• KIPS Transactions on Software and Data Engineering
• /
• v.3 no.10
• /
• pp.421-428
• /
• 2014

Like Alzheimer's disease, Parkinson's Disease(PD) is one of the most common neurodegenerative brain disorders. PD results from the deterioration of dopaminergic neurons in the brain region called the substantia nigra. Currently there is no cure for PD, but diagnosing in its early stage is important to provide treatments for relieving the symptoms and maintaining quality of life. Unlike many diagnosis methods of PD which use a single biomarker, we developed a diagnosis method that uses both biochemical biomarkers and imaging biomarkers. Our method uses ${\alpha}$-synuclein protein levels in the cerebrospinal fluid and diffusion tensor images(DTI). It achieved an accuracy over 91.3% in the 10-fold cross validation, and the best accuracy of 72% in an independent testing, which suggests a possibility for early detection of PD. We also analyzed the characteristics of the brain fiber pathways of Parkinson's disease patients and normal elderly people.

• KIPS Transactions on Software and Data Engineering
• /
• v.3 no.6
• /
• pp.201-214
• /
• 2014

In this paper, we propose a test case generation method adequate to destructive test of the BLDC(Brush Less Direct Current) motor controller used for the MDPS(Motor Driven Power Steering) system embedded in an automobile. The proposed method is a modified CTM(Classification Tree Method). CTM generates test cases assuming that all inputs are equally important. Therefore, it is very hard to generate test cases for extreme situations. To overcome the drawback and generate test cases specialized for destructive test. a modified CTM that compensates the limitation of traditional CTM is proposed. The proposed method has an advantage that it can intensively generate the test scenarios adequate to extreme situations by combining the test cases generated by the transitional CTM the while keeping the merit of the traditional CTM. The test scenarios for destructive test for the MDPS system embedded in a commercial automobile are generated utilizing the proposed method. The effectiveness of the proposed algorithm is verified through the test.

• Smart Media Journal
• /
• v.9 no.3
• /
• pp.71-79
• /
• 2020

Mobile network is used by many users worldwide for diverse services, including phone-call, messaging and data transfer over the Internet. However, this network may experience massive damage if it is exposed to cyber-attacks or denial-of-service attacks via wireless communication interference. Because the mobile network is also used as an emergency network in cases of disaster, evaluation or verification for security and safety is necessary as an important nation-wide asset. However, it is not easy to analyze the mobile core network because it's built and serviced by private service providers, exclusively operated, and there is even no separate network for testing. Thus, in this paper, a virtual mobile network is built using OpenAirInterface, which is implemented based on 3GPP standards and provided as an open source software, and the structure and protocols of the core network are analyzed. In particular, the S1AP protocol messages captured on S1-MME, the interface between the base station eNodeB and the mobility manager MME, are analyzed to identify potential security threats by evaluating the effect of the messages sent from the user terminal UE to the mobile core network.

• The Journal of the Korea Contents Association
• /
• v.7 no.6
• /
• pp.177-184
• /
• 2007

The purpose of this study is to develop tool that makes students and teachers generate the music therapy system of type as they want by using existing several web-based component technologies. This study develops tool that can generate psychological testing system and users can select image(visual expression) that represents best their psychological state and after some stage can listen the most adequate music in that situation and it can be used as a music therapy too. This tool makes be possible for developer to input and arrange question types and stages, images that can show images connected with them and to offer skill that let them hear adequate music after deciding psychological state. This system development will be able to approach the contents development which is various from education field effectively in order.

• The Journal of Korean Physical Therapy
• /
• v.21 no.4
• /
• pp.37-42
• /
• 2009

Purpose: The purpose of this study was to determine the effect of physical performance on bone mineral density (BMD) in elderly women. Methods: Twenty-one elderly women participated in this study. After testing functional ambulation category (FAC), they were classified into two groups: dependent walking group, those who could not walk independently (FAC 0~2, n=11) and independent walking group those who could walk independently (FAC 3~5, n=10). Outcome measures were: general characteristics, physical performance and BMD. General characteristics included age, body mass index (BMI) and waist-hip ratio. Physical performance included the chair rise test (CRT) and the modified fall efficacy scale (MFES). BMD was represented in the osteoporosis index (OI), T-score and Z-score. BMD was evaluated in calcaneal bone, using OsteoPro. The data was analyzed using SPSS 12.0 software and the Mann-Whitney U test and the Spearman correlation. Results: Age, BMI and waist hip ratio, which all affect BMD, showed no significant differences between groups (p>0.05). But the FAC 3~5 group showed a significantly higher score for CRT, MFES and T-score, compared with the FAC 0~2 group (p<0.05). The T-score was correlated with CRT and MFES scores (p<0.05). Conclusion: There is a positive relationship between physical performance and BMD. Therefore, improved physical performance can have a beneficial effect by reducing osteoporosis in elderly women, considering a positive relationship between physical performance and BMD.

• Journal of Sensor Science and Technology
• /
• v.9 no.4
• /
• pp.316-326
• /
• 2000

A new signal processing algorithm for white light interferometry has been proposed and investigated theoretically. The goal of the algorithm is to determine the absolute optical path length of an interferometer with very high precision (<< one optical wavelength). The algorithm features cross-correlation of interferometer fringe scans and hypothesis testing. The hypothesis test looks for a zero order fringe peak candidate about which the cross-correlation is symmetric minimizing the uncertainty of misidentification. The shot noise limited performance of the proposed signal processing algorithm has been analyzed using computer simulations. Simulation results were extrapolated to predict the misidentification rate at Signal to-Shot noise ratio (SNR) higher than 31 dB. Root-mean-square phase error between the computer-generated zero order fringe peak and the estimated zero order fringe peak has been calculated for the changes of three different parameters (SNR, fringe scan sampling rate, coherence length of light source). Results of computer simulations showed the ability of the proposed signal processing algorithm to identify the zero order fringe peak correctly. The proposed signal processing algorithm uses a software approach, which is potentially inexpensive, simple and fast.

• Journal of Biosystems Engineering
• /
• v.28 no.4
• /
• pp.305-314
• /
• 2003

The ROPS of an agricultural tractor is designed to protect its driver when the tractor overturns. Although the current OECD tests to determine whether the ROPS meets the requirements of the OECD regulation are desirable, they need long time to test. We experimental time and effort by using CAE. We conducted a finite element analysis for the ROPS design of a Dae-Dong tractor cabin in an attempt to reduce the design and manufacturing time. This study shows the interpretative skill using MARC(v.2000) for designing ROPS and difference between the results of testing and FEA. Design process is generally divided into two phases: a concept and a detail design. The concept design uses simple analysis to predict structural behavior, whereas the detail design involves a finite element analysis performed by the results of the concept design. This study focused on the detail design and used Patran(v.2000r2) and MARC(v.2000) of the MSC software corporation. The model consisted of 4812 elements and 4582 nodes. Four tests. specified in the OECD standards, were performed: (1) longitudinal loading test (2) rear crushing test (3) side loading test (4), and front crushing test. Independent analyses were also performed for each test, along with a sequential analysis. When compared, the results of the independent and sequential analyses were found to be similar to the test results.

• Journal of Biosystems Engineering
• /
• v.42 no.4
• /
• pp.251-257
• /
• 2017

Purpose: A chisel mounted on working implement, such as agricultural machinery used in irregular farming conditions, is subjected to highly variable fatigue loading during work. To ensure the safety of the chisel on a working implement for the duration of its service life, fatigue testing must be performed with the proper fatigue test load conditions. In this study, working loads for a chisel were developed by reconstructing loads from strain gage data collected during field tests and used to conduct fatigue tests on the chisel component. Methods: FE analysis with nCode software was utilized to select the proper quantity and locations of strain gages for load measurements. A fatigue test was performed to experimentally verify the fatigue strength of the chisel and to evaluate the validity of the load history developed with the load reconstruction technique. Results: A strain history for the chisel was obtained from data collected during field tests. The data was filtered for the 14-16 km/h speed range, connected, and merged. The chisel load history was developed using the load reconstruction technique. The resulting load history was expressed as a load spectrum using the rain-flow counting method. Conclusions: A fatigue test was conducted on a chisel under a constant load condition with an equivalent load amplitude and number of cycles, as calculated by Miner's Rule for linear damage accumulation. During the fatigue test, there were no cracks at any position. It is concluded that the fatigue test method proposed in this study can be utilized successfully as a durability evaluation method for the chisel.

• Journal of KIISE:Software and Applications
• /
• v.29 no.4
• /
• pp.225-234
• /
• 2002

The developers of mobile agent systems are considering integrating the system into the web and the developers of web servers are also considering supporting mobile agents in the future. But they are not clearly suggesting the relationship between web programming which has basically client/server architecture and mobile agent programming which is based on autonomous code mobility. In this paper, firstly, we clarify the method for integrating mobile agent programming into web programming by suggesting the model for mobile agent programming on the web. Secondly, by developing APIs for Java which is widely used for both web programming and mobile agent programming, we made it possible for programmers to use them for programming mobile agent on the web. Thirdly, we show the usefulness of the proposed model by adding and testing modules for execution environment of mobile agents on W3C's Java based web server, Jigsaw.

• Journal of Biomedical Engineering Research
• /
• v.16 no.4
• /
• pp.543-554
• /
• 1995

This paper describes the improvement of driving stability and the control system for INMEL-VII which is motorized manual wheelchair to satisfy requirements of the disabled The INMEL-VI was based on high maneuverability of the omnidirection drive and safety But the results of field tests about two years showed some problems to the disabled in daily life such as driving stability, Pm switching noise, and rotation of motor without driving command on negative slope. To solve the problems due to an increased DC motor power and applied to direct connection method in INMEL- VII. It improved the driving circuits and set switching frequency to 5KHz to eliminate the switching noise caused by PWM control of DC motor, As compare with the INMEL-VI, INMEL-VII is improved in driving stability by transfer the weight center to forward. The results of field testing proved the improvement of the driving stability and software algorithm It has been estimated to have a hlgh practical use for powered walking aids to the disabled's daily life.