• The Korean Journal of Ceramics
• /
• 제1권4호
• /
• pp.209-213
• /
• 1995

The electrical conductivity was investigated in two series of alkali aluminosilicate glass melts, $25R_2O(R: Na and K)-xAl2O3-(75-x)SiO_2$ at temperatures ranging from 1000 to 140$0^{\circ}C$. The dependences of conductivity or activation energy on $Al_2O_3/R_2O$ of both series in the molten state showed a same behavior. These results in the molten state were compared with previous studies for sodium alkali aluminosilicate glasses in the molten and solid state, and explained in terms of the binding state: $[-O]-R^+\; and\; [AlO_4]-R^+$.

• 한국세라믹학회지
• /
• 제16권4호
• /
• pp.201-205
• /
• 1979

Domestic Yungil bentonite (montmorillonite) was treated with 1N sodium hydroxide solution in an autoclave at several temperatures, between 100 to 200℃, for 1 to 24 hrs. The products were examined by X-ray diffraction analysis. The following concecutive reaction was valid. montmorillonite→amorphous aluminosilicate→analcime The reaction rate constants k and k' at 200℃ were 0.35hr-1 and 0.22hr-1, respectively. The activation energies for the conversion from montmorillonite to amorphous aluminosilicate and from amorphous aluminosilicate to analcime were 10 kcal/mol and 12kcal/mol, respectively.

• 대한금속재료학회지
• /
• 제49권5호
• /
• pp.362-366
• /
• 2011

Aluminosilicate inorganic polymer binder has been studied as an alternative to ordinary Portland cement due to its higher physical properties, chemical resistance and thermal resistance. This study has been carried out in an attempt to understand the hardening characteristics of aluminosilicate binder by varying the content of calcium. Samples with four different ratios of Al, Si, and Ca were synthesized in this study with the Al:Si:Ca mol ratio being 1.00:1.85~1.98:0.29~2.12. Furthermore, an alkali silicate solution was prepared with the sodium hydroxide (NaOH) and sodium silicate (NaSi). The hardening characteristics of the specimens were analyzed using XRD, SEM, and TG/DTA. In addition, compressive strength and sintering time of specimens were measured as a function of calcium content. The results showed that the specimen containing 2.12 mol% calcium offered the highest compressive strength. However, the compressive strength of the specimen containing 0.26 mol% calcium was lower relative to the other specimens. The results displayed a distinct tendency that as more calcium was added to the inorganic polymer, setting time became shorter. When calcium was added to the inorganic polymer structure, a second phase was not formed, indicating that the addition of calcium does not affect the crystalline structure.

• 한국진공학회지
• /
• 제17권6호
• /
• pp.481-486
• /
• 2008

나트륨(Na) 함유량이 다른 세 종류의 유리관인 Borosilicate($Na_2O$ 4%), Soda-Lime($Na_2O$ 14%), 그리고 Aluminosilicate($Na_2O$ 0.06%) 유리관의 방전 실험을 통하여 유리관 내벽의 흑화를 관측하였다. 수은 혼합기체(Ne+Ar+Hg)의 방전에서 나트륨 함유량이 많은 유리관일수록 흑화가 심하게 나타난다. 무수은 가스(Ne+Ar)의 방전에서는 흑화가 나타나지 않는다. 나트륨 함유량이 많은 수은 방전 램프에서 봉입 기체의 압력이 작을수록 흑화의 정도가 커진다. 흑화 방지재를 도포한 유리관은 흑화가 미약하게 나타난다. 이 실험을 통하여 흑화는 유리재의 나트륨 성분과 수은 이온의 결합에 의한 아말감($NaHg_2$)이 유리관 내벽에 형성된 것으로 분석된다.

• 한국세라믹학회지
• /
• 제14권1호
• /
• pp.7-11
• /
• 1977

Domestic Anyang feldspar was treated in autoclave with 1N sodium hydroxide solution for 1-6 hrs at 100-20$0^{\circ}C$ By X-ray diffraction patterns and cation exchange capacity, the products were examined. The following concecutive reaction was valid. AlbitelongrightarrowAmorphous aluminosilicatelongrightarrowAnalcime The reaction rate constants, k1 and k2, were 0.20 and 0.15(1/hr) at 20$0^{\circ}C$ respectively. The activiation energy from albite to amorphous aluminosilicate was 10 kcal/mol, and from amorphous aluminosilicate to analcine 13 kcal/mol. The analcime obtained was excellent in cation exchange capacity, amounting to 210meq./100g.

• 한국대기환경학회지
• /
• 제20권6호
• /
• pp.823-832
• /
• 2004

Atmospheric aerosol particles collected in Seoul on four single days, each in every seasons of 2001, were characterized and classified on the basis of their chemical species using low-Z particle electron probe X-ray microanalysis (low-Z particle EPMA). Low-Z particle EPMA technique can analyze both the size and the chemical species of individual aerosol particles of micrometer size and provide detailed information on the size distribution of each chemical species. The major chemical species observed in Seoul aerosol were aluminosilicate, silicon dioxide, calcium carbonate, organic, carbon-rich, marine originated, and ammonium sulfate particles, etc. The soil originated species, such as aluminosilicate, silicon dioxide, and calcium carbonate were the most popular in the coarse fraction, meanwhile, carbonaceous and ammonium sulfate were the dominant species found in the fine fraction. Marine originated species such as sodium nitrate was frequently encountered, up to 30% of the analyzed aerosol particles.

• 한국세라믹학회지
• /
• 제20권3호
• /
• pp.255-259
• /
• 1983

Am(rphous aluminosilicate zeolite A and hydroxysodalite were obtained by reaction of Hadong kaolin(halloysite) with IN sodium hydroxide solntion in the temperature range of 60 to 10$0^{\circ}C$ For determination of the mechanism of the reaction Various possible mechanisms were compared with the experimental results. It was observed that the reaction mechamism of zeolite A synthesis from Hadong kaolin was first order consecu-tive reaction as follows : halloysitelongrightarrowamorphous aluminosilicatelongrightarrowzeolite Alongrightarrowhydroxysodalite

• 대한환경공학회지
• /
• 제29권7호
• /
• pp.810-819
• /
• 2007

물유리와 수산화나트륨 용액을 이용하여 플라이 애쉬와 고로슬래그의 알칼리 활성에 관한 연구를 수행하였다. 플라이 애쉬/슬래그 시멘트 페이스트(FSC)의 반응생성물과 미세구조를 관찰하기 위하여 XRD, FTIR, $^{29}Si$ and $^{27}Al$ NMR, TGA and SEM 분석을 수행하였다. 무정형 상태 또는 저급 결정구조를 가진 calcium silicate hydrate와 aluminosilicate 겔이 각각 고로슬래그와 플라이 애쉬의 알칼리 활성반응에 의해 생성되었다. 실험결과, 물유리 모듈 1.0과 1.2가 플라이 애쉬와 고로슬래그의 알칼리 활성반응을 위해 적정한 것으로 나타났다. 물유리 모듈 1.0과 1.2로 알칼리 활성화된 FSC 페이스트는 플라이 애쉬와 고로슬래그의 알칼리 활성반응에 의해 생성된 겔 형태의 반응생성물과 물유리에 의한 또 다른 수화물(즉 실리카겔)에 의해 좀 더 단단하고 연속적이 모체가 형성되었음을 보여주었다.

• 한국세라믹학회지
• /
• 제45권5호
• /
• pp.303-308
• /
• 2008

Mullite precursors were synthesized with aluminosilicate gels from mixture of aluminum nitrate and sodium orthosilicate by the geopolymer technique at ambient temperature. Then, the gel was heat-treated in air up to $1200^{\circ}C$ at intervals of $100^{\circ}C$. Raw and heat-treated gels were characterized by TG-DTA, XRD, FTIR, $^{29}Si$ MAS-NMR, TEM. The result to examine the crystallization of behavior though DTA, the synthesized precursors were crystallized in the temperature range from $950^{\circ}C$ to $1050^{\circ}C$. The XRD results showed that the gel compositions were begun to crystallize at various temperature. Also, it was found that the precursors of M-4 begun to crystallize at about $950^{\circ}C$. The M-4 XRD peaks were characterized better than $M-1{\sim}M-3$ at $1000^{\circ}C$. The formation temperature of mullite in this study is much lower than that of previous sol-gel methods, which crystallized at up of $1200^{\circ}C$. TEM investigations revealed that the sample with 10 nm particle size was obtained via heat-treated at $1000^{\circ}C$ for M-4.

• 한국세라믹학회지
• /
• 제45권7호
• /
• pp.395-400
• /
• 2008

This paper indicates the investigation about the development of ET (Environmental Technology) industrial geopolymeric materials from mixture silica mine waste, coal fly ash and alkali activator solution (sodium silicate) by the geopolymer technique at ambient temperature. The results showed that higher compressive strength of geopolymeric mortar increased with a reduce of L/S ratio and increased along with an increase of coal fly ash content. The compressive strengths of geopolymer mortar on low silica of C Silica Mine and K Silica Mine are 18.7 MPa, 20.4 MPa, respectively. Compressive strength of geopolymeric mortar depends on L/S ratio and coal fly ash content added.. Additionally, scanning electron microscope (SEM) techniques are used to characterize the microstructure of the geopolymeric mortars. SEM observation shows that it is possible to have amorphous aluminosilicate gel within mortar. XRD patterns indicate the fact that geopolymeric mortar is composed of amorphous aluminosilicate phase, calcite and quartz.