• 제목/요약/키워드: softening effect

검색결과 391건 처리시간 0.027초

AH36-TMCP강의 용접후열처리 효과에 관한 연구 (A Study on Effect of PWHT in AH36-TMCP Steel)

  • 유효선;장원상;안병국;정세희
    • Journal of Welding and Joining
    • /
    • 제16권6호
    • /
    • pp.44-51
    • /
    • 1998
  • It is well known that the fine bainitic microstructure obtained by TMCP(thermo-mechanical control process) secures the high toughness of base metal. Besides, TMCP steel is very suitable for high heat input in welding as it has low carbon equivalent. In HAZ, however, the accelerated cooling effect imparted on the matrix by the weld thermal cycles is relieved and thus the weldment of TMCP steel has softening zone which shows low fracture toughness compared with base metal. Therefore, PHWT of weldment is carried out to improve the fracture toughness in weldment of TMCP steel which has softening zone. In this study, the effects of PWHT on the weldment of AH36-TMCP steel are investigated by the small punch (SP) test. From the several results such as SP energy and displacement at room temperature, the behavior of transition curves, the fracture strength at -196$^{\circ}C$, distribution of (DBTT)sp and (DBTT)sp, the PWHT condition of A.C. after 85$0^{\circ}C$-1 sec W.C. was suitable condition for recovering a softening zone of HAZ as welded.

  • PDF

영구 연화 거동을 고려한 마찰교반용접(FSW) 된 DP강 판재의 탄성 복원 예측 (Springback prediction of friction stir welded DP590 steel sheets considering permanent softening behavior)

  • 박태준;이원오;정경환;김준형;김대용;;;;정관수
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 2008년도 추계학술대회 논문집
    • /
    • pp.304-307
    • /
    • 2008
  • In order to evaluate the effect of permanent softening behavior on springback prediction, 2D-draw bending simulations were compared with experiments for friction stir welded DP590 steel sheets. To account fur the nonlinear hardening behavior, the combined isotropic-kinematic hardening law was utilized with and without considering the permanent softening behavior during reverse loading. Also, the non-quadratic orthotropic yield function, Yld2000-2d, was used to describe the anisotropic initial-yielding behavior of the base sheet while anisotropic properties of the weld zone were ignored for simplicity.

  • PDF

가속냉각형 TMCP강재 대입열 용접부의 피로특성 (A Study on the Fatigue Characteristics of Accelerated Cooled TMCP Steel's Welded Joint with High Heat Input)

  • 윤중근;김희진
    • Journal of Welding and Joining
    • /
    • 제6권1호
    • /
    • pp.28-34
    • /
    • 1988
  • The fatigue test was carried out to evaluate the fatigue characteristics of the accelerated cooled (ACC) TMCP steel and its welded joint. From this study, it was confirmed that ACC TMCP steel has higher fatigue strength than conventional steels. After welding, however, the fatigue strength of ACC TMCP steel was deteriorated associated with HAZ softening when weld reinforcement was removed. On the other hand, with weld reinforcement, there is no effect of HAZ softening on the fatigue strength of welded joint because it is strongly dependant on the detail weld geometry i.e., stress concentration factor. Accordingly the fatigue strength of actual welded joint increases with decreasing the stress concentration factor of welded joint, regardless of HAZ softening.

  • PDF

Numerical simulations of localization of deformation in quasi-brittle materials within non-local softening plasticity

  • Bobinski, J.;Tejchman, J.
    • Computers and Concrete
    • /
    • 제1권4호
    • /
    • pp.433-455
    • /
    • 2004
  • The paper presents results of FE-calculations on shear localizations in quasi-brittle materials during both an uniaxial plane strain compression and uniaxial plane strain extension. An elasto-plastic model with a linear Drucker-Prager type criterion using isotropic hardening and softening and non-associated flow rule was used. A non-local extension was applied in a softening regime to capture realistically shear localization and to obtain a well-posed boundary value problem. A characteristic length was incorporated via a weighting function. Attention was focused on the effect of mesh size, mesh alignment, non-local parameter and imperfections on the thickness and inclination of shear localization. Different methods to calculate plastic strain rates were carefully discussed.

초고강도 강섬유 보강 콘크리트의 인장연화거동에 대한 크기효과 (Size Effect for Tension Softening Behavior of Ultra-Strength Steel Fiber Reinforcement Concrete)

  • 이시영;홍기남;김성욱;박정준;한상훈
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
    • /
    • pp.861-864
    • /
    • 2008
  • This study was performanced to investigate the fractural and fatigue behavior of ultra-strength steel fiber reinforcement concrete. The tension softening diagram can describe the post-cracking behavior of concrete in tension. In this paper, Three points bending tests with a notch have been carried out to investigate tensile properties of the steel fiber reinforced concrete(SFRC) according to variation of the height. Poly-linear approximation method combined with FEM analysis is applied to the steel fiber reinforced concrete to determine the tension softening diagrams and also to certify the validity of the method. The simulated load-CMOD curves using the determined softening diagrams though the poly-linear approximation method completely agree with the measured ones.

  • PDF

Fracture energy and tension softening relation for nano-modified concrete

  • Murthy, A. Ramachandra;Ganesh, P.;Kumar, S. Sundar;Iyer, Nagesh R.
    • Structural Engineering and Mechanics
    • /
    • 제54권6호
    • /
    • pp.1201-1216
    • /
    • 2015
  • This paper presents the details of size independent fracture energy and bi-linear tension softening relation for nano modified high strength concrete. Nano silica in powder form has been used as partial replacement of cement by 2 wt%. Two popular methods, namely, simplified boundary effect method of Karihaloo et al. (2003) and RILEM (1985) fracture energy with P-${\delta}$ tail correction have been employed for estimation of size independent fracture energy for nano modified high strength concrete (compressive strength ranges from 55 MPa to 72 MPa). It is found that both the methods gave nearly same values, which is an additional evidence that either of them can be employed for determination of size independent fracture energy. Bi-linear tension softening relation corresponding to their size independent fracture energy has been constructed in an inverse manner based on the concept of non-linear hinge from the load-crack mouth opening plots of notched three-point bend beams.

프릿트 첨가에 따른 저온소성 기판과 Cu와의 접합 거동에 관한 연구 (The Effect of Frit on Bonding Behavior of Low-firing-substate and Cu Conductor)

  • 박정현;이상진
    • 한국세라믹학회지
    • /
    • 제32권5호
    • /
    • pp.601-607
    • /
    • 1995
  • The bond strength between the low-firing-substrate and Cu conductor depended on the softening point and the amount of frit added to the metal paste. The addition of 3 wt% frit (softening point: 68$0^{\circ}C$) to the metal paste resulted in the improvement of bond strength, which was approximately 3 times higher (3kg/$\textrm{mm}^2$) than that of non frit condition. It was also found that fracture surface shifted to the ceramic substrate in the interface region. These phenomena were attributed to the frit migration into the metal-ceramic interface. It was thought that the migration of glass frit occurred extensively when the softening point of glass firt was 68$0^{\circ}C$. The sheet resistance of Cu conductor remained constant by the addition of 4 wt% frit regardless of softening point of frit. For all samples with more than 4 wt% frit, the sheet resistance increased abruptly.

  • PDF

고온단속변형량이 단상 Cu-Zn합금의 정적연화에 미치는 영향 (Effect of Hot Interrupted strain on Static Softening of Single Phase Cu-Zn Alloy)

  • 권용환;조상현;유연철
    • 소성∙가공
    • /
    • 제4권2호
    • /
    • pp.169-179
    • /
    • 1995
  • Static restoration mechanism during hot interrupted deformation of Cu-Zn alloy was studied in the temperature range from $550^{\circ}C$ to $750^{\circ}C$ and at a constant strain rate of 0.1/sec. At a given temperature, the hot interrupted deformations were performed with variation of interrupted time $t_i$ form 1 to 50 sec and of interrupted strain ${\varepsilon}_i$ from 0.15 to 0.90. From the analysis of the values of the critical strain of ${\varepsilon}_c$ for tje initiation of dynamic recrystallization and the peak strain of${\varepsilon}_p$, the relationship ${\varepsilon}_c{\fallingdotseq}0.7{\varepsilon}_p$ was obtained. It was clarified that the softening of the interrupted deformation was mainly the static recrystallization and the fractional softening(FS) which was over 30% mostly confirmed this result. The fractional softening of the interrupted time $t_i$ especially and pre-strain. The FS increased with increasing strain rate, interrupted time and pre-strain. The change of microstructures after hot deformation could be predicted by the FS. when the FS was 30~100%, static recrystallization was happened and grain growth was observed at the condition which was $750^{\circ}C$ deformation temperature, 0.45 prestrain and this condition's FS value was over 100%.

  • PDF

토목섬유 interface의 변형율 연화 모델 개발 (Development of Strain-softening Modeling for Interfaces between Geosynthetics)

  • 서민우;박준범;박인준;조남준
    • 한국지반신소재학회논문집
    • /
    • 제2권1호
    • /
    • pp.57-68
    • /
    • 2003
  • Strain-softening model is developed to characterize the interface behavior of geomembrane with geotextile and geosynthetic clay liner(GCL). The model proposed in this research is calibrated by using data from direct shear tests conducted on smooth and textured geomembrane. The research is divided into two regions, pre-peak and post-peak, to take into account of strain-softening effect. Although slight difference between measured and back calculated data is observed under high normal stress, good agreements, in general, are found from back calculations. Especially, good consistency is observed in the case of low normal stress. Based on the results, it can be concluded that the proposed model can be a reasonable constitutive law to figure out the behavior of strain-softening between interfaces of geomembrane. In addition, DSC(Disturbed State Concept) model is also presented for further application in geosynthetic interfaces.

  • PDF

둥굴레 종자의 발아(發芽) 및 소주아(小珠芽) 형성(形成)에 대한 저온(低溫)과 종피연화(種皮軟化) 처리(處理)의 영향(影響) (Effects of Seed-coat Softening and Prechilling on Seed Germination and Bulbil Formation of Polygonatum odoratum Druce)

  • 강진호;김동일;배기수;장계현;심재석
    • 한국약용작물학회지
    • /
    • 제6권3호
    • /
    • pp.210-215
    • /
    • 1998
  • 저온과 종피연화의 처리방법을 설정하여 둥굴레 종자를 이용한 다량육묘에 필요한 정보를 제공하고자 저온처리기간 (4, 8, 12, 16주), 종피연화(10% KOH, 40분)와 저온의 혼용(混用) 처리방법(處理方法)이 발아(發芽), 소주아(小珠芽) 형성(形成) 및 발아개체 등에 미치는 영향을 조사하였던 바 그 결과를 요약하면 다음과 같다. 1. 발아률(發芽率)과 소주아(小珠芽) 형성률(形成率)은 저온만 처리할 경우 $8{\sim}12$주가 적정 기간으로 판단되었으나 종피연화와 혼용처리(混用處理)할 경우 저온처리기간을 8주 이내로 대폭 단축할 수 있는 것으로 나타났다. 2. 둥굴레 종자의 발아는 종피연화와 저온을 각각 단용처리(單用處理)하는 것보다는 이들의 혼용처리(混用處理)에서 향상되었으며 종피연화처리 효과보다는 저온처리의 효과가 큰 것으로 분석되었다. 3. 발아(發芽) 및 소주아(小珠芽) 형성률(形成率)은 종피연화 처리를 저온 처리 후에 실시하는 것보다는 전에 실시하는 것에서 양호하였고, 근수(根數)에서도 이와 유사한 경향을 보였다.

  • PDF