• Physical Therapy Korea
• /
• v.19 no.1
• /
• pp.1-9
• /
• 2012

The purpose of this study was to investigate the kinematic and kinetic changes that may occur in the pelvic and spine regions during cross-legged sitting postures. Experiments were performed on sixteen healthy subjects. Data were collected while the subject sat in 4 different sitting postures for 5 seconds: uncrossed sitting with both feet on the floor (Posture A), sitting while placing his right knee on the left knee (Posture B), sitting by placing right ankle on left knee (Posture C), and sitting by placing right ankle over the left ankle (Posture D). The order of the sitting posture was random. The sagittal plane angles (pelvic tilt, lumbar A-P curve, thoracic A-P curve) and the frontal plane angles (pelvic obliquity, lumber lateral curves, thoracic lateral curves) were obtained using VICON system with 6 cameras and analyzed with Nexus software. The pressure on each buttock was measured using Tekscan. Repeated one-way analysis of variance (ANOVA) was used to compare the angle and pressure across the four postures. The Bonferroni's post hoc test was used to determine the differences between upright trunk sitting and cross-legged postures. In sagittal plane, cross-legged sitting postures showed significantly greater kyphotic curves in lumbar and thoracic spine when compared uncrossed sitting posture. Also, pelvic posterior tilting was greater in cross-legged postures. In frontal plane, only height of the right pelvic was significantly higher in Posture B than in Posture A. Finally, in Posture B, the pressure on the right buttock area was greater than Posture A and, in Posture C, the pressure on the left buttock area was greater than Posture A. However, all dependent variables in both planes did not demonstrate any significant difference among the three cross-legged postures (p>.05). The findings suggest that asymmetric changes in the pelvic and spine region secondary to the prolonged cross-legged sitting postures may cause lower back pain and deformities in the spine structures.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.3
• /
• pp.1293-1297
• /
• 2016

Cholangiocarcinoma (CCA) is a serious problem in Thailand, particularly in the northeastern and northern regions. Database of population at risk are need required for monitoring, surveillance, home health care, and home visit. Therefore, this study aimed to develop a geographic information system (GIS) database and Google map of the population at risk of CCA in Mueang Yang district, Nakhon Ratchasima province, northeastern Thailand during June to October 2015. Populations at risk were screened using the Korat CCA verbal screening test (KCVST). Software included Microsoft Excel, ArcGIS, and Google Maps. The secondary data included the point of villages, sub-district boundaries, district boundaries, point of hospital in Mueang Yang district, used for created the spatial databese. The populations at risk for CCA and opisthorchiasis were used to create an arttribute database. Data were tranfered to WGS84 UTM ZONE 48. After the conversion, all of the data were imported into Google Earth using online web pages www.earthpoint.us. Some 222 from a 4,800 population at risk for CCA constituted a high risk group. Geo-visual display available at following www.google.com/maps/d/u/0/edit?mid=zPxtcHv_iDLo.kvPpxl5mAs90&hl=th. Geo-visual display 5 layers including: layer 1, village location and number of the population at risk for CCA; layer 2, sub-district health promotion hospital in Mueang Yang district and number of opisthorchiasis; layer 3, sub-district district and the number of population at risk for CCA; layer 4, district hospital and the number of population at risk for CCA and number of opisthorchiasis; and layer 5, district and the number of population at risk for CCA and number of opisthorchiasis. This GIS database and Google map production process is suitable for further monitoring, surveillance, and home health care for CCA sufferers.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.11
• /
• pp.6715-6719
• /
• 2013

Objective: To explore the incidence, clinical characteristics, diagnosis and treatment strategies, prognosis of patients with malignancy-associated hypercalcemia (MAH). Methods: The data of 115 patients with MAH who were treated at the Medical Oncology Department of Chinese PLA General Hospital from Jan., 2001 to Dec., 2010 was retrospectively reviewed. Survival analysis was performed using the Kaplan-Meier method and the Cox proportional hazard model with statistic software SPSS 18.0. Results: The patients had blood calcium levels ranging from 2.77 to 4.87 mmol/L. Except for 9 cases who died or were discharged within 5 days after admission, all other patients recovered to normal blood calcium level after treatment with bisphosphonates or intravenous hydration and diuretics; their survival after occurrence of MAH was from 1 day to 4,051 days, and the median survival time was only 50 days. In the log-rank test, the male, renal metastasis, central nervous system symptoms and hypercalcemia occurring over 140 days after cancer diagnosis were predictors of poor survival (P=0.002, P=0.046, P=0.000, P=0.009). In the COX analysis, being male, central nervous system symptoms and hypercalcemia lasting over 140 days after cancer diagnosis were independent prognostic factors for survival time (RR=2.131, P=0.027; RR=3.054, P=0.002; RR=2.403, P=0.001). According to these factors, a score system was established to predict the patient prognosis and adjust the treatment. Conclusion: Cancer patients with MAH have an extremely poor median survival. Some independent factors indicate poor prognosis, including male gender, central nervous system symptoms and hypercalcemia lasting over 140 days after cancer diagnosis. The prognostic score can serve as a reference for MAH prognosis and treatment, worthy of further investigation.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.6
• /
• pp.353-357
• /
• 2005

Declining auditory performance with advanced age is a well known and common problem that is becoming more Prevalent due to the increasing number of elderly people in our society. We introduce a novel ARCISM (Audiogram Result Computer Input. Save & Management software) data management program which enables the assessment of the risk of past history of hearing impairment on the basis of known risk factors. This study investigates the reference levels of pure tone hearing threshold of normal aging in Korean and the difference between fenders. The subjects were carefully selected by questionnaire and absence of any history of otologic infection, noise exposure. and ototoxic drug among 1603 subjects. who visited Health Promotion Center in Daegu Fatima Hospital for one year. The results show (1) hearing sensitivity declines with age. (2) higher frequency shows steeper slope of hearing declines than lower frequency. and (3) there were more hearing loss at 4 and 8 kHz in men than in women. Due to the ARCISM program. it was possible to manage huge data of hearing results and to obtain the reference level of a9e-related hearing declines. Furthermore, we expect that the results of this study can be the fundamental data for hearing rehabilitation for the elderly and for developing suitable hearing aids for Korean.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.2
• /
• pp.21-28
• /
• 2012

The continuous deployment of Urban Traffic Information System (UTIS) in Korea has increased the need for developing more practical applications utilizing the standard functions of UTIS facilities installed on urban arterials beyond its basic applications like gathering traffic data and providing traffic information. The UTIS-based bus signal priority may be one of UTIS-based applications meeting such demands. However, the studies on BSP have not been sufficient for actual field deployment in terms of theories and algorithms so that there have been few actual installations on real urban arterials. Thus, this study was aimed at developing a UTIS-based bus priority signal system and evaluating its effectiveness through a field study. To this end, this study presents the system development processes by dividing the UTIS-based bus priority signal system into hardware and software. In addition, the positive effectiveness of the UTIS-based bus priority signal system was verified through a field application test which was conducted at Gyeonggi Global Trade High School intersection.

• Applied Chemistry for Engineering
• /
• v.31 no.4
• /
• pp.377-382
• /
• 2020

A sequential design of experiments was employed to optimize MOF-235 synthesis for acetylene adsorption process. Two experimental designs were applied: a two-level factorial design for screening and a central composite design, one of response surface methodologies (RSM). In this study, 2³ factorial design of experiment was used to evaluate the effect of parameters of synthesis temperature and time, and also mixing speed on crystallinity of MOF-235. Experiments were conducted 16 times follwing MINITAB 19 design software for MOF-235 synthesis. Half-normal, pareto, residual, main and interaction effects were drawn based on the XRD results. The analysis of variance (ANOVA) of test results depicts that the synthesis temperature and time have significant effects on the crystallinity of MOF-235 (response variable). After screening, a central composite design was performed to optimize the acetylene adsorption capacity of MOF-235 based on synthesis conditions. From nine runs designed by MINITAB 19, the result was calculated using the second order model equation. It was estimated that the maximum adsorption capacity (18.7 mmol/g) was observed for MOF-235 synthesized at optimum conditions of 86.3 ℃ and 28.7 h.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.24 no.2
• /
• pp.107-111
• /
• 2013

Objectives : We developed two-dimensional (2D) scanning videokyomography to evaluate the mucosal wave of whole vocal cords in real time to overcome the limit of preexisting stroboscopy and line scanning videokymography which could not evaluate it. Methods : We implemented a continuous light source with high brightness, a high-definition CMOS camera, and capture board for saving the data. We created the software program to analyze the image data from the system. The test of the functionality of the 2D scanning videokymography camera was performed in one of the authors (P.H.J 32 years old male). Vocal cord images were obtained during normal phonation and falsetto phonation. Images were obtained also during cough, diplophonia. Results : The system made it possible to measure objective parameters, including fundamental frequency, amplitude, regularity, mucosal wave, and phase difference, medial and lateral peak, opening versus closing duration related to vocal fold vibration. Simultaneously, it enabled analysis of the whole mucosal wave of the entire vocal fold in real time. 2D scanning videokymography was also effective for evaluating the dynamic status of the vocal fold when the subject phonated aperiodic voice. Conclusion : In conclusion, 2D scanning videokymography can support the analysis of the whole mucosal wave of the entire vocal cord with objective vocal parameters, overcoming the limitations of stroboscopy and previous line scanning videokymography techniques.

• Tunnel and Underground Space
• /
• v.30 no.5
• /
• pp.473-483
• /
• 2020

This paper examines the vertical stress change concentrated on mine pillar which occurs due to the stress disturbance from opening excavation at room and pillar mine by FLAC3D, a finite difference method (FDM) software. The mesh size combination is decided with a careful consideration of relative error and run-time, then its performance is verified. A series of numerical analyses is conducted and the vertical stress at central pillar was observed for the test cases of 1×1 to 11×11 mine pillars, 40 m to 320 m depth with 40 m difference. The results show that the vertical stress of pillar approaches to the similar value with the value estimated by tributary area theory(TAT) when the development area (N_P) is increased or the height of overburden (H_OB) is decreased, while it is overestimated in the opposite case. Furthermore, it also represents that the vertical stress factor (VSF) converges to a specific value when the depth is increased whille keeping the development area identical.

• Korean Journal of Soil Science and Fertilizer
• /
• v.41 no.4
• /
• pp.235-238
• /
• 2008

The Water Erosion Prediction Project (WEPP) was initiated in August 1985 to develop new generation water erosion prediction technology for federal agencies involved in soil and water conservation and environmental planning and assessment. Developed by USDA-ARS as a replacement for empirical erosion prediction technologies, the WEPP model simulates many of the physical processes important in soil erosion, including infiltration, runoff, raindrop detachment, flow detachment, sediment transport, deposition, plant growth and residue decomposition. The WEPP included an extensive field experimental program conducted on cropland, rangeland, and disturbed forest sites to obtain data required to parameterize and test the model. A large team effort at numerous research locations, ARS laboratories, and cooperating land-grant universities was needed to develop this state-of-the-art simulation model. The WEPP model is used for hillslope applications or on small watersheds. Because it is physically based, the model has been successfully used in the evaluation of important natural resources issues throughout the United State and in several other countries. Recent model enhancements include a graphical Windows interface and integration of WEPP with GIS software. A combined wind and water erosion prediction system with easily accessible databases and a common interface is planned for the future.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.5
• /
• pp.49-58
• /
• 2010

The traffic signal controllers being used in the domestic currently are being manufactured based on the korean national police standard which was developed for controlling the quad-light traffic signal having the red, yellow, left-turn arrow, and green lights. But according to the national policy for the traffic operation, they have to be changed to be able to switch the tri-light signal having red, yellow and green lights. In this study, a new tri-light traffic signal controller was designed and developed by the way improving the Signal Control Unit of the existing quad-light standard traffic controller. The Load Signal Unit(LSU) was improved to output 6 signals which are the two assemblies of three signal indications having the red, yellow, and green lights. To enough traffic signals output to control each directional movements and the various transport modes which are car, bus, bike, and pedestrian etc., the connector bus system was designed to be able to accommodate maximum 96 signals outputs being constructed by 16 LSUs. Flasher device was developed to be able to support maximum 32 red signals. In the software, the communication protocol between traffic control center and the traffic signal controller was improved and new signal map code values were defined for the developed LSU controlling the quad-light traffic signal. A model of the quad-light traffic signal controller developed and was tested three operations, protocol-operation, remote-command and control-mode. The test result operated all of them successfully.