• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2005.10a
• /
• pp.182-182
• /
• 2005

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.13 no.6
• /
• pp.97-106
• /
• 2010

Earthworm, a prominent ecosystem engineer within many terrestrial ecosystems, can exert profound influences on various abiotic/biotic environments through bioturbation processes such as burrowing, casting and mixing of litter and soil. In this study, we investigated how the presence or absence of earthworm (Oligochaeta) can alter the soil physico-chemical conditions and ultimately the distribution and abundance of Collembola which constitutes a large proportion of the soil fauna. During September 2010, soil organisms along with soil samples were collected from randomly installed 20 plots in Mt. Gwan-ak. We examined the differences in the abundance of Collembola among plot samples in respect to the presence/absence of earthworm and soil physico-chemical conditions (i.e., pH, $PO_4^{3-}$, $NO_3^{2-}$, organic matter (OM), electrical conductance and water content). Analysis of soil physico-chemical environment revealed a significantly higher organic matter content and electrical conductance in plots with earthworm compared to plots without earthworm. Abundance of Collembola were not only higher in plots with earthworm than in plots without earthworm, but were also positively correlated with availability of OM present in the environment. The results suggest that positive impacts of earthworm on the abundance of Collembola in this study may have been due to their ability to effectively modify soil physico-chemical conditions favored by Collembola. Such conspicuous influence of earthworm's activity on below-ground community suggests their potential significance in forest restoration or revegetation process.

• Journal of Bio-Environment Control
• /
• v.12 no.1
• /
• pp.38-44
• /
• 2003

This work was conducted to estimate amounts of irrigating water during the growing periods of pepper after estimating water consumption in the plastic film house in 1997 and 1998. Evapo-transpiration (ET) under conditions of a black and white PE mulch and sandy or clay loam soil which enhanced the growth and yield of red peppers was greater than that at the bare and sand soil. Average ET of pepper grown in pots accounted for 56.5%∼79.7% of total supplying water in 1997 and 1998. Most of ET was proportioned to the transpiration amount (91∼94%), but there was some difference between amounts of ET and transpiration plus evaporation. Although 57 depended on conditions of the soil texture and plant growth, transpiration for pepper growing periods was amounted to 337.7∼774.3 m in the clay soil,910.6 m in the sandy loam soil, and 253.1 mm in the sandy soil.

• Journal of agriculture & life science
• /
• v.53 no.5
• /
• pp.37-49
• /
• 2019

Environmental conditions are important in increasing the fruit sugar content and productivity of the new cultivar Autumn Sense of Actinidia arguta. We analyzed various soil properties at experimental sites in South Korea. A Pearson's correlation analysis was performed between the soil properties and sugar content or productivity of Autumn Sense. Further, a decision tree was used to determine the optimal soil conditions. The difference in the fruit size, sugar content, and productivity of Autumn Sense across sites was significant, confirming the effects of soil properties. The decision tree analysis showed that a soil C/N ratio of over 11.49 predicted a sugar content of more than 7°Bx at harvest time, and soil electrical capacity below 131.83 µS/cm predicted productivity more than 50 kg/vine at harvest time. Our results present the soil conditions required to increase the sugar content or productivity of Autumn Sense, a new A. arguta cultivar in South Korea.

• Korean Journal of Soil Science and Fertilizer
• /
• v.48 no.1
• /
• pp.50-56
• /
• 2015

This research was performed to test the hypothesis that the optimal fertilization rate for lettuce is various with soil moisture conditions. The experiment was conducted under a rainfall-intercepted facility in Suwon, South Korea from 2002 to 2003. Soil was irrigated at 30, 50, or 80 kPa of soil moisture tension at 15 cm soil depth in 2002 spring and fall and 20, 30, 50, or 80 kPa in 2003 spring. Fertilization was performed with four levels in spring for both years: none, 0.5, 1.0, and 1.5 times of the recommended N, P, and K fertilization rate. The irrigation amount increased with decreased irrigation starting point as soil moisture tension. The maximum yield was found at the lowest soil moisture tension in spring while irrigation at 50 kPa resulted in the greatest yield in fall. The yield responses of lettuce to fertilization rates were various with soil moisture condition. In spring, maximum yield was found at 1.0 or 1.5 times of the recommended fertilization rate at 20, 30, and 50 kPa irrigation while 0.5 or 1.0 times of fertilization rate resulted in the maximum yield in fall. Especially for 80 kPa irrigation in 2003 spring, yield was decreased by fertilization. It suggested that the optimum fertilization rate for lettuce is affected by soil moisture condition and that lower fertilization rate should be suggested when soil is managed in drier condition.

• Journal of Biosystems Engineering
• /
• v.40 no.4
• /
• pp.305-313
• /
• 2015

Purpose: This study was performed to predict the fatigue life of a crank-type rotavator operated in domestic soil conditions using Recurdyn$^{(R)}$, a dynamic analysis program. Methods: Torque on the PTO shaft was measured using experiments conducted on the uplands and paddy fields in Korea. On the basis of the experimental and analytical results, the fatigue life of the crank-type rotavator was predicted by constructing an S-N curve according to the GL (Germanischer Lloyd Wind Energie GmbH) guideline. Results: The torques experienced by the PTO shaft in the paddy soil and the uplands were in the range of 472~797 N m and 313~430 N m, respectively, for every condition. In case of load condition, the peak torques (846 N m, 770 N m) were applied for severe conditions, resulting in a maximum (von Mises) stress of 75 MPa at the crank arm. The fatigue life of the crank-type rotavator was predicted to be 1,167 h that satisfies the target value of 1,110 h, by substituting the analysis results into an S-N curve of crank arm. Conclusions: The fatigue life of the crank-type rotavator was within the target life for the studied soil conditions; however, further field experiments for various soil conditions would be required to verify the prediction results.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.1166-1175
• /
• 1993

The objective of this study is to measure contra-retractive adhesion and lift resistance acting on the rim section of a circular wheel for analyses of their effects on the dynamic load. A circular iron wheel was used for experiments. A part of the wheel rim was cut off, and transducers which can measure normal and tangential forces were installed in this section. Experiments were conducted on a laboratory soil bin which was filled with clayey soil under wet and dry conditions. The mechanism of generating contra -retractive adhesion on a circular wheel were analyzed by the experiments and motion analyses of the wheel. Effects of lift resistance on dynamic load were analyzed by measured forces under wet soil conditions in comparison in comparison with those under dry conditions. The showed that a part of the lift resistance were transferred to the dynamic load. These results may become basic data and ideas for analyses of tractor dynamic under wet soil conditions.

• Geomechanics and Engineering
• /
• v.1 no.1
• /
• pp.35-52
• /
• 2009

A significantly thick zone of steep slopes is commonly encountered above groundwater table and the soils within this zone are unsaturated with negative pore-water pressures (i.e., matric suction). Matric suction contributes significantly to the shear strength of soil and to the factor of safety of unsaturated slopes. However, infiltration during rainfall increases the pore-water pressure in soil resulting in a decrease in the matric suction and the shear strength of the soil. As a result, rainfall infiltration may eventually trigger a slope failure. Therefore, understanding of shear strength characteristics of saturated and unsaturated soils under shearing-infiltration (SI) conditions have direct implications in assessment of slope stability under rainfall conditions. This paper presents results from a series of consolidated drained (CD) and shearing-infiltration (SI) tests. Results show that the failure envelope obtained from the shearing-infiltration tests is independent of the infiltration rate. Failure envelopes obtained from CD and SI tests appear to be similar. For practical purposes the shear strength parameters from the CD tests can be used in stability analyses of slopes under rainfall conditions. The SI tests might be performed to obtain more conservative shear strength parameters and to study the pore-water pressure changes during infiltration.

• Geomechanics and Engineering
• /
• v.23 no.3
• /
• pp.289-300
• /
• 2020

With the rapid development of the distributed strain sensing (DSS) technology, the strain becomes an alternative monitoring parameter to analyze slope stability conditions. Previous studies reveal that the horizontal strain measurements can be used to evaluate the deformation pattern and failure mechanism of soil slopes, but they fail to consider various influential factors. Regarding the horizontal strain as a key parameter, this study aims to investigate the stability condition of a locally loaded slope by adopting the variable-controlling method and conducting a strength reduction finite element analysis. The strain distributions and factors of safety in different conditions, such as slope ratio, soil strength parameters and loading locations, are investigated. The results demonstrate that the soil strain distribution is closely related to the slope stability condition. As the slope ratio increases, more tensile strains accumulate in the slope mass under surcharge loading. The cohesion and the friction angle of soil have exponential relationships with the strain parameters. They also display close relationships with the factors of safety. With an increasing distance from the slope edge to the loading position, the transition from slope instability to ultimate bearing capacity failure can be illustrated from the strain perspective.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.19 no.1
• /
• pp.45-59
• /
• 2016

Vegetation and soil conditions of four sites in west coastal forests in South Korea, were examined to analyze the relationship between Pinus thunbergii forests structure and soil conditions. The P. thunbergii forests were divided into four clusters; 1) P. thunbergii - Prunus sargentii var. sargentii, 2) P. thunbergii - Robinia pseudoacacia, 3) P. thunbergii - P. densiflora and 4) P. thunbergii - Quercus serrata. The soil of each site was poor in chemical characteristics but good enough for land plants to grow because of its low salt concentration. According to the results by CCA Ordination, certain excessive soil nutrition has influenced on vegetation and specific species distribution. Forty eight species were found in the whole sites of coastal forests and some species appeared in every site. They are P. thunbergii, R. pseudoacacia, Rhus chinensis, Idesia polycarpa and Morus alba. For the tree species importance value, P. thunbergii was followed by R. pseudoacacia, Q. serrata, P. densiflora, Celtis sinensis, M. alba, I. polycarpa and Q. mongolica in order.