• International Journal of Fluid Machinery and Systems
• /
• v.7 no.2
• /
• pp.54-59
• /
• 2014

Particle Image Velocimetry combined with developed image processing method is adopted to study the liquid-solid two phase flow in the centrifugal pump impeller with crystallization phenomenon. The tracer particle is used to follow the liquid phase, which has the diameter between 8 to $12{\mu}m$. The crystal particle precipitates from the sodium sulfate solution does change the wavelength of the laser, and which has great laser scattering characteristics. The diameter of the crystal particle is larger than $20{\mu}m$. Through calculating the diameter of the particles in the image, the tracer particle and the crystal particle can be distinguished. By analyzing the experimental result, the following conclusion has been obtained. During the delay period, there is not any crystal particle and the pump performance has not been changed. As the crystallization process begins, the crystal nuclei appears from the supersaturation solution and grows larger with temperature decreasing, which has the tendency of moving towards the pressure side. The characteristics of liquid-solid two phase flow with crystallization phenomenon in the pump are obtained according to analysis of experimental results, and some guiding advices are presented to mitigate the crystallization phenomenon in pump impeller.

• Biomolecules & Therapeutics
• /
• v.15 no.2
• /
• pp.123-126
• /
• 2007

A sensitive, simple and highly selective liquid chromatography method of determination for extraction of pseudoephedrine hydrochloride from Allegra D tablet was developed. The chief benefit of the present method is the minimal sample preparation, as the procedure is only filtering through pore syringe filter. Two drugs (pseudoephedrine hydrochloride, fexofenadine) were separated on a C$_{18}$ column and analyzed by high performance liquid chromatography (HPLC). The method had a chromatographic run time of 8.0 min. 1 ml of pseudoephedrine hydrochloride solution (1 mg/ml) was filtered through 0.22 um pore syringe filter. 50 ul of filtering solution was injected to HPLC pump and we knew the retention time (1.85 min) of separating of pseudoephedrine hydrochloride using UV detector at 280 nm. We used C$_{18}$ column (4.6 mm${\times}$250 mm), mobile phase solution (<0.05 mol/L NaH$_2$PO$_4$, 2 ml/L H$_3$PO$_4$>/CH$_3$CN / sodium dodesyl sulfate = 60 ml / 40 ml / 1 g). We separated psedoephedrine hydrochloride at run time of 1.85 min from Allegra D tablet solution (1 mg/ml) filtered through 0.22 um pore syringe filter using UV detector at 280 nm. Flow rate was set at 1.0 ml/min and the column temperature was set at 40$^{\circ}C$. Psedoephedrine hydrochloride solution (1 mg/ml) separated from Allegra D tablet was filtered through 0.22 um pore syringe filter and injected 50 ul. We confirmed the peak of psedoephedrine hydrochloride at same retention time and the separating solution was freeze-dried. In conclusion, A simple isocratic reverse-phase HPLC method has been developed that provides excellent separation of pseudoephedrine from Allegra D tablet.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.18 no.4
• /
• pp.524-535
• /
• 1994

The interaction and detergency between oily soil and surfactant solution were studied Samples used were tristearin, tripalmitin and their mixture as a triglyceride, myristic acid as a fatty acid and sodium dodecyl sulfate (SDS) as surfactant. The results were as follows: 1. The mixtures of model oily soils were formed of eutectic point and their melting point were lower than them of individual oily soils. 2. The formation of liquid crystalline (LC) phase was recognized in the triangle phase diagram for SDS~ water~model oily soil system. The areas of LC phase region were in the order of SHS~ water~myristir acid> SDS~ water~mixture of tristearin, tripalmitin and myristic acid (TS/TP/M)>SDS~water~mixture of tristearin and tripalmitin (TS/TP) 3. The LC phase region expanded to wide concentration range of SDS solution and high concentration range of model oily soil with increasing temperature. Particularity, the LC phase region expanded highly at $30~40^{\circ}C$ but when the temperature was elevated above $40^{\circ}C$, expanding tendency decreased. 4. In the system of myristic acid and TS/TP/M contacted with SDS solution, the LC phase was already formed at $28^{\circ}C$ and the region of the LC phase were expanded with increasing temperature. But in the system of TS/TP contacted with SDS solution, the LC phase was not formed in whole experiment temperature. 5. The detergency of myristic acid was very high ann it was recognized that the formation of the LC phase played an important role in the detergency. The detergency of TS/TP was very for low, but when TS/TF was mixed with myristic acid, the detergency of TS/TP increased. It is supposed that the LC phase was formed butween SDS solution and myristic acid promoted to penetration of SDS solution into the inner parts of TS/TP.

• Journal of Food Hygiene and Safety
• /
• v.37 no.5
• /
• pp.317-322
• /
• 2022

Corynebacterium pseudotuberculosis is the causative agent of caseous lymphadenitis (CLA), a chronic contagious disease in small ruminants. The prevalence of CLA has been reported to be >50% in Korean black goats. CLA is difficult to control due to a lack of efficient vaccines and treatment methods. Effective disinfection of the farm environment may be an alternative strategy for reducing the spread of C. pseudotuberculosis. The objective of this study was to evaluate the efficacy of commercial disinfectants against CLA. The six commercial disinfectants, largely composed of sodium dichloroisocyanurate, sodium hypochlorite, potassium monopersulfate triple salt, quaternary ammonium, citric acid, and copper sulfate, were tested against five different genotypes of C. pseudotuberculosis isolated from goat farms in Korea. Efficacy tests were performed in accordance with the disinfectant efficacy test guidelines recommended by the Animal and Plant Quarantine Agency of Korea with slight modifications. All disinfectants except for copper sulfate exhibited >99.99% killing efficacy under hard water conditions following 30 min of incubation, which is the recommended standard treatment time according to guidelines. The minimum bactericidal treatment time was evaluated by employing treatments for durations of 1, 5, and 15 min. The most effective compounds under hard water conditions were sodium dichloroisocyanurate, potassium monopersulfate triple salt, and sodium hypochlorite, exhibiting >99.99% killing efficacy after 1 min of treatment. In the aqueous solution forms, citric acid and the quaternary ammonium compound were the most effective, but required at least 5 min to kill >99.99% of the bacteria. The current study characterizes the killing efficacy of six commercial disinfectant active compounds against C. pseudotuberculosis. Thus, this study provides essential information regarding the efficacy of the disinfectants used to control CLA in goat farms.

• Korean Journal of Microbiology
• /
• v.13 no.3
• /
• pp.109-115
• /
• 1975

DNA's were extracted from Saccharomyces cerevisiae and Mycobacterium phlei and the damaging cell walls of these microoragnisms were examined under an electron microscope in the extraction process in which a number of physico-chemical tratments of cells was involved. While the DNA was easily extracted from S. cerevisiae using conventional meylelded very little DNA, of M. phlei was extremely difficult to isolate and yielded very little DNA, applying various methods of isolation published earlier. When the cell walls of S. cerevisiae were examined with the electron microscope, they were not yet damaged even after the cells were treated with sodium lauryl sulfate(SLS) and ethylene diamine tetracetic acid(EDTA), but they were completely destroyed by the treatment of sodium perchlorate followed by the addition of chloroform and a vigorous agitation. Oozing cytoplasm through the broken cell walls was also observed. In the extraction of DNA from M.phlei, the pronase was not effective at the aerobic environment of the sample. When phenol was applied at the last step of DNA isolation, an extreme damage mass yielding little DNA into the solution. Unlike the cells of S.cerevisiae.M.phlei cells showed a tendency of aggregation, thus the destruction of cell walls by sodium hydroxide was seen only on the walls of peripheral cells in the aggregated mass, leaving the walls of the inner cells undamaged.

• Korean Journal of Food Science and Technology
• /
• v.34 no.3
• /
• pp.431-436
• /
• 2002

To develop a method for increasing RS level in maize starch, cross-linked resistant starches treated with annealing were prepared. Maize starch and amylomaize VII were used in the study and annealed at $40{\sim}60^{\circ}C$ before cross-linking modification. To compare effect of annealing below gelatinization temperature, starches were heat treated at 70 and $100^{\circ}C$. RS contents were assayed by pancreatin-gravimetric (P/G) method. When maize starch and amylomaize VII were cross-linked at $45^{\circ}C$ and pH 11.0 by slurrying the starch on a solution of STMP(sodium trimetaphosphate), STPP(sodium tripolyphosphate), and sodium sulfate, RS content was 14.7% and 45.3%, respectively. Annealing below gelatinization temperature before cross-linking increased RS contents of prepared cross-linked starches but did not affect the swelling power. Heat treatment above gelatinization temperature increased the swelling power of cross-linked starch prepared from maize starch. The characteristics by X-ray diffractometry and scanning electron microscopy of cross-linked resistant starch were not changed by annealing.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.311-311
• /
• 2009

Carbon nanotubes (CNTs) belong to an ideal material for field emitters because of their superior electrical, mechanical, and chemical properties together with unique geometric features. Several applications of CNTs to field emitters have been demonstrated in electron emission devices such as field emission display (FED), backlight unit (BLU), X-ray source, etc. In this study, we fabricated a CNT cathode by using filtration processes. First, an aqueous CNT solution was prepared by ultrasonically dispersing purified single-walled CNTs (SWCNTs) in deionized water with sodium dodecyl sulfate (SDS). The aqueous CNT solution in a milliliter or even several tens of micro-litters was filtered by an alumina membrane through the vacuum filtration, and an ultra-thin CNT film was formed onto the alumina membrane. Thereafter, the alumina membrane was solvated by acetone, and the floating CNT film was easily transferred to indium-tin-oxide (ITO) glass substrate in an area defined as 1 cm with a film mask. The CNT film was subjected to an activation process with an adhesive roller, erecting the CNTs up to serve as electron emitters. In order to measure their luminance characteristics, an ITO-coated glass substrate having phosphor was employed as an anode plate. Our field emitter array (FEA) was fairly transparent unlike conventional FEAs, which enabled light to emit not only through the anode frontside but also through the cathode backside, where luminace on the cathode backside was higher than that on the anode frontside. Futhermore, we added a reflecting metal layer to cathode or anode side to enhance the luminance of light passing through the other side. In one case, the metal layer was formed onto the bottom face of the cathode substrate and reflected the light back so that light passed only through the anode substrate. In the other case, the reflecting layer coated on the anode substrate made all light go only through the cathode substrate. Among the two cases, the latter showed higher luminance than the former. This study will discuss the morphologies and field emission characteristics of CNT emitters according to the experimental parameters in fabricating the lamps emitting light on the both sides or only on the either side.

• Membrane Journal
• /
• v.18 no.1
• /
• pp.7-25
• /
• 2008

Sodium dodecyl sulfate, which was anionic surfactant, at a concentration higher than its critical micellar concentration was added to calcium solution for forming micelles. Then aggregates were formed by adsorption or binding of calcium ions on the surface of micelles, and gathering between them, and then rejected by two kinds of ceramic membranes to remove calcium ions. As result, rejection rates of calcium were higher than 99.98%. And in our experimental range the higher TMP trended to increase the resistance of membrane fouling ($R_f$), total permeate volume ($V_T$), dimensionless permeate flux ($J/J_o$) and permeate flux (J) because TMP was driving force. And we investigated effects of $N_2$-back-flushing time and filtration time, that was back-flushing period, during periodic $N_2$-back-flushing on ceramic membranes. As result, optimal BTs for NCMT-623l ($0.07{\mu}m$ pore size) and NCMT-7231 membrane ($0.10{\mu}m$) were 10 sec and 15 sec, respectively. Also, optimal FT was 5 min for both membranes, and the frequent $N_2$-back-flushing could decrease membrane fouling effectively. Then, the optimal conditions resulting from our experiments for synthetic calcium solution were applied to groundwater using as washing process of soymilk package. As result, rejection rates of calcium were higher than 99.98%.

• Applied Chemistry for Engineering
• /
• v.4 no.2
• /
• pp.273-283
• /
• 1993

Addition of various acids or organic compounds to the electrolyte solution during the electrodeposition of $PbO_2$ on titanium madras substrate strongly affected performance of the deposited $PbO_2$ layer. Results of X-ray diffractometry ascertained that ${\beta}-PbO_2$ was deposited in acidic electrolyte. Among additives used in this experiment, $PbO_2$ with a high oxygen overvoltage was electrodeposited when sodium lauryl sulfate was added, and $PbO_2$ with a lower chlorine overvoltage was electrodeposited when polyethylene glycol was added to the electrolyte solution. The oxygen and chlorine overvoltage of $PbO_2$ was strongly dependent on the stirring provided during the electrodeposition experiment. It was observed by the SEM results that the $PbO_2$ grains deposited when stirring was not provided during the electrodeposition have larger than $PbO_2$ grains deposited by stirring. In the $PbO_2$ deposition under acidic electrolyte, the oxygen overvoltage increased with larger $PbO_2$ grains and the chlorine overvoltage decreased with smaller $PbO_2$ grains. The optimal current efficiency of $PbO_2$ in the presence of perchloric acid was observed at $Pb(NO_3)_2$ 560g/l, $65{\sim}70^{\circ}C$, and pH>1.

• Polymer(Korea)
• /
• v.36 no.2
• /
• pp.177-181
• /
• 2012

This study presents the preparation of double emulsions in a poly(dimethylsiloxane) (PDMS)-based microfluidic device. To improve the wettability of hydrophilic continuous phase onto a hydrophobic PDMS microchannel, the surface was modified with 3-(trimethoxysilyl) propyl methacrylate (TPM) and then sequentially reacted with acrylic acid monomer solution, which produced selective covalent bonding between acrylic acids and methacrylate groups. For the proof of selective surface modification, tolonium chloride solution was used to identify the modified region and we confirmed that the approach was successfully performed. When water containing 0.5% w/w sodium dodecyl sulfate and 1% w/w Span80 with hexadecane were loaded into the selectively modified microfluidic channels, we can produce stable double emulsion. Based on the spreading coefficients, we predict the morphology of double emulsions. Our proposed method efficiently produces monodisperse double emulsions having 48.5 ${\mu}m$(CV:1.6%) core and 65.1 ${\mu}m$ (CV:1.6%) shell. Furthermore, the multiple emulsions having different numbers of core were easily prepared by simple control of flow rates.