• Korean Journal of Soil Science and Fertilizer
• /
• v.41 no.3
• /
• pp.177-183
• /
• 2008

Sodium is known to reduce a plant growth and yields. However, the relationships between physiological response of seedling and salinity stress caused by growing media are not well understood yet. We conducted experiments to investigate change of some parameters including Na, EC, moisture content in media under different air temperature ($15^{\circ}C$, $25^{\circ}C$), and the response of fruit-vegetables such as cucumber, oriental melon on saline conditions originated from horticultural substrate. Volumetric moisture content of media at $15^{\circ}C$ was 70%, but at $25^{\circ}C$ was decreased by 45% within 22 hrs, showing below optimal matric potential, approximately. During reaction time, the increase of Na concentration was significantly greater in saline substrate than in control. The decrease rate of Na concentration according to supplying irrigation water was higher in saline substrate than in control. $CO_2$ assimilation rate and transpiration rate of Korea melon grown in low temperature were decreased with a Na/cation ratio in hydroponic solution. Water saturation deficit was also increased significantly at $15^{\circ}C$ as compare to $25^{\circ}C$. Saline stress during nursery stage induced a reduction of seedling quality, growth and cucumber yield. The results suggest that the relationship between uncontrolled Na uptake of seedling from saline substrate and meteological condition is responsible for saline stress.

• Korean Chemical Engineering Research
• /
• v.55 no.1
• /
• pp.34-39
• /
• 2017

In this study, intermolecular crosslinked carboxymethyl cellulose sodium salt (CMC) and porcine Cartilage Acellular Matrix (PCAM) blended hydrogel films for anti-adhesive barriers were prepared by gamma-ray radiation. The effects of the CMC/PCAM concentration and blending ratio on the morphology, gel fraction, gel strength, and degree of swelling were determined. The results indicated that crosslinked CMC/PCAM films show significantly lower the gel-fraction than CMC films. The degree of attachment and proliferation of human vascular endothelial cells on CMC/PCAM films was lower than the CMC films. We show the capacity of the CMC and PCAM to be hydrogel films, and the ability to reduce cell adhesion and proliferation on these films by modification with cell anti-adhesion molecules of PCAM. In conclusion, this study suggests that radiation cross-linked CMC/PCAM hydrogel films endowed with anti-adhesion ligands may allow for improved regulation of cell anti-adhesion behavior for prevent peritoneal adhesions.

• Journal of Korean society of Dental Hygiene
• /
• v.24 no.3
• /
• pp.219-227
• /
• 2024

Objectives: The pulp is the center of the tooth containing nerves and blood vessels. The condition in which the pulp becomes inflamed due to caries or periodontitis is called pulpitis. Pulpitis is a difficult-to-treat disease and causes peripheral nerve tissue changes and severe pain; however, the relationship between neuronal activity and voltage-gated sodium channel 1.7 (Nav1.7) expression in the trigeminal ganglion (TG) during pulpitis has not been well studied. In this study, we found that experimentally induced pulpitis activates Nav1.7 expression in the periphery, leading to neuronal overexpression in the TG. Thus, we sought to identify ways to regulate this process. Methods: Acute pulpitis was induced in rat maxillary molars by treating the pulp with allyl isothiocyanate (AITC). Three days later, in vivo optical imaging was used to record and compare neural activities in the TG. Western blotting was used to identify molecular changes in terms of the expression of extracellular signal-regulated kinase (ERK), c-Fos, transient receptor potential ankyrin 1 (TRPA1), and collapsin response mediator protein-2 (CRMP2) in the brain stem. Results: The results confirmed the neurological changes in the TGs of the pulpitis model, and histological and molecular biological evidence confirmed that increased Nav1.7 expression induced by pulpitis leads to pain. Furthermore, selective inhibition of Nav1.7 resulted in changes in neural activity, suggesting that pulpitis induces increased Nav1.7 expression, and that effective control of Nav1.7 could potentially reduce pain. Conclusions: The inhibition of overexpressed Nav1.7 channels may modulate nociceptive signal processing in the brain and effectively control pain associated with pulpitis.

• Tuberculosis and Respiratory Diseases
• /
• v.39 no.2
• /
• pp.159-166
• /
• 1992

Background:Sulfiting agents are widely used as preservatives and antioxidants in foods, beverages and drugs including bronchodilators. There have been reports of sulfite-related reactions such as anaphylaxis, urticaria, angioedema, abdominal discomfortness as well as bronchospasm. Several investigators reported that sulfite-sensitive asthmatic patients comprised from 3.9% to 8.2% of all asthmatic patients and its prevalence was higher in steroid-dependent group than in steroid-independent group. Subjects and Method:We performed oral provocation test with sodium bisulfite and aspirin in 17 asthmatic patients who have experienced aggravation of their symptoms after administration of drugs or foods. All of them were steroid dependent asthmatics. We observed clinical symptoms and steroid requirements from 1 to 18 months. Result:Ten of them showed severe bronchoconstriction after the ingestion of sodium bisulfite (50 to 200 mg) within 30 minutes. Concurrent aspirin intolerance was noted by oral provocation test in four cases (40%). Three of them showed positive responses on skin prick test with sulfite (10 or 100 mg/ml). Mean total eosinophil counts was $844/mm^3$ at asthmatic attack. And there was no significant responses on skin prick test and IgE-RAST to common inhalant allergens. After complete avoidance from sulfite containing foods and drugs as well as antiasthmatic medication for 1 to 18 months, nine of them (90%) could stop or reduce the steroid requirements. ConcIusion:It was suggested that severe steroid dependent and intrinsic type of asthmatic patients should be evaluated for sulfite-sensitivity.

• Clinical and Experimental Pediatrics
• /
• v.49 no.6
• /
• pp.593-601
• /
• 2006

Allergic rhinitis is a common disease of childhood characterized by nasal, throat, and ocular itching, rhinorrhea, sneezing, nasal congestion. Those affected with allergic rhinitis often suffer from associated inflammatory conditions of the mucosa, such as allergic conjunctivitis, rhinosinusitis, asthma, otitis media with effusion, and other atopic conditions, such as eczema and food allergies. Allergic rhinitis must be diagnosed and treated properly to prevent complications and impaired quality of life. Despite a high prevalence, allergic rhinitis isoften undiagnosed and inadequately treated, especially in the pediatric population. The first step in treatment is environmental control when appropriate. It may be difficult to eliminate all offending allergens effectively to reduce symptoms, so medications are often required. Many different classes of medications are now available, and they have been shown to be effective and safe in a large number of well-designed, clinical trials. Antihistamines are effective in treating immediate symptoms of sneezing, pruritus, watery eyes, and rhinorrhea. Second generation antihistamines are the preferred antihistamines because of their superior side effect profile. Thus, decongestants are commonly used with oral antihistamines. Intranasal corticosteroids are the most effective therapy for allergic rhinitis. Leukotriene modifier may be as effective as antihistamines in treating allergic rhinitis symptoms. Cromolyn sodium is an option for mild disease when used prophylactically, and ipratropium bromide is effective when rhinorrhea is the predominant symptom. When avoidance measures and medications are not effective, specific immunotherapy is an effective alternative. Only immunotherapy results in sustained changes in the immune system. Because of improved understanding of the pathogenesis, new and better therapies may be forthcoming. The effective treatment of allergic rhinitis in children will reduce symptoms and will improve overall health and quality of life, making a happier, healthier child.

• Korean Journal of Clinical Laboratory Science
• /
• v.36 no.2
• /
• pp.121-126
• /
• 2004

The primary goal of six sigma is to improve patient satisfaction, and thereby profitability, by reducing and eliminating defects. Defects may be related to any aspect of customer satisfaction: high product quality, schedule adherence, cost minimization, process capability indices, defects per unit, and yield. Many six sigma metrics can be mathematically related to the others. Literally, six means six standard deviations from the mean or median value. As applied to quality metrics, the term indicates that failures are at least six standard deviations from the mean or norm. This would mean about 3.4 failures per million opportunities for failure. The objective of six sigma quality is to reduce process output variation so that on a long term basis, which is the customer's aggregate experience with our process over time, this will result in no more than 3.4 defect Parts Per Million(PPM) opportunities (or 3.4 Defects Per Million Opportunities. For a process with only one specification limit (upper or lower), this results in six process standard deviations between the mean of the process and the customer's specification limit (hence, 6 Sigma). The results of applicative six sigma experiment studied on 18 items TP, ALB, T.B, ALP, AST, ALT, CL, CK, LD, K, Na, CRE, BUN, T.C, GLU, AML, CA tests in clinical chemistry were follows. Assessment of process performance fits within six sigma tolerance limits were TP, ALB, T.B, ALP, AST, ALT, CL, CK, LD, K, Na, CRE, BUN, T.C, GLU, AML, CA with 72.2%, items that fit within five sigma limits were total bilirubin, chloride and sodium were 3 sigma. We were sure that the goal of six sigma would reduce test variation in the process.

• Journal of the East Asian Society of Dietary Life
• /
• v.9 no.3
• /
• pp.378-385
• /
• 1999

A reduced NaCl intake for the general population of the world has been recommended to reduce the overall blood pressure level and hence to reduce the overall incidence of cardiovascular disease. A high NaCl diet convincingly contributes to elevated arterial pressure in humans and animal models of hypertension. Among individuals there is considerable variability of blood pressure responsiveness to NaCl intake. In normotensive as well as hypertensive subjects, blood pressure can be judged to be salt sensitivity (SS) when observed to vary directly and substantially with the net intake of NaCl. The prevalence of SS in normotensive adults in the U.S. ranges from 15% to 42% and in hypertensive adults from 28% to 74%. SS is a risk factor for hypertension and may be an important marker in the identification of children for hypertension prevention programs. High NaCl intakes produce expansion of the extracellular fluid volume and thus increase blood pressure. Nonchloride salts of sodium does not expand the extracellular fluid volume and does not alter blood pressure. Blood pressure response to NaCl may be modified by other components of the diet. Low dietary intakes of potassium or calcium augment NaCl-induced increases of blood pressure. Conversely, high dietary intakes of potassium or calcium attenuate NaCl-induced hypertension. A greater intakes of potassium or calcium may prevent or delay the occurrence of hypertension. SS occurs when dietary potassium is even marginally deficient but is dose-dependently suppressed when dietary potassium is increased within its normal range. Orally administered KHCO$_3$, abundant in fruits and vegetates, but not KCl has a calcium-retaining effect which may contributed to its reversal of pressor effect of dietary NaCl. Since nutrients other than NaCl also affect blood pressure levels, a reduced NaCl intake should be only one component of a nutritional strategy to lower blood pressure.

• Nuclear Engineering and Technology
• /
• v.53 no.2
• /
• pp.423-429
• /
• 2021

The investigation of the utilization of enriched ²⁰⁸Pb as a coolant to enhance the performance of a long-life fast reactor with a Modified CANDLE (Constant Axial shape of Neutron flux, nuclide densities, and power shape During Life of Energy production) burnup scheme has performed. The analyzes were performed on a reactor with thermal power of 800 MegaWatt Thermal (MWTh) with a refueling process every 15 years. Uranium Nitride (enriched ¹⁵N), ²⁰⁸Pb, and High-Cr martensitic steel HT-9 were employed as fuel, coolant, and cladding materials, respectively. One of the Pb-nat isotopes, ²⁰⁸Pb, has the smallest neutron capture cross-section (0.23 mb) among other liquid metal coolants. Furthermore, the neutron-producing cross-section (n, 2n) of ²⁰⁸Pb is larger than sodium (Na). On the other hand, the inelastic scattering energy threshold of ²⁰⁸Pb is the highest among Na, ^natPb, and Bi. The small inelastic scattering cross-section of ²⁰⁸Pb can harden the neutron energy spectrum. Therefore, ²⁰⁸Pb is a better neutron multiplier than any other liquid metal coolant. The excess neutrons cause more production than consumption of ²³⁹Pu. Hence, it can reduce the initial fuel loading of the reactor. The selective photoreaction process was developing to obtain enriched ²⁰⁸Pb. The neutronic was calculated using SRAC and JENDL 4.0 as a nuclear data library. We obtained that the modified CANDLE reactor with enriched ²⁰⁸Pb as coolant and reflector has the highest k-eff among all reactors. Meanwhile, the ^natPb cooled reactor has the lowest k-eff. Thus, the utilization of the enriched ²⁰⁸Pb as the coolant can reduce reactor initial fuel loading. Moreover, the enriched ²⁰⁸Pb-cooled reactor has the smallest power peaking factor among all reactors. Therefore, the enriched ²⁰⁸Pb can enhance the performance of a long-life Modified CANDLE fast reactor.

• Journal of Animal Science and Technology
• /
• v.65 no.5
• /
• pp.895-911
• /
• 2023

Processed meat products play a vital role in our daily dietary intake due to their rich protein content and the inherent convenience they offer. However, they often contain synthetic additives and ingredients that may pose health risks when taken excessively. This review explores strategies to improve meat product quality, focusing on three key approaches: substituting synthetic additives, reducing the ingredients potentially harmful when overconsumed like salt and animal fat, and boosting nutritional value. To replace synthetic additives, natural sources like celery and beet powders, as well as atmospheric cold plasma treatment, have been considered. However, for phosphates, the use of organic alternatives is limited due to the low phosphate content in natural substances. Thus, dietary fiber has been used to replicate phosphate functions by enhancing water retention and emulsion stability in meat products. Reducing the excessive salt and animal fat has garnered attention. Plant polysaccharides interact with water, fat, and proteins, improving gel formation and water retention, and enabling the development of low-salt and low-fat products. Replacing saturated fats with vegetable oils is also an option, but it requires techniques like Pickering emulsion or encapsulation to maintain product quality. These strategies aim to reduce or replace synthetic additives and ingredients that can potentially harm health. Dietary fiber offers numerous health benefits, including gut health improvement, calorie reduction, and blood glucose and lipid level regulation. Natural plant extracts not only enhance oxidative stability but also reduce potential carcinogens as antioxidants. Controlling protein and lipid bioavailability is also considered, especially for specific consumer groups like infants, the elderly, and individuals engaged in physical training with dietary management. Future research should explore the full potential of dietary fiber, encompassing synthetic additive substitution, salt and animal fat reduction, and nutritional enhancement. Additionally, optimal sources and dosages of polysaccharides should be determined, considering their distinct properties in interactions with water, proteins, and fats. This holistic approach holds promise for improving meat product quality with minimal processing.

• Restorative Dentistry and Endodontics
• /
• v.48 no.4
• /
• pp.39.1-39.23
• /
• 2023

Objectives: This study aimed to investigate the effectiveness of different topical/systemic agents in reducing the damage caused by bleaching gel to pulp tissue or cells. Materials and Methods: Electronic searches were performed in July 2023. In vivo and in vitro studies evaluating the effects of different topical or systemic agents on pulp inflammation or cytotoxicity after exposure to bleaching agents were included. The risk of bias was assessed. Results: Out of 1,112 articles, 27 were included. Nine animal studies evaluated remineralizing/anti-inflammatories agents in rat molars subjected to bleaching with 35%-38% hydrogen peroxide (HP). Five of these studies demonstrated a significant reduction in inflammation caused by HP when combined with bioglass or MI Paste Plus (GC America), or following KF-desensitizing or Otosporin treatment (n = 3). However, orally administered drugs did not reduce pulp inflammation (n = 4). Cytotoxicity (n = 17) was primarily assessed using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay on human dental pulp cells and mouse dental papilla Cell-23 cells. Certain substances, including sodium ascorbate, butein, manganese chloride, and peroxidase, were found to reduce cytotoxicity, particularly when applied prior to bleaching. The risk of bias was high in animal studies and low in laboratory studies. Conclusions: Few in vivo studies have evaluated agents to reduce the damage caused by bleaching gel to pulp tissue. Within the limitations of these studies, it was found that topical agents were effective in reducing pulp inflammation in animals and cytotoxicity. Further analyses with human pulp are required to substantiate these findings.