• Journal of information and communication convergence engineering
• /
• v.12 no.1
• /
• pp.46-52
• /
• 2014

This article presents key research needs in three-dimensional integrated circuit (3D IC) architectural floorplanning. Architectural floorplaning is done at a very early stage of 3D IC design process, where the goal is to quickly evaluate architectural designs described in register-transfer level (RTL) in terms of power, performance, and reliability. This evaluation is then fed back to architects for further improvement and/or modifications needed to meet the target constraints. We discuss the details of the following research needs in this article: block-level modeling, through-silicon-via (TSV) insertion and management, and chip/package co-evaluation. The goal of block-level modeling is to obtain physical, power, performance, and reliability information of architectural blocks. We then assemble the blocks into multiple tiers while connecting them using TSVs that are placed in between hard IPs and inside soft IPs. Once a full-stack 3D floorplanning is obtained, we evaluate it so that the feedback is provided back to architects.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.653-656
• /
• 2006

It is necessary for the new material and construction concept to make up for weak point which related to high durability and finish ability to solve exposure limit of exist construction method. This paper is deal with performance test(tier load, anti abrasion, anti impact, permeability, bond test) compositive using for water reacting soft urethane and rigid urethane to improve the exist problem which are crack movement, adhesive on the wet surface, impact and abrasion by tier load. It is getting decreasing demage compare with other exist materials after test by transfer load, movement and impact.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.1320-1325
• /
• 2006

When the train running on the high-speed track, there is a speed band which track distortion is unusually increased according to the condition of track and roadbed. This speed is called critical velocity and physical parameter values are increased greatly. These phenomenon happened as high-speed train were developed, studied regularly through TGV 100 running test in France. As research result until now, the main reason is soft roadbed's bearing capacity. Wave propagation and track support capacity is varied by the ground characteristics. This paper achieved theoretical examination about resonance band(speed and frequency) that occurred in roadbed on the base rock in point of geotechnical engineering. The examination of resonance divides with ground response analysis, critical band analysis by the shear wave velocity of roadbed and train critical speed through the ground stratum.

• Archives of Craniofacial Surgery
• /
• v.19 no.2
• /
• pp.131-134
• /
• 2018

Treacher Collins syndrome is a congenital disorder that is characterized with a wide range of cranio-facial deformities. Zygomatic hypoplasia or aplasia is one of the key features, and surgical reconstruction of the consequent depression on the zygomatic area is deemed necessary by many patients. Various surgical options are available-injectables, alloplastic materials, autologous grafting, and autogenous tissue transfer. It depends on each patient which technique to use. Here, we present a clinical case, in which bilateral free groin flaps were adopted in attempt to resolve the remnant aesthetic deformity associated with zygomatic depression, despite a series of previous surgical efforts, in a 25-year-old Treacher Collins syndrome male patient.

• Archives of Reconstructive Microsurgery
• /
• v.19 no.1
• /
• pp.68-79
• /
• 2010

Lower abdominal tissue is regarded as an ideal donor site for the breast reconstruction because it provides large skin territory and huge amount of soft tissues enough to the breast size. However it is not easy for the surgeon to reconstruct the really natural breast, and needs the learning curve with long time experience. Author represent the various reconstruction procedures for the breast using lower abdominal tissue such as muscle sparing free TRAM, DIEP, and SIEA free flaps to reinsure like breast. Indications, and selection of reconstructive methods, surgical timing, selection of donor sites and recipient vessel of these flaps were reviewed. In addition, detailed procedures, surgical tips and secondary adjuvant procedures are described for more symmetry of reconstructed breast. The muscle sparing free TRAM, DIEP, and SIEA free flaps would be enough to provide supple, huge amount of well vascularized tissue for the breast, if these flaps were selected for the appropriate indication according to patient's general condition, obesity, the opposite breast and abdominal tissue condition. Lower abdominal tissue was able to provide versatile designs with sufficient adipose tissue without compromising the integrity of abdominal wall.

• Journal of Korean Foot and Ankle Society
• /
• v.4 no.1
• /
• pp.23-29
• /
• 2000

Acquired Hallux varus is defined radiographically by a negative metatarsophalangeal angle and clinically by adduction of the hallux on the first metatarsal and most commonly occurs after hallux valgus surgery. It's the prevalence has ranged from 2% to 17%. We report a case of hallux varus resulted from weakening of support of lateral soft tissue and resection of an excessive amount of the metatarsal head during a bunionectomy after initial correction of hallux valgus. We corrected the hallux varus deformity using transfer of extensor hallucis brevis tendon with reconstruction os lateral capsule.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2003.11a
• /
• pp.50-55
• /
• 2003

Tribological testing of DLC films was conducted using a rotating type ball on a disk friction tester in a dry chamber. This study made use of four kinds of mating balls that were made with stainless steel but subjected to diverse annealing conditions in order to achieve different levels of hardness. In all load conditions using martensite mating balls, the test results demonstrated that the friction coefficient was lower when the mating materials were harder. The high friction coefficient found in soft martensite balls appeared to be caused by the larger contact areas. The wear track on the mating balls indicated that a certain amount of material transfer occurs from the DLC film to the mating ball during the high friction process. Raman Spectra analysis showed that the transferred materials were a kind of graphite and that the contact surface of the DLC film seemed to undergo a phase transition from carbon to graphite during the high friction process.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.560-560
• /
• 2012

We report a one-step fabrication method of Poly(9,9-dioctylfluorene) (PFO) nanowire array with pronounced ${\beta}$-Phase. We use liquid-bridge-mediated nanotransfer molding (LB-nTM) which is a new direct nano-patterning method based on the direct transfer of various materials from a mold to a substrate via liquid layer. The formation of the ${\beta}$-phase morphology in the resulting PFO nanowire array was evidenced by the presence of an absorption peak at 435nm. With the collection polarizer oriented parallel to the wire long axis, the PL emission was most intense and an emission dichroic ratio, DRE, of 3.7 was determined. The nanowire array have been investigated by scanning electron microscopy (SEM). Also, we simply fabricated structure of device of ITO/PFO nanowire arrays/Al and the electroluminescence spectra were recorded at various applied voltage.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.474-476
• /
• 1999

This paper presents the vector control of induction motor for traction drives. Especially, the PWM mode control method is well described to be selected as the change of speed to meet the wide speed range of the traction motor. Asynchronous space vector PWM mode and synchronous one pulse mode are basically used under the full speed range with the overmodulation PWM mode for the soft transfer between them. The validity of this proposed control scheme is verified with the simulation results.

• Information and Communications Magazine
• /
• v.24 no.12
• /
• pp.14-21
• /
• 2007

This paper aims to improve the design of iterative detection and decoding(IDD) based on the soft interference cancellation with minimum mean squared error(SC-MMSE) detector, which shows low performance compared to the maximum a posteriori(MAP) detector. By means of extrinsic information transfer(EXIT) chart analysis, such low performance may be attributed to that the "pure"(original) turbo principle is not always best for IDD. Thus, we propose a new IDD architecture based on the SC-MMSE detector which uses new a priori information. Simulation results show that the performance of the proposed IDD is very close to that of IDD based on the MAP detector.