• 제목/요약/키워드: soft-decision

검색결과 290건 처리시간 0.025초

Soft Magnetic Back Iron의 개선을 통한 servo driver 출력 향상을 위한 연구 (A study for the output power improvement DC servo driver to make remodeling back iron)

  • 최도순
    • 한국산업정보학회:학술대회논문집
    • /
    • 한국산업정보학회 1999년도 추계공동학술대회 논문집:21세기지식경영과 정보기술
    • /
    • pp.693-700
    • /
    • 1999
  • The Servo motor is consistent with the magnet rotor, winding, magnetic back iron and the sensor. Especially the soft magnetic back iron in the servo motor, which consists of the magnet rotor and winding, and between these two components lies the magnetic circle. Its important to monitor the output power of to make conclusive decision for designs. In these days main household electrical appliances, business machinery and tools are made by process of miniaturization. Because of this miniaturization in hardware, miniaturization of the servo motor is essential But the decrease inside affects the power output. For improve of these has been several attempt at improving the power output of these smaller servo motors. There has been experiment in the servo motor composition, composing of the improvement of the soft magnetic back iron through comparison of the out put power plans are being made.

  • PDF

Cooperative Spectrum Sensing for Cognitive Radio Networks with Limited Reporting

  • So, Jaewoo
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제9권8호
    • /
    • pp.2755-2773
    • /
    • 2015
  • Cooperative spectrum sensing increases the detection performance in a cognitive radio network, based on the number of sensing nodes. However, as the number of sensing nodes increases, the reporting overhead linearly increases. This paper proposes two kinds of cooperative spectrum sensing with limited reporting in a centralized cognitive radio network, a soft combination with threshold-based reporting (SC-TR) and a soft combination with contention-based reporting (SC-CR). In the proposed SC-TR scheme, each sensing node reports its sensing result to the fusion center through its own reporting channel only if the observed energy value is higher than a decision threshold. In the proposed SC-CR scheme, sensing nodes compete to report their sensing results via shared reporting channels. The simulation results show that the proposed schemes significantly reduce the reporting overhead without sacrificing the detection performance too much.

APSK 변조 방식에 대한 연판정 출력의 스케일링을 통한 성능 개선 (Performance Enhancement by Scaling Soft Bit Information of APSK)

  • 장매향;김수영
    • 한국통신학회논문지
    • /
    • 제38C권10호
    • /
    • pp.858-866
    • /
    • 2013
  • 차세대 위성방송 규격으로 정의되어 있는 DVB-S2에서는 멀티레벨 위상변조 방식이라고 할 수 있는 APSK 변조 방식과 연판정 정보를 필요로 하는 LDPC 부호화 방식을 채택하고 있다. 따라서, 수신단의 APSK 복조기에서는 비트 당 연판정 값을 계산할 수 있는 기능이 있어야 한다. 본 논문에서는 DVB-S2 시스템에서 사용되는 고차원 APSK변조 신호에 대하여 비트 당 간단한 거리 계산 수준의 복잡도로 연판정 비트를 계산할 수 있는 방법을 소개하고 이 경우 연판정 비트 값이 지나치게 낙관적으로 계산된다는 분석 결과를 보인다. 이와 같이 지나치게 낙관적으로 계산된 연판정 값은 결국 복호 성능 저하의 가장 큰 원인이 된다. 이러한 단점을 극복하기 위한 방법으로써 연판정 출력의 스케일링 기법을 제안하고, 이와 같은 스케일링 기법을 적용하면 선형 복잡도로 연판정 비트값을 계산할 수 있고, 최우 검출기법에 근접하는 성능을 얻을 수 있음을 보인다.

Effects of soft occlusal appliance therapy for patients with masticatory muscle pain

  • Kashiwagi, Kosuke;Noguchi, Tomoyasu;Fukuda, Kenichi
    • Journal of Dental Anesthesia and Pain Medicine
    • /
    • 제21권1호
    • /
    • pp.71-80
    • /
    • 2021
  • Background: The options for stabilization appliance therapy for masticatory muscle pain include soft occlusal and hard stabilization appliances. A previous study suggested that hard stabilization appliance therapy was effective for patients with local myalgia who developed long facets on their occlusal appliances. The objective of this study was to identify patients in whom a soft occlusal appliance should be used to treat masticatory muscle pain by analyzing the type of muscle pain present and patient factors that influenced the effectiveness of this treatment. Methods: The study included 42 patients diagnosed with local myalgia or myofascial pain according to the Diagnostic Criteria for Temporomandibular Disorders Diagnostic Decision Tree. The analysis of patient factors included variables believed to be associated with temporomandibular disorders. First, a temporary screening appliance was used for 2 weeks to assess each patient for bruxism during sleep. Soft appliance therapy was then started. For each patient, the effectiveness of the appliance was evaluated according to the intensity of tenderness during muscle palpation and the treatment satisfaction score at one month after starting treatment. Results: Data from 37 of the 42 patients were available for analysis. Twenty-five patients reported satisfaction with the appliance. In logistic regression analysis, the odds ratio for reduction of facet length was 1.998. Nineteen patients showed at least a 30% improvement in the visual analog scale score. The odds ratio for local myalgia was 18.148. Conclusion: Soft appliance therapy may be used in patients with local myalgia. Moreover, patients who develop short facets on the appliance surface are likely to be satisfied with soft appliance therapy. Soft appliance therapy may be appropriate for patients with local myalgia who develop short facets on their occlusal appliance.

교대 기초말뚝의 측방유동 판정식에 관한 신뢰성 해석 (Reliability Analysis on the Decision Method of Lateral Flow of Foundation Piles for Abutment)

  • 안종필;김규덕;김일구;최진호
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2008년도 추계 학술발표회
    • /
    • pp.1090-1097
    • /
    • 2008
  • This study conducted the decision method of lateral flow in abutment structures founded on the soft soils and the reliability analysis on the foundation pile for abutment. On the basis of the results, this study proposed the reliability design model. Reliability analysis was conducted by applying second moment method, point estimation method, and expected total cost minimization to lateral movement index, lateral movement decision index, modified lateral movement decision index, and circular failure safety factor for the decision criteria of lateral flow. The reliability index by analysis method had a similar tendency each other. Point estimation method was found as a practical method in the aspect of convenience because it could conduct the analysis only by mean and standard deviation as well as the partial derivative on random variables was not necessary. Optimum reliability index and optimum safety according to increasing in failure factors and load ratio were analyzed and loads and resistance factors of the design criteria of optimum reliability were estimated. It presented rational design model which can consider construction level and stability and economical efficiency overall.

  • PDF

MTLMS 기반의 결정귀환 등화기의 설계 (Design of MTLMS based Decision Feedback Equalizer)

  • 최윤석;박형근
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2006년도 춘계종합학술대회
    • /
    • pp.950-953
    • /
    • 2006
  • 다음은 요약문 입이동 멀티미디어 통신에서의 주요한 요소기술 중의 하나는 높은 품질의 서비스를 제공할 수 있는 광대역 전송기술이다. 이와 같은 광대역 이동통신시스템을 위해서는 높은 주파수 효율과 낮은 전력소모를 가지면서 시변 다중경로 페이딩 채널에 의한 신호왜곡을 극복해야 한다. 따라서 단일 반송파의 짧은 버스트 데이터전송을 위한 적응적 결정귀환 등화방식이 하나의 해결책으로 고려되고 있다. 본 논문에서는 짧은 훈련심볼을 포함한 버스트 신호 갖는 시스템의 성능향상을 위하여 연판정 귀환을 갖는 MTLMS (multiple-training least mean square) 기반의 DFE(decision feedback equalizer)를 제안하고 시뮬레이션을 통하여 다른 등화방식과의 성능을 비교 분석하였다.

  • PDF

Inter-Process Correlation Model based Hybrid Framework for Fault Diagnosis in Wireless Sensor Networks

  • Zafar, Amna;Akbar, Ali Hammad;Akram, Beenish Ayesha
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제13권2호
    • /
    • pp.536-564
    • /
    • 2019
  • Soft faults are inherent in wireless sensor networks (WSNs) due to external and internal errors. The failure of processes in a protocol stack are caused by errors on various layers. In this work, impact of errors and channel misbehavior on process execution is investigated to provide an error classification mechanism. Considering implementation of WSN protocol stack, inter-process correlations of stacked and peer layer processes are modeled. The proposed model is realized through local and global decision trees for fault diagnosis. A hybrid framework is proposed to implement local decision tree on sensor nodes and global decision tree on diagnostic cluster head. Local decision tree is employed to diagnose critical failures due to errors in stacked processes at node level. Global decision tree, diagnoses critical failures due to errors in peer layer processes at network level. The proposed model has been analyzed using fault tree analysis. The framework implementation has been done in Castalia. Simulation results validate the inter-process correlation model-based fault diagnosis. The hybrid framework distributes processing load on sensor nodes and diagnostic cluster head in a decentralized way, reducing communication overhead.

DVB-RCS NG시스템에서 Shortened TPC 알고리즘 적용 방안에 관한 연구 (A Study on Application of Shortened TPC Algorithm for DVB-RCS NG Systems)

  • 임병수;김민혁;박태두;정지원
    • 한국통신학회논문지
    • /
    • 제36권11C호
    • /
    • pp.712-719
    • /
    • 2011
  • 본 논문에서는 DVB-RCS NG 규격에서 제시되고 있는 연판정 e-BCH 부호를 반복복호기반의 e-BCH 복호방법에 대한 성능을 분석하였다. 그러나 선형 변조와 결합한 e-BCH 부호화 방식은 성능 분석 결과 반복에 대한 성능의 차이가 보이지 않아 본 논문에서는 가로 세로 부호화 과정을 하는 TPC 부호화 기법을 응용하여 적용하였다. DVB-NG 규격에서는 다양한 부호화율을 제시하므로 본 논문에서는 가로와 세로의 부호화 과정에서 zero padding 하여, 부호화 후 단축 시키는 방식으로 rate-compatible 한 TPC 방식을 제안하며, 선형 변조에서 반복에 의한 효과가 나타나 e-BCH 보다 성능이 향상됨을 알 수 있다.

이산분포 HMM을 이용한 음성인식에서의 코드워드 Tying 알고리즘 (A Codeword Tying Algorithm in Speech Recognition based on Discrete Hidden Markov Model)

  • 김도영;김남수;은종관
    • 한국음향학회지
    • /
    • 제13권3호
    • /
    • pp.63-70
    • /
    • 1994
  • 본 논문에서는 수형구조 분류기를 이 용한 코드워드 tying 알고리즘을 제안한다. 코드워드와 상태간의 통계적 특성을 이용한 일종의 soft decision 방식이라고도 볼 수 있는 제안된 알고리즘은 빠른 트리 구성과 유일한 최적의 해를 제공하는 특징이 있다. 또한, 이산분포 hidden Markov model(HMM)을 이용한 인식 시스템에 쉽게 적용이 가능하다는 장점을 가진다. 제안된 알고리즘의 성능 평가를 위한 화자독립 격리단어 인식실험에서 코드북 크기가 256과 512일 경우에 대해 각각 $6\%$, $9\%$의 오차를 감소시켰으며, HMM 파라미터도 $20\%$ 정도 줄임을 확인하였다.

  • PDF

IMT-2000용 비터비 복호기의 효율적인 설계 (Design of Viterbi Decoder for IMT-2000)

  • 정인택;송상섭
    • 한국정보통신학회논문지
    • /
    • 제5권1호
    • /
    • pp.67-72
    • /
    • 2001
  • 기존 IS-95 시스템과 달리 IMT-2000 시스템에서 사용되는 길쌈부호는 다양한 부호율을 가지며, 데이터 전송속도(최대 384 kbps) 또한 다양하다. 그리고 채널 부호화된 심볼들은 심볼율을 정합하기 위하여 최대 8번 반복하여 전송된다. 이로 인해 IMT-2000 시스템은 IS-95 시스템에 비해 데이터율이 최대 40배, 입력 버퍼가 80배 증가하게 된다. 이러한 하드웨어의 복잡도를 줄이기 위해 IS-95 시스템에서 채용된 비티비 복호기의 4비트 연성판정을 대치한 수 있는 3비트 연성판정이 필요하다. 이에 대해, 본 논문에서는 IMT-2000 시스템에 적용할 수 있으며, 4비트 연성판정 비터비 복호기를 대체할 수 있는 3비트 연성판정 비터비 복호기 구조를 제시하며, 심볼 반복율에 따라 증가된 심볼 표현을 위한 비트수를 3비트로 표현할 수 있는 새로운 SMT(Symbol Metric Table)를 생성한다.

  • PDF