• Journal of the Mineralogical Society of Korea
• /
• v.31 no.3
• /
• pp.149-159
• /
• 2018

The Gyeongju Bunhwangsa Stone Brick Pagoda, which was built with bricks of andesite, is the oldest brick stone pagoda of Silla period. The damage patterns in the stone pagoda are pollutants such as white crust, black crust, discoloration, soil adsorption, and microorganisms, and repair materials. The damage pattern of structural factors in the Stone Brick Pagoda is a bulging phenomenon. According to the X-ray diffraction analysis, white crust are mainly consist of calcite ($CaCO_3$) and thermonatrite ($Na_2CO_3{\cdot}H_2O$) that evaporite finds in nature. Damage pattern varies depending on location of stone pagoda. The pollutants are first story body of pagoda. The microorganisms are confirmed at base, lion statues, first and second story capstone, and repair materials observed at base. The bulging phenomenon appeared on the first story body of the pagoda. Occupancy rates by damage type were higher in the order of microorganisms, pollutants, repair material, bulging phenomenon, and peeling. The highest percentage of individual damage patterns were black microorganisms (39.3%), followed by lichen (17.9%), discoloration (8.0%), white crust (5.5%), cement mortar (5.1%) and peeling (3.1%).

• Journal of Environmental Science International
• /
• v.21 no.10
• /
• pp.1221-1234
• /
• 2012

There are many factors to influence the amount of terpene at the forest. However, it is poorly understood whether the amount is altered by meteorological factors. In order to study correlation analysis between terpene amount and meteorological(i.e., temperature, humidity, wind speed, solar radiation) and environmental factors(i.e., oxygen, carbonb dioxide) at the artificial coniferous forest of Chamaecyparis obtusa (site 1) and Cryptomeria japonica (site 2) nearby the $1^{st}$ reservoir at Mt. Moodeung, the research was executed during April to November in 2011. Forest density at site 1 was 1,692 trees/ha, being occupied with 87.2% of Chamaecyparis obtusa, higher than 925 trees/ha at site 2. Carbon dioxide at site 1 was in the range of 385~410 ppm in June, similar to at Anmyundo(395 ppm in 2010). Solar radiation has positive correlation with ambient temperature and inversely negative with relative humidity. Main species of terpene released were ${\alpha}$-pinene, camphene, ${\beta}$-pinene, cymene, ${\delta}$-limonene and camphor at two sites and terpene was more effluent at spring and summer than at fall. The large amount of terpene was emitted in the afternoon than in the morning under the influence of the wind speed and the topographical property. The terpene amount has positive correlation with relative humidity and oxygen, and negative with wind speed and soil temperature. Because correlations of ${\alpha}$-pinene and other terpene materials showed statistically significant within p=0.01. ${\alpha}$-pinene could be suggested as the basic material in explaining the amount of other terpene materials.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.5
• /
• pp.39-52
• /
• 2013

The shear stress characteristics of landslide materials can be affected by various factors. We examined the shear stress characteristics of two different soils using ring-shear apparatus, in which saturation-consolidation-shearing speed can be easily controlled. This paper presents (i) shear stress-time characteristics, (ii) shear stress depending on normal stress and shear speed and (iii) shear stress as a function of shearing speed. Materials used in this paper were the Nakdong River sand and muds taken from Jinhae coastal area in Korea. Samples were prepared in three types: Sand (upper)-Sand (lower), Clay (upper)-Clay (lower) and Sand (upper)-Clay (lower). The upper and lower indicate the samples placed in upper and lower ring shear boxes, respectively. For given normal stresses (50 and 100 kPa) and shearing speed (0.1 mm/sec), we performed ring shear tests. Then the failure lines were determined in the second test. Last, we determined the shear stress characteristics depending on different shearing speeds, such as 0.01, 0.1, 1, 10, 100 mm/sec. As a result, we found that shear stress characteristics are strongly dependent on above three factors. The shear stress of Sand (upper)-Clay (lower) is smaller than that of Sand (upper)-Sand (lower), but slightly larger than that of Clay (upper)-Clay (lower). The shear stress is also characterized by grain crushing and wetting process at slip surface.

• The Journal of Natural Sciences
• /
• v.5 no.1
• /
• pp.67-75
• /
• 1992

In the our country, especially in Yeongil and Wolsung area, abundant authigenic zeolites are found from the tuffaceous sediments and volcanic rocks of Miocene age showing wide variation in their mineralogy and abundance from horizon to horizon. The principal zeolite species identified are clinopti-lolite. mordenite. heulandite. ferrierite, and erionite. etc. Zeolite minerals are widely used in many countries in the following applications; (a) in air separation adsorption processes; (b)as desiccants; (c)in inorganic building materials; (d)in papermaking; (e)in fertilizers; (f)as soilconditioners-this application is based upon the ability of the zeolite to ion exchange with soil nutrients; (g)in the treatment of radioactive wastes; and (h)as adsorbents for toxic gases, etc. In the present paper, using natural zeolite mordenite treated with IN hydrochloric acid or IN sodium chloride solution as column packings, separation characteristics of argon, nitrogen, carbon monoxide, and methane gases have been studied by gas chromatography. By the use of mordenite treated with hydrochloric acid solution, the tailing peak of methane showed from untreated mordenite was satisfactorily reduced, although it was difficult to separate it from carbon monoxide with a column activated at $300^{\circ}C$. Using a column activated at $350^{\circ}C$, methane could be separated from carbon monoxide easily but only carbon monoxide eluted as a bad defined peak. Mordenite treated with sodium chloride solution was generally similar to chromatograms obtained by using the untreated mordenite. Both the above chemical treatments of mordenite had little effect on the separations of argon and nitrogen. The separations and the HETP values obtained from natural zeolite mordenite treated with continuously hydrochloric acid and sodium chloride solutions were almost identical with those obtained with synthetic molecular sieve 5A zeolite. On the other hand, the efficiency of column was good in the range 20~3Oml/min of the carrier helium gas rate.

• Korean Journal of Microbiology
• /
• v.52 no.2
• /
• pp.212-219
• /
• 2016

Forty-nine pigments were extracted from the collections of 106 pigment producing bacteria from the plant rhizosphere soil. Antibacterial activity test was performed in the subjects of the extracted pigments with plant pathogenic bacteria including Xanthomonas axonopodis and Xanthomonas campestris, and with plant pathogenic fungi including Botrytis cinerea, Colletotrichum acutatum, and Fusarium oxysporum. The yellow pigment by Chryseobacterium sp. RBR9 and the red pigment by of Methylobacterium sp. RI13 showed the antibacterial activities against Xanthomonas axonopodis and Xanthomonas campestris. The violet pigment by Collimonas sp. DEC-B5 showed the antibacterial activity as well as the antifungal activities against Botrytis cinerea and Fusarium oxysporum. Especially, the violet pigment inhibited the growth of Botrytis cinerea more than 65% at MIC $20{\mu}M$. Upon the HPLC analysis result for the isolation of pigment with antifungal activity, violacein (91.6%) and deoxyviolacein (8.4%) were isolated for the pigment by Collimonas sp. DEC-B5. The production amount of the pigment was increased more than 10 times higher when D-mannitol 1.5% and yeast extract 0.2% were added as the nitrogen source to SCB medium. This study suggests that produced violacein by Collimonas sp. DEC-B5 will be effective to control strawberry gray-mold rot fungi by its preventive activity.

• Journal of the Korean Institute of Gas
• /
• v.2 no.2
• /
• pp.18-25
• /
• 1998

According to the requirements of ANSI B3l.8, the pipe thickness is determined with hoop stress resulted from internal pressure. And the other loads induced by soil, vehicle, thermal expansion, ground subsidence, etc shall be evaluated rationally. There are two ways of calculating stress of buried gas pipeline. The first is FEM. FEM can calculate the stress regardless of the complexity of pipeline shape and boundary conditions. But it needs high cost and long time. The second is the way to use equation. The reliable equations to calculate the stress of buried gas pipeline was developed and have been used in designing pipeline and evaluating pipeline safety, But these equation are very difficult to understand and use for non-specialist. For easy calculation of non-specialist, the new computer program to calculate stress of buried natural gas pipeline have been developed. The stress is calculated by the equations and extrapolation of the graph resulted from FEM. The full paper is consist of series I and II. In this paper, series I, the calculating equation of the program is explained in detail.

• The Korean Journal of Quaternary Research
• /
• v.18 no.1 s.22
• /
• pp.1-20
• /
• 2004

A geoscientific research was performed on 12 samples of comb-pattern potteries which were excavated at Daecheonri neolithic site, Korea. The texture and compositions of 12 potteries and surrounding metrix of soil and rocks were compared with the help of petrographic microscope, XRD and REE data. As to the manufacturing techniques thick potteries are caused by the amount and number of coarse grains which are assumed to be added shards when their distributional pattern are considered. DC1, DC3, DC 7 and DC11 samples have clearly oriented textures, and the orientation of vesicles in DC3 and DC11 samples arranged in the same direction with those on the pottery surface. This indicates the use potter's wheel technique in manufacturing potteries. Burning temperature is assumed over $800^{/circ}C$, particularly under reduction environment. As to the source, raw materials of pottery matrix are derived from the bottom of excavation site, or in an extracted outcrop of the northwestern foothill from site, while the shard materials are very similar with those extracted from sandy loams near sites. Finally any use pattern of pottery may control the pottery thickness, shard addition, and matrix selection.

• Applied Biological Chemistry
• /
• v.35 no.5
• /
• pp.375-381
• /
• 1992

An exoinulase-producing bacterium was isolated from soil, and identified as Streptomyces sp. The maximum inulase production was achieved when inulin as carbon source and soybean meal as organic nitrogen source were included in the culture. The exoinulase was considered to be a constitutive enzyme produced not only by inulin but also by soluble starch or glucose. The purified enzyme on DEAE-cellulose and Sephadex G-200 column showed the maximal activity at $pH\;5.5{\sim}6.0$ and $50^{\circ}C$, but lost 65% inulase activity at $50^{\circ}C$ after 1 hour incubation. This exoinulase was activated by $Mn^{+2}$, wherease more that 80% inactivation was observed with $Ag^+$, $Hg^{+2}$ and $Fe^{+3}$. The enzyme was possibly a metalloenzyme in that EDTA and 8-hydroxyquinoline inhibited the enzyme. Km values for inulin (16.51 mM) and sucrose (14.62 mM) were in very close range suggesting mostly equal affinity toward the subatrates. However, the maximum velocity for inulin was 10 times greater than for sucrose.

• Journal of agriculture & life science
• /
• v.45 no.4
• /
• pp.73-80
• /
• 2011

This study was conducted to elucidate the best cutting condition in propagation of Juniperus chinensis var. sargentii in respect of survival rate, rooting rate, and early growth after cutting via process of cutting time, cutting media, cutting type and growth regulators. As for cutting time, rooting rate was 68.3% on April, which was higher than 39.5% on May and 32.5% on June. The best cutting media was stream sand of rooting rate 72.7%. Those of mixed soil and decomposition were 40.1% and 27.5% each. The effect of growth regulators was different according to the kind of cutting media. There was no effect on stream sand media which showed the highest rooting rate, while it was very effective on the media of decomposition of granite, which rooting rate showed the lowest. Hardwood as cutting materials showed somewhat higher survival and rooting rate compared to semi-hardwood. The cutting with hardwood condition to stream sand on April, it is regarded to be the most effective condition for Juniperus chinensis var. sargentii to increase survival and rooting rate. Therefore in this experiment it is considered that the best season cutting is April, and the most useful media and plant materials stream sand, and hardwood respectively.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.7
• /
• pp.916-922
• /
• 2018

Recently, power plant effluent condensers received a Renewable Energy Certificate as components of hydrothermal energy (weighted 1.5 times) as one target item of the Renewable Portfolio Standard (RPS) policy. Accordingly, more attention is being paid to the value of thermal wastewater as a heat source. However, for utilization of thermal wastewater from power plants in high-turbidity areas like the West Sea of Korea, a turbidity reducing system is required to reduce system contamination. In this study, an experimental test was performed over a month on thermal wastewater from power plants located in the West Sea of Korea. It was found that water turbidity was reduced by more than 80 % and that the concentration of organic materials and nutrient salts was partially reduced due to the reduction of floating/drifting materials. To conduct a comparative analysis of the level of contamination of the heat exchanger when thermal wastewater flows in through a turbidity reducing system versus when the condenser effluent flows in directly without passing through the turbidity system, we disassembled and analyzed heat exchangers operated for 30 days. As a result, it was found that the heat exchanger without a turbidity reducing system had a higher level of contamination. Main contaminants (scale) that flowed in to the heat exchanger included minerals such as $SiO_2$, $Na(Si_3Al)O_8$, $CaCO_3$ and NaCl. It was estimated that marine sediment soil flowed in to the heat exchanger because of the high level of turbidity in the water-intake areas.