• 한국의류학회지
• /
• 제47권2호
• /
• pp.353-370
• /
• 2023

In this study, the performance of ultrasonic cleaners for ultrasonic washing, which is one of the wet cleaning methods, was evaluated. The washing performances of ultrasonic cleaners were compared with commercial washing machines under normal and wool courses based on different parameters such as detergency, wrinkle formation, fabric damage, dimensional stability, and germ removal ability. Cotton, silk and wool were used in this experiment. Results revealed that the ultrasonic washing detergency of cotton fabrics was lower than that of commercial washing machines under the normal course and similar to that of commercial washing machines under the wool course. Detergency of silk fabrics was similar under both normal and wool courses. In terms of wrinkle formation and dimensional stability, ultrasonic cleaners showed lesser wrinkles and lower shrinkage than commercial washing machines. Considering damage evaluation, ultrasonic cleaners more effectively removed soil without damaging fabrics compared with commercial washing machines. The bacteria removal rate of both cotton and silk was more effective than the wool course of a commercial washing machine. Thus, this study compares the performance of ultrasonic cleaners and commercial washing machines and provides meaningful results related to ultrasonic washing performance.

• 한국지반신소재학회논문집
• /
• 제1권1호
• /
• pp.13-21
• /
• 2002

지오텍스타일 튜브를 활용한 해안 및 항만구조물은 해안침식방지 및 토사퇴적을 유도하는 구조물로 준설토를 수리학적 또는 기계적으로 채움을 실시하여 이안제(Detached brekwater), 돌제(Groin), 도류제(Jetty)등의 구조물을 축조한다. 일반적으로, 모래질 토사를 채움토사로 적용할 경우는 채움토사의 침강과 토목섬유의 배수특성을 효율적으로 만족하여 주입구의 간격이 가까우나, 점토질 토사 또는 오염된 슬러지를 채울 경우, 채움토사의 침강속도가 길며 토목섬유의 구멍막힘 현상으로 인하여 주입구의 간격을 넓게 하여 적용한다. 본 논문에서는 송도신도시 공유수면 매립공사 현장에서 점토질 토사를 채움토사로 적용한 지오텍스타일 튜브에 대하여 실대형 현장시험을 실시하였다. 지오텍스타일 튜브의 채움작업은 준설선을 이용한 수리학적 채움을 실시하였으며, 현장계측은 채움단계 및 시간에 따른 유효높이 변화, 내부 채움토사의 위치에 따른 단위중량 변화, 비배수 전단강도 등을 측정하였다. 본 실대형 현장시험에 따른 계측결과, 점토질 토사의 채움 시 침강 및 배수를 위한 단계별 채움 작업이 필요하며, 배수에 따른 최종 유효높이는 채움 작업 시 최고높이의 50%까지 감소하였다.

• 한국지반공학회논문집
• /
• 제24권2호
• /
• pp.87-97
• /
• 2008

단단한 모래 입자와 연약한 고무 입자로 이루어진 Engineered soils을 고결화 시킨 후 $K_o$ 상태에서의 거동 특성을 분석하였다. 고결화 효과에 따른 영향 및 모래부피비에 따른 영향을 파악하기 위하여 다양한 모래부피비를 가지는 비고결화 및 고결화 시료를 준비하여, 수직 응력에 따른 변형 및 탄성파 속도를 측정하였다. 탄성파 속도 측정은 벤더 엘리먼트와 PZT 엘리먼트를 이용하였다. 고결화 이 후 응력에 따른 수직 변형율의 기울기는 이중 선형 관계를 보이며 고결화 결합 파괴 이후에는 비고결화 시료와 비슷한 기울기를 가진다. 정규화된 수직 변형량은 응력에 따라 capillary force, cementation, decementation 구간으로 나눌 수 있다. 근접장 내에서 측정된 전단파 신호의 첫 번째 움직임은 압축파의 도달과 일치하였다. 고결화에 의해 탄성파 속도는 수직 응력의 증가 없이 급격한 증가를 보였으며, 고결화 이후 추가적인 응력 증가에도 일정한 값을 보였다. 고결화 파괴 후 지속적인 수직 응력의 증가에 따라 탄성파속도는 증가하였다. 고결화는 비고결화 시료에서 나타나는 유사고무, 유사모래, 전이 3가지의 거동을 방해한다. 고무-모래 혼합재의 고결화 결합의 파괴 메커니즘은 모래부피비에 따라 다르며 낮은 모래부피비의 시료는 입자 모양의 변화가, 높은 모래부피비 시료에서는 입자 구조의 변화가 고결화 결합의 파괴가 주요한 원인이다. 본 연구를 통해 연약한 고무 입자와 단단한 모래 입자의 혼합재인 Engineered soils의 거동은 고결화 및 고결화 파괴에 따라 비고결화 시료와 구분됨을 알 수 있었다.

• 한국의류학회지
• /
• 제29권12호
• /
• pp.1608-1618
• /
• 2005

본 연구는 꼭두서니와 그 표준 색소인 알리자린으로 염색한 직물에 조건적 퇴화를 유도하고, 가스 크로마토그라피 질량분석기(GC-MS)를 이용해 퇴화물을 분석하여 이를 선행연구에서 밝혀진 표준 알리자린 색소의 퇴화물과 비교함으로써 대조구로서의 꼭두서니 염료의 정보를 완성하는데 그 목적을 둔다. 아울러 퇴화 전후 염직물의 색차를 측정하여 조건퇴화에 따른 색의 변화를 조사하였다. 퇴화조건은 상온 (RT), 저온$(7^{\circ}C)$ (LT), 고온$(100^{\circ}C)$(OV)의 세 종류의 온도 조건과 염료 폐수처리 용도로 활용되고 있는 $H_2O_2/UV$법 (PER)을 사용하였다. 퇴화시간은 6시간, 24시간, 48시간, 1주, 2주, 4주 각각을 측정하였다. 꼭두서니와 알리자린 염직물 모두 퇴화 전후의 시료에서 alizarin(10.1분)이 검출되었다. 꼭두서니와 알리자린 염직물 모두 퇴화 후 benzoic acid(4.7분), 2,4-di-tert-butylphenol(6.8분), phthalic anhydride(5.8분)가 검출되었다. 꼭두서니와 알리자린 염직물 모두 퇴화 후 붉은색과 노란색이 감소하였다. 꼭두서니 염직물보다 알리자린 염직물의 경우 퇴화 전후의 색차가 더 심하였다. 그러나 가장 퇴화조건이 강한 PER퇴화조건 하에서는 꼭두서니 염직물의 색차가 1주 경과 후에도 매우 심하게 나는 것을 볼 수 있었다. 본 연구의 결과꼭두서니와 그 표준 색소로 염색한 직물이 퇴화할 경우에도 선행연구에서 밝혀진 알리자린의 퇴화물인 benzoic acid, 2,4-di-tert-butylphenol, phthalic anhydride가 검출됨을 확인하였다. 따라서 이들 화합물은 갈변되어 고유의 색을 알 수 없는 출토복식의 염료를 판정할 때 꼭두서니 염료의 사용여부를 확인할 수 있는 대조구 화합물로 사용될 수 있을 것으로 사료된다. 퇴화 전후의 색차에 대한 측정결과는 퇴화에 따른 염료의 색 변화에 대한 결과이다 출토복식의 갈변현상은 염료의 변색과 더불어 토양 유기물에 의한 착색도 기인하므로, 출토복식의 색상 변화를 실질적으로 조사하기 위해서는 본 연구의 결과와 함께 토양유기물에 의한 착색에 대한 연구가 병행되어야 할 것으로 본다

• 한국의류학회지
• /
• 제23권6호
• /
• pp.788-799
• /
• 1999

This study was performed to investigate the effect of mordants on the dyeability colorfastness to light and to laundering and biological properties of mordanted and natural-dyed cotton and silk substrates. Natural red dyes were extracted from Caesalpinia Sappan L. (Sappan wood) and Rubia Akane Nakai (Madder) by boil water Five different compounds of Al, Cr, Cu, Fe and Sn were used as mordanting agents. The result of this study are sumarized as follows ; 1. In the of the fabrics mordanted and dyed with sappan wood K/S value increases and λmax shifts to the longer wavelength as mordant concentration increases. Color of the fabrics dyed with sappan wood and madder change to redder bluer and lighter after mordanting. 2. As the number of repetition of dyeing-mordnating process increase the color of the dyed fabrics tend to be redder bluer and darker. Mordanted dyes with Al and Sn make chroma increase. The quantity of mordant absorbed in the silk fabric increase as mordant concentration increase. More Fe is absorbed in silk than Cr is. 3. After being exposed to light the fabrics dyed with sappan wood and madder change to less red Fe and Cu mordanting yeild better colorfastness to light than others does. Natural-dyed fabrics exposed to light tend to be faded and whitened in CIELAB chromaticity co-ordinates. So we might trace back the original color of ancient faded fabrics by changes in color of natural dyes. 4. After washing the colors of natural dyes change to more blue, Fe and Cu mordanting give better colorfastness to wash than others do. 5. The soil-burial cotton is more susceptible to mildew and rot than the silk is. Antimicrobial activity of the natural-dyed cotton can be enhanced by Cu and silk can be enhanced by Cu and Cr mordanting respectively.

• 한국의류학회지
• /
• 제33권8호
• /
• pp.1227-1240
• /
• 2009

This study examines the actual conditions of toddler playwear preference survey for design and function. The study develops proper indoor and outdoor playwear for toddlers based on the analysis. A survey of 200 parents with toddlers between 2 and 6 years old and 120 teachers was conducted to find the conditions and needs for playwear along with the necessary design elements. Second, 6 designs including 3 designs for indoor playwear and 3 designs for outdoor playwear were made. These designs emphasized on soil contamination part, color, pattern, form, material, detail, and fasteners. Art play and cooking play are considered for indoor playwear and ways to decrease contamination on sleeve hem, elbow, chest, and knee were determined through the use of yellow, green, and blue colors. Applying a character and separate top with sleeves were determined. Light with breathable and waterproof fabric was determined. The correct amount of Velcro fasteners or buttons was determined for front fastening in addition a pocket was considered necessary as a detail part. The common design for both boys and girls along with a proper design for diverse play were determined. For outdoor playwear, water play, sand play, movement play, and ecology experience are considered and ways to decease contamination on hip, sleeve hem, and knee should be applied to the design as determined through the use of yellow, green, blue, and red colors. The demands for pattern, form, material, and details were similar to indoor playwear. Zipper and buttons for front fastening were determined. These final 6 playwear designs are presented using CAD WALK DESIGNWARE.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.281-292
• /
• 2008

Prefabricated Board Drains (PBDs) recently become more widely used than conventional sand drains in improving soft ground because the PBD is more time and cost effective. The performance of PBDs is affected by disturbance in the adjacent soil formation during inserting mandrels, the intrusion of fine particles into filter fabric, and necking of the drain by excessive lateral pressure especially occurring in very deep clay formation such as the Busan New Port site. In this study, the PBD with double-core is introduced, which seems to overcome the shortcomings of usual single-core PBDs. An in-situ test program was established in the Busan New Port site, in which a set of the double-core PBDs and the single-core PBDs was installed to compare the efficiency of each of the drains. The discharge capacity of the double-core and the single-core PBDs was compared for various confining pressures in the modified Delft test and the chamber test. A series of CRS consolidation tests was performed in order to obtain profiles of void ratio-effective stress and void ratio-permeability relationships in the Busan New Port site that are used as input date in performing a numerical program ILLICON. The numerically simulated settlements of ground surface in the test site are in good agreement with those of in-situ measurements. In addition, the performance of the double-core and single-core PBDs has been experimentally and numerically compared in this paper.

• 복식
• /
• 제63권7호
• /
• pp.79-93
• /
• 2013

In the Korean literature, records of systematic gold thread manufacturing such as gold foil(金 箔匠), gold foil bonded with fabrics(付金匠), gold foil bonded with paper materials(金箋紙匠), refining gold(鍊金匠), cutting gold(裁金匠), and making gold thread(絲金匠) can be easily found. We can infer from these literatures that the Korean people used to make gold threads. However, is not existent the gold thread making technique. Thus, a research was done using 67 pieces of gold thread artifacts used in textiles craft of Korea, China and Japan. The purpose of this research was to identify the characteristics of the Korean gold thread by studying the artifacts' form classification, gold foil, glue and the base. First, gold thread is divided into flat gold thread and wrapped gold thread. Wrapped gold thread was made in more various methods such as with a paper on the flat gold thread, metal thread and wrapped gold thread with gold foil on top. Compared to the flat gold thread, wrapped gold thread uses a thread that has a thinner and wider. Through this analysis, even making of the base of the gold threads was different according to the type. Secondly, we looked into the characteristics of materials according to form structure of the gold thread. After analysis of experiment results, we could know that to attach Korean gold thread, glue and the mixture of materials such as Red soil(朱土) was also added. The kinds of the base of gold threads were identified as paper, leather and intestines. Among those materials, for paper, Korea's Dakji, China's Sangpiji(桑皮紙) and Jukji(竹紙) and Japan's Anpiji(雁皮紙) seemed to have all been used, so because of the difference among countries, we can prove that Korea has also produced gold thread. By looking at the research, the base of gold threads and making features hugely vary according to the area.

• 복식
• /
• 제49권
• /
• pp.49-63
• /
• 1999

This research utilized the Energy Dispersive X-ray Spectroscopy(EDS) and the Inductively Coupled Plasma Mass Spectrometry in the analysis of chemical elements present among the textiles exhumed from Kupori Hwasung-kun Kyunggi-do. The two research objectives were: first to examine the elements present and their percent presence in Kupori samples: second to investigate whether the elements are part of mordant substances which could have been used when dyeing the KUpori textiles in the past. To meet such research purposes standard silk fabric was dyed with Sophorajaponica using alum and iron mordants. For alum mordant unpurified general alum and potassium aluminum sulfate(AlK(SO4)2). iron sulfate(FeSO4·7H2O) were used, From the results of EDS and ICP-Mass analysis the following conclusions were drawn. 1 According to the EDS analysis 9 elements Ca, S, Al, Si, K, Fe, P, Mg and Na were detected. 2. ICP-Mass result of the mordant chemicas showed high amount of A, Al and k present in alum mordants and S and Fe present in iron mordants. 3. Comparison of the ICP-Mass results of the mordant chemicals and those of the standard dyed samples suggested that the amount presence of Al and Fe is a strong indication of the usage of alum and iron mordants respecticely in an unknown dyed textile. 4, In the washed Kupori textiles Fe showed a relatively higher rate of presence in the samples Therefore it can be conjectured that those Kupori textiles were dyed with iron mordant based on the result of the above number 3. 5. It is probable that the other elements detected from the Kupori samples were incorporated into the textiles as part of the soil debris produced from the degradation of the dead within the coffin or the earth debris. They can also be part of the inorganic compounds inherent in the silk textiles themselves before dyed. 6. Among the elements it is likely that Ca which showed a high degree of presence among the unwashed samples was part of the inorganic compound inferent in the silk textiles.

• 한국의류산업학회지
• /
• 제14권3호
• /
• pp.492-500
• /
• 2012

Cocoa is a popular drink for children and contains healthy polyphenols however; a deep brown stain is left when cocoa is spilled over clothes. The main pigments in cocoa are anthocyanins that change in washing solutions with different alkalinity and metals. The removal and color changes in a cocoa stain after washing with various pH solutions and water hardness were studied. Alkalinity and the water hardness of washing solutions were important factors for the removal of cocoa stains. The removal of cocoa things in washing solutions without detergent was low (and even became negative after removal and darker) in solutions with a pH 9 and above. The cocoa stain was not removed and only the fabric color faded, although the cocoa stained cloth was washed with Korea tap water that has a pH of 7. The cocoa stain removal in detergent solutions was conspicuously higher than for only water. Even in detergent solutions, the cocoa stain removal decreased as water hardness increased. Cocoa stain removal was more effective and the color dimmest when the stained cloth was washed in a solution without the metal cations, and the bleach added with the detergent at a temperature of $40^{\circ}C$ and for longer than 20 minutes. Effective and economical equipment for tap water softening for a washing machine should be developed and used to improve cocoa stain removal.