furthermore, the active site and the interacting proteins were also explored with the utilization of CASTp and STRING server. The hypothetical protein showed the important biological activity having with two functional domain including POD-like_MBL-fold and rhodanese homology domain. The functional annotation exposed that the selected hypothetical protein could show the hydrolase activity. Furthermore, protein-protein interactions of selected hypothetical protein revealed several functional partners those have the significant role for the bacterial survival. At last, the current study depicts that the annotated hypothetical protein is linked with hydrolase activity which might be of great interest to the further research in bacterial genetics.

• Earthquakes and Structures
• /
• v.21 no.5
• /
• pp.531-549
• /
• 2021

Analytical models were developed and seismic behaviors were analyzed for a three-story stone pagoda at the Cheollyongsa temple site, which was damaged by the Gyeongju earthquake of 2016. Both finite and discrete element modeling were used and the analysis results were compared to the actual earthquake damage. Vulnerable parts of stone pagoda structure were identified and their seismic behaviors via sliding, rocking, and risk analyses were verified. In finite and discrete element analyses, the 3F main body stone was displaced uniaxially by 60 and 80 mm, respectively, similar to the actual displacement of 90 mm resulting from the earthquake. Considering various input conditions such as uniaxial excitation and soil-structure interaction, as well as seismic components and the distance from the epicenter, both models yielded reasonable and applicable results. The Gyeongju earthquake exhibited extreme short-period characteristics; thus, short-period structures such as stone pagodas were seriously damaged. In addition, we found that sliding occurred in the upper parts because the vertical load was low, but rocking predominated in the lower parts because most structural members were slender. The third-floor main body and roof stones were particularly vulnerable because some damage occurred when the sliding and rocking limits were exceeded. Risk analysis revealed that the probability of collapse was minimal at 0.1 g, but exceeded 80% at above 0.3 g. The collapse risks at an earthquake peak ground acceleration of 0.154 g at the immediate occupancy, life safety, and collapse prevention levels were 90%, 52%, and 6% respectively. When the actual damage was compared with the risk analysis, the stone pagoda retained earthquake-resistant performance at the life safety level.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.4
• /
• pp.61-71
• /
• 2006

A numerical procedure is presented fur evaluating seismic liquefaction on sloping ground sites. The procedure uses a fully coupled dynamic effective stress analysis with a plastic constitutive model called UBCSAND. The model was first calibrated against laboratory element behavior. This involved cyclic simple shear tests performed on loose sand with and without initial static shear stress. The numerical procedure is then verified by predicting a centrifuge test with a slope performed on loose Fraser River sand. The predicted excess pore pressures, accelerations and displacements are compared with the measurements. The results are shown to be in good agreement. The shear stress reversal patterns depend on static and cyclic shear stress levels and are shown to play a key role in evaluating liquefaction response in sloping ground sites. The sand near the slope has low effective confining stress and dilates more. When no stress reversals occur, the sand behaves in a stiffer manner that curtails the accumulated downslope displacements. The numerical procedure using UBCSAND can serve as a guide for design of new soil structures or retrofit of existing ones.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.9
• /
• pp.93-100
• /
• 2009

A core procedure of the direct search method used in this study is optimizing a difference between objective function and real displacement and correcting unknown variables. Because the research procedure comes from back-analyzing of the unknown variable of each layer, back-analyzing results need an additional optimization to minimize interferential effects of unknown variables. Therefore, the direct search method Is used to obtain optimized solutions without a partial differentiation of an objective function. The object of this research is developing the back analysis technique for multi-unknown variables by modeling the soil including underground structure Into upper and lower layer. In order to minimize interferent errors, repeated back analysis is performed and applicability on the real tunnel is examined. Consequently, the multi-layer analysis model is more precise in describing the real behavior of underground structure. It shows the validity of back analysis far multi-layer model which is the understructure placed on multi-layer boundaries.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.4
• /
• pp.37-45
• /
• 2010

Salt cementation, a typical naturally-cemented phenomenon, may occur due to water evaporation under the change of climate. Capillary force may influence the distribution of cement in granular soils. This study addresses the effect of capillary force on salt cementation using five different techniques: cone penetration test, electrical conductivity measurement, photographic imaging technique, nondestructive imaging technique, and process monitoring by elastic wave. Glass beads modeling a particulate media was mixed with salt water and then dried in an oven to create the cementation condition. Experimental results show that salt cementation highly concentrates at the top of the small particle size specimens and at the middle or the bottom of the large particle specimens. The predicted capillary heights are similar to the locations of high salt concentration in the cemented specimens. Five suggested methods show that the behavior of salt-cemented granular media heavily depends on the capillary force.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.4
• /
• pp.469-476
• /
• 2023

Soil plasticity models for cyclic and dynamic loads are essential in non-linear numerical analysis of geotechnical structures. While a single yield surface model shows a linear behavior for cyclic loads, J₂-bounding surface plasticity model with zero elastic region can effectively simulate a nonlinearity of the ground response with the same material properties. The radius of the yield surface inside the boundary surface converged to 0 to make the elastic region disappear, and plastic hardening modulus and dilatancy define plastic strain increment. This paper presents the stress-strain incremental equation of the developed model, and derives plastic hardening modulus for the hyperbolic model. The comparative analyses of the triaxial compression test and the shallow foundation under the cyclic load can show stable numerical convergence, consistency with the theoretical solution, and hysteresis behavior. In addition, plastic hardening modulus for the modified hyperbolic function is presented, and a methodology to estimate model variables conforming 1D equivalent linear model is proposed for numerical modeling of the multi-dimensional behavior of the ground.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.26 no.3
• /
• pp.29-42
• /
• 2023

As the destruction of habitats due to recent development continues, there is also increasing interest in endangered species. Mankyua chejuense is a vulnerable species that is sensitive to changes in population and habitat, and it has recently been upgraded from Endangered Species II to Endangered Species I, requiring significant management efforts. So in this study, we analyzed the potential habitats of Mankyua chejuense using MaxEnt(Maximum Entropy) modeling. We developed three models: one that considered only environmental characteristics, one that considered artificial factors, and one that reflected the habitat of dominant tree species in the overstory. Based on previous studies, we incorporated environmental and human influence factors for the habitats of Mankyua chejuense into spatial information, and we also used the habitat distribution models of dominant tree species, including Ulmus parvifolia, Maclura tricuspidata, and Ligustrum obtusifolium, that have been previously identified as major overstory species of Mankyua chejuense. Our analysis revealed that rock exposure, elevation, slope, forest type, building density, and soil type were the main factors determining the potential habitat of Mankyua chejuense. Differences among the three models were observed in the edges of the habitats due to human influence factors, and results varied depending on the similarity of the habitats of Mankyua chejuense and the dominant tree species in the overstory. The potential habitats of Mankyua chejuense presented in this study include areas where the species could potentially inhabit in addition to existing habitats. Therefore, these results can be used for the conservation and management planning of Mankyua chejuense.