• Journal of Korean Society of Forest Science
• /
• v.90 no.3
• /
• pp.257-265
• /
• 2001

This study was carried out to investigate composition and distribution of the soil microarthropods in Pinus rigida plantations following strip-cutting from May 1998 to April 1999. The results of this study were as follows; 1. The individuals of soil microarthropods found during the research periods were 181, 904 and were identified into 21 orders in 7 classes. The classes were Arachnida, Insecta, Malacostra, Pauropoda, Diplopoda, Chilopoda and Symphyla. 2. The population density of the soil microarthropods was 82,962 individuals at the control area, 62,688 individuals at the reserve area and 36,254 individuals at the cutting area. The microarthropods in the control area were 2 times higher than those in the cutting area. 3. Although the major dominant taxa, Acari and Collembola, decreased in densities at the cutting area, the density reduction in Acari was higher than that in Collembola. This resulted in the increase of Collembola in terms of the relative abundance at the cutting area. 4. Among the total soil microarthropods, Arachnida was 59.74%, followed by Insecta of 39.82%. Such two groups comprise 99.56% of soil microarthropods. 5. According to the relative population density, Acari was 99.18% in Arachnida and 59.25% in the total and Collembola 93.99% in Insecta and 37.42% in the total. Therefore, individuals of Acari and Collembola was 96.67% of the total individuals. And the next abundant groups were Hymenoptera (0.95%), Diptera (0.64%) and Pseudoscorpiones (0.39%). 6. The population density of the soil microarthropods fluctuated seasonally, showing the bimodal pattern, being high in fall and spring. The highest density occurred in November and the lowest in July.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.2
• /
• pp.82-90
• /
• 2007

Recently, the development project is conducting disaster effect estimation to breed disaster, and cope these disaster beforehand provoking soil erosion and flood. Therefore, it is important to analyze and reduce of these disaster. In this study, it is intended to extract LS and C factors of soil erosion through the digital image. The photogrammetric technique, which employs the Remote Control Helicopter equipped with a non-metric digital camera, was used for the efficient survey and analysis of cutting slopes. As a result, we obtain more objective value of soil erosion factor using digital image.

• Korean Journal of Plant Resources
• /
• v.11 no.3
• /
• pp.353-357
• /
• 1998

This study was conducted to determine the effect of growth regulators, genotype, and cutting position on the rooting and root growth from cutting of Chrysanthemum zawadskii H.. Rooting rate of Keungugeolcho in the treatement of IBA 500 and 1000 ppm was the better than those of other treatments of IAA, NAA and Rooton. Rooting rate differed depending on the genotype. Hangryobonggugeolcho was better than Keungucheolcho in rooting rate. The treatment of rooton remarkably induced many roots from the cuttings of eight accessions of Chrysanthemum zawadskii H.. Also, rooting rate and number of root differed depending on cutting position. When cuttings including shoot tip were cultured on tray containing bed soil, rooting rate and number of root induced from cuttings with shoot tip was higher than when cuttings without shoot tip and with lateral axillary bud were cultured.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.129-132
• /
• 2003

Used cutting fluid from machining processes is harmful to both environment and human health. Chemical substances that provide the lubrication function in the machining process are toxtc to the environment if the cutting fluid is released to soil and water and caused serious health problems to workers who are exposed to the cutting fluid in both liquid and mist form. Recently. cost of using cutting fluid is increasing as the number and the extensiveness of environmental protection laws and regulations increase. Therefore, the use of cutting fluid in machining processes place an enormous burden on manufacturing companies to cover the additional costs associated with their use and protection of our environment. Current trends in manufacturing are focused on minimizing or eliminating the use of metalworking fluids in machining processes. And the increased costs for the disposal of waste products (swarf, coolants and lubricants), especially in industrially developed countries, has generated interest in dry machining. A variety of new techniques are testimony that new technology has rationalized further efforts to research and implement dry machining processes. This paper presents the developed equipment, the process optimization and the applications in the field of surface grinding for the new cryogenic dry machining using a compressed cooling air. The investigated new machining process method shows many advantages compared to conventional techniques with cutting fluid.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.6
• /
• pp.992-997
• /
• 2012

This study was conducted to get the basic information for absorb enhancement of accumulated soil nutrients in plastic film house. The grain sorghum (Sorghum bicolor L.) was sowing in plastic film house which soil nutrient accumulated moderately and was cutting at major growth period of sorghum. We were analyzed the regrowth pattern, biomass due to cutting time and amount of plant nutrient of grain sorghum. The obtained results were as follows. The heading date after cutting of sorghum in plastic film house was came to about 35 days. The accumulated of plant height were the longest as 379.4 cm in cutting at milk stage. The total biomass of sorghum in cutting at heading stage was 1.73 ton $10a^{-1}$ in cutting at heading stage. The high grain yields were produced with non-cutting and cutting at 10 leaves stage as 75~113 kg $10a^{-1}$ but the lowest grain yields were the cutting plots at booting stage as below 24 kg $10a^{-1}$. The content of nutrient in sorghum plant was low as progress of growth. The concentrations in aboveground sorghum due to plant parts was in order to leaves > panicle > stalk. The nitrogen content of sorghum was 0.6~0.7% in stalk, 1.5~1.6% in panicle and 1.8~2.3% in leaves. The amount of nutrient absorbed in sorghum was 4.2 kg $10a^{-1}$ in nitrogen, 1.7 kg $10a^{-1}$ phosphorus and 7.7 kg $10a^{-1}$ in potassium and the absorbing different by cutting time in order to booting > non-cutting > panicle formation ${\geq}$ milk ripe > 10 leaves stage.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.10 no.6
• /
• pp.139-151
• /
• 2007

To protect the surface of ground-cutting slopes and ground-raised slopes and to recover environment-friendly slopes at the national road expansion construction between Gamchon and Yaechon, test-construction work was done using several modes of hydro-seeding measures to select a suitable construction method through the field survey; the results were as follows : As a result of survey on physio-chemical characteristics of soil, the average soil inclination on ground-raised slopes was from 4.73 mm to 5.37 mm; the average soil acidity was from pH 6.47 to 6.73; the average soil humidity was within the scope of 0.57~1.70 %,; the average soil inclination on ground-cutting slopes was 9.17~10.43mm; the average soil acidity was pH 6.67~6.77 and the average soil humidity was within the scope of 0.53~1.27 %; considered overall, they showed generally satisfactory base materials for plant breeding. As a result of the number of sprouting individuals, the average sprouting number of individuals on test spots executed by Coir net with Seed spray construction methods and the average number of sprouting individuals on other test spots executed by furrow-digging with Seed spray and Straw mat-mulching measures were 1,172 number of per square meter and 970 number of per square meter respectively; thus they showed higher numerical value comparing with other test spots. Likewise, the average number of sprouting individuals on test spots of the ground-cutting slopes executed by Coir net with Seed spray method and the average number of sprouting individuals on other test spot executed by furrow-digger with Seed spray and Straw mat-mulching measures were found to be 1,107 number of per square meter and 1,105 number of per square meter respectively, whose numerical value showed rather higher other test spots. As a result of a survey on living plants' breeding index [dried weight], the weight in dried state on test spots executed by Coir net with Seed spray method and other test spots executed by furrow-digger with Seed spray and Straw mat-mulching measures on both ground-raised and ground-cutting slopes was found to be higher and showed similar characteristics statistically. As a result of survey on the surface-covering degree of ground-raised slopes, nine weeks after test construction, test spots executed by Coir net with Seed spray method and other test spots executed by furrow-digger with Seed spray and Straw mat-mulching measures showed commonly more than 70% of surface-covering degree, but other test spots showed only below 35% of surface covering degree; especially in case of test spots by Verdvol seed spray measures, they showed 10% of the lowest surface-covering. Surface-covering degree on the test spot of ground-cutting slopes nine weeks after test construction showed more than 75% both executed by Coir net with Seed spray construction method and executed by furrow-digger with Seed spray and Straw mat-mulching measures. As a result of survey on appearing plants on the test spots, there dominates Eragrostis curvula both on ground-raised slopes and on ground-cutting slopes with other seeding plant life's lower breeding and there appear intruders, such as Setaria viridis Beauv, Digitaria sanguinalis Scop, and Chenopodium album var.centrorubrum Makino. As for water-borne excavation and soil's washing-away on the slopes, there happened less washing-away and water-borne excavation with good breeding of plant life on test spots executed both by Coir net with Seed spray construction method and by furrow-digger with Seed spray and Straw mat-mulching measures, but there happened much more soil's washing-away along with water-home excavation at the test spot executed by Seed spray with measures. After the research results of test construction sites are examined overall, it's presumed that furrow-digger with Seed spray and Straw mat-mulching measures [interval between lines is 40cm, 5cm in depth] will be preferred to prevent erosion and water-home excavation of slopes located within the construction sites.

• Agricultural and Biosystems Engineering
• /
• v.6 no.2
• /
• pp.39-46
• /
• 2005

Because soil compaction is a concern in crop production and environmental pollution, quantification and management of spatial and vertical variability in soil compaction for soil strength) would be a useful aspect of site -specific field management. In this paper, a soil strength profile sensor (SSPS) that could take measurements continuously while traveling across the field was developed and the performance was evaluated through laboratory and field tests. The SSPS obtained data simultaneously at 5 evenly spaced depths up to 50 em using an array of load cells, each of which was interfaced with a soil-cutting tip. Means of soil strength measurements collected in adjacent, parallel transects were not significantly different, confirming the repeatability of soil strength sensing with the SSPS. Maps created with sensor data showed spatial and vertical variability in soil strength. Depth to the restrictive layer was different for different field locations, and only 5 to 16% of the tested field areas were highly compacted.

• Journal of Sericultural and Entomological Science
• /
• v.28 no.2
• /
• pp.9-14
• /
• 1986

The rootability of hardwood cutting of mulberry (Morus alba L.) depending upon the kinds of cutting beds, soil of cutting beds, effect of growth regulator (Rootone-F), pretreatments of cutting scion, parts of branches were investigated, The results were as follows ; 1. Rootability was the highest in cutting after callus formed on sand bed, whereas null in the treatment of rice seedling hot bed. 2. Optimum cutting season was around March 26, showed 100% rootability in all treatments except wooden box filled with sand. 3. The order of rootability related with cutting part of branch was upper$^{\circ}C$), and cutting after formation of callus increased rootability, whereas cuttings left in open air for 5 days showed null rootability.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2006.09a
• /
• pp.59-79
• /
• 2006

The successful execution of shield tunnelling depends on the cutting ability of cutter. So the selection of shape, size and material of cutter according to geology condition is important work. Since shield tunnelling method was first invented in 1881, the cutting tool for rock has been developed owing to various experiments and researches, the study for soil, however, is insufficient. This paper introduces the shield tunnelling that will be carried out on weathered rock section (920m) of Seoul Subway Line 7 Extension C703. The shape and the material of cutter are discussed required for execution without replacement of cutter tool as well as for advance of excavation efficiency. In addition the estimation method of cutter abrasion in case of excavation on weathered soil is proposed and verified. Specially, the coefficient of abrasion for different soil and cutter is proposed by means of investigation into construction example of foreign country.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.8 no.3
• /
• pp.152-157
• /
• 1988

The effect of gypsum application was tested on dry matter yield, sulfur uptaken, composition of Ritrogen compound and sulhr compound and sulfur balance in mixed pasture. Total dry matter yields and sulfur uptake by grasses increased with the increasing of gypsum application rates. The ratios between total nitrogen and total sulfur in masses decreased with the increase of sulfur uptake at 2nd and 3rd cutting times. Cysteine content was little affected by gypsum while methionine content slightly increased an 4.0, 6.0 kg3 per 10a levels at 2nd and 3rd cutting times. The uptake of nitrate nitrogen decreased with gypsum application and dry matter digestibility increased about 1.1 to 3.3%. The soil pHs after experiment become high in surface and subsoil till 6.0 kg.S per 10a, but low at 10.0 kg.S per 10a. The content of sulfur in surface soil was 19.9 ppm after experiment, but very high in subsoi1,ranging from 94 to 143 ppm.S. Sulfur leached from the surface soil by 0.69, 2.39, and 6.24 kg.S per 10a in the plots of 4.0, 6.0, and 10.0 kg.S per 10a, respectively.