• Journal of the Korean Applied Science and Technology
• /
• v.32 no.3
• /
• pp.512-521
• /
• 2015

In this research, environmental friendly organic acid containing microetching system to improve adhesion strength between photoresist resin and Copper Clad Laminate(CCL) was developed without using strong oxidant $H_2O_2$. Etching rate and surface contamination on CCL were examined with various etching conditions with different etchants, organic acids and additives. to develope an optimum microetching condition. Etching solution with 0.04 M acetic acid showed the highest etching rate $0.4{\mu}m/min$. Etching solution with the higher concentration of APS showed the higher etching rate but surface contamination on CCL is very serious. In addition, stabilizer solution also played an important role to control the surface contamination. As a result of research, the etching solution containing 0.04 M of acetic acid, 0.1 M of APS with 4 g/L of stabilizer solution(ST-1) was best to improve adhesion between CCL and photoresist resin as well as showed the most clean and rough surface with the etching rate of $0.37{\mu}m/min$.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.7
• /
• pp.999-1005
• /
• 2004

A new stamp fabrication technique for the soft lithography has been developed in the range of several microns by means of a nano-replication printing (nRP) process. In the nRP process, a figure or a pattern can be replicated directly from a two-tone bitmap figure with nano-scale details. A photopolymerizable resin was polymerized by the two-photon absorption which was induced by a femtosecond laser. After the polymerization of master patterns, a gold metal layer (about 30 ㎚ thickness) was deposited on the fabricated master patterns for the purpose of preventing a join between the patterns and the PDMS, then the master patterns were transferred in order to fabricate a stamp by using the PDMS (poly-dimethylsiloxane). In the transferring process, a few of gold particles, which were isolated from the master patterns, remained on the PDMS stamp. A gold selective etchant, the potassium iodine (KI) was employed to remove the needless gold particles without any damage to the PDMS stamp. Through this work, the effectiveness of the nRP process with the PDMS molding was evaluated to make the PDMS stamp with the resolution of around 200 ㎚.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.3
• /
• pp.509-515
• /
• 2008

It is widely believed that the increase in the prevalence of dental erosion is due to soft drinks. The purpose of this study was to assess the influence of soft drinks and etchant on the erosion of tooth enamel and the effect of tooth brushing on the abrasion of eroded enamel, and the effect of milk, saliva and Tooth $Mousse^{(R)}$ on the remineralization. The changes in tooth enamel surface were observed by scanning electron microscophy. The results were as follows; 1. The pH of Coca-Cola and Chilsung-Cider were higher than the pH of FineEtch 37 and $Tyrian^{TM}SPE$. 2. The SEM photos revealed that the pattern of the surface eroded by Coca-Cola and Chilsung-Cider were more obvious than that eroded by etchants. 3. The results of remineralization by saliva, milk, Tooth $Mousse^{(R)}$ were not different from each other. 4. The remineralization by saliva decreased tooth brushing abrasion.