• Applied Chemistry for Engineering
• /
• v.3 no.2
• /
• pp.288-295
• /
• 1992

The reduction of nitrobenzene by triirondodecacarbonyl over phase transfer catalysts was investigated. The phase transfer catalysts showed a good yield of aniline at room temperature. Benzyltriethylammonium chloride, tricaprylmethyl ammonium chloride, 18-crown-6 and polyethyleneglycol-400 were good phase transfer catalysts in this reaction. The effect of reaction temperature, concentration of sodium hydroxide and organic solvents on the reaction rate and yield of aniline were studied in this work.

• Journal of the Korean institute of surface engineering
• /
• v.49 no.5
• /
• pp.472-476
• /
• 2016

The nano-array of the vertically aligned rod-like particles grown on ZnO coated glass-substrates was obtained via hydrothermal process. ZnO thin film coatings were prepared on the glass substrates using a MOD (metallorganic deposition) dip-coating method with zinc chloride dihydrate as starting material and 2-ethylhexanol as solvent. ZnO nanorods were synthesized on the seeded substrates by hydrothermal method at $80^{\circ}C$ using zinc-nitrate hexahydrate as a Zn source and sodium hydroxide as a mineralizer. Under the hydrothermal condition, the rod-like nanocrystals were easily attaching on the already ZnO seeded (coated) glass surface. It has been shown that the hydrothermal synthesis parameters are key factors in the nucleation and growth of ZnO crystallites. By controlling of hydrothermal parameters, the ZnO particulate morphology could be easily tailored. Rod-shaped ZnO arrays on the glass substrates consisted of elongated crystals having 6-fold symmetry were predominantly developed at high Zn precursor concentration in the pH range 7~11.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.11 no.4
• /
• pp.13-16
• /
• 1982

The hydrolytic conversion of sawdust was studied by sulfuric acid-enzymatic and sodium hydroxide-enzymatic treatments. Sugars were identified by paper chromatography and quantified colorimetrically. Sawdust yielded dextrose and xylose in concentrations ranging from 3.01 to 3.64 and 3.48 to 6.61 grams per 100g. Under optimum conditions, the total concentration of sugars was 10.7 grams per 100 grams.

• Archives of Pharmacal Research
• /
• v.10 no.2
• /
• pp.88-93
• /
• 1987

Chitosan ($\beta$-D-glucosaminan) is chemically prepared from chitin (N-acetyl-$\beta$- D-glucosaminan) which is an unutilized natural resource. We now report on the suitability of the chitosan matrix for use as vehicles for the controlled release of drugs. Salicylic acid and aspirin were used as model drugs in this study. The permeation of salicylic acid in the chitosan membranes was determined in a glass diffusion cell with two compartments of equal volume. Drug release studies on the devices were conducted in a beaker containing 5% sodium hydroxide solution. Partition coefficient (Kd) value for acetate membrane (472) is much greater than that for fluoro-perchlorate chitosan membrane (282). Higher Kd value for acetate chitosan membrane appears to be inconsisstent with the bulk salicylic acid concentration. The permeability constants of fluoro-perchlorate and acetate chisotan membranes for salicylic acid were 3.139 ${\times}10^{-7}cm^2$ min up to 60 min and that of 30% aspirin in the devices was 4.739${\times}10^{-7}cm^2$sec upto 60 min. As the loading dose of aspirin in a chitosan device increased, water up-take of chitosan device increased, but in case of salicylic acid it decreased. The release rate increased with increase in the molecular volume of the drugs. Thses result suggest that the release mechanism may be controlled mainly by diffusion through pores.

• Proceedings of the Korean Fiber Society Conference
• /
• 1990.06b
• /
• pp.8-8
• /
• 1990

A new method for the graft polymerization of acrylonitrile onto starch is presented. Graft polymerization of acrylonitrile onto starch and the subsequent hydrolysis in sodium hydroxide solution to prepare absorbents is well known. This process has been utilized to produce the commercial product, Super Slurper. In a typical batch process, ~5% starch in water mixture is gelatinized at $95^{\circ}C$ under stirring for 1 hour then cooled to room temperature. The graft polymerization itself is carried out for approximately 2 hours at $25~30^{\circ}C$ on the gelatinized starch by eerie ion initiation. In this study, graft polymerization of acrylonitrile onto starch via a reactive extrusion process which is a continuous, efficient process is described. Initial concentration of starch in water is 35% and the reaction temperatures are between $50~80^{\circ}C$. However, the most significant difference in the reactive extrusion process is the short time in which the graft polymerization takes place. Preliminary results on the properties of graft polymerization products obtained from the reactive extrusion process are compared to those obtained from the batch process as well as the absorbency of the hydrolyzed samples. Absorbent material has also been prepared by sequential grafting and saponification in the extruder followed by a 2 hour heat treatment of the extrudate in an air circulated oven at $100^{\circ}C$.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.2
• /
• pp.274-285
• /
• 2015

In view of the environmental and health hazards posed by synthetic insecticides, the use of plant products as botanical insecticides has gained increasing in recent years. In this study, we reported the insecticidal activity of extracts isolated from Coptis chinensis. On crude extraction, among the various solvent types tested (water, 1% (w/v) of sodium hydroxide, 70% ethanol), the 70% ethanol extract showed the best insecticidal activity (36.5%). Three different fractions (n-hexane, chloroform and ethyl acetate) were obtained from crude extract (70% ethanol) of the chloroform fraction and found to have noteworthy insecticidal activity (62.9%) by filter paper contact bioassay. Their chemical structures were identified as 2-methoxy-4-vinylphenol and aniline by head space-GC-MS analysis. Both compounds displayed a dose-dependent insecticidal activity of Myzus persicae (Sulzer). Insecticidal activity at the lowest concentration tested (500 ppm) approached 85.4% in the aniline compared with 79.9% in the 2-methoxy-4-vinylphenol. The insecticidal activity was greater for the aniline than 2-methoxy-4-vinylphenol. It is believed that the insecticidal activity is due mainly to the presence of aniline.

• FLOWER RESEARCH JOURNAL
• /
• v.16 no.1
• /
• pp.17-22
• /
• 2008

Four kinds of leaves with different shapes of leaf blade were used as experimental materials to establish an optimum condition for treating leaves to obtain skeleton leaves. Effective concentration and length of soaking time in a hot NaOH solution, which resulted in high valued ornaments, were 60% (v/v) for 50 minutes for Acer buergerianum (palmatifid), 20% (v/v) for 50 minutes for Ilex cornuta (serrate), 20-60% (v/v) for 70 minutes for Quercus mongolia (lobed), and 20-40% (v/v) for 70 minutes for Quercus palustris (parted). Through a series of the process of soaking leaves in a hot NaOH solution, rinsing or brushing to remove mesophyll, drying, and dying, high quality ornaments could be obtained.

• Korean Journal of Chemical Engineering
• /
• v.35 no.12
• /
• pp.2413-2420
• /
• 2018

Sida acuta, a common type of weed in Thailand, contains relatively high cellulose (42.7%) content. We pretreated NaOH to improve glucose recovery from S. acuta. The effect of pretreatment temperature and NaOH concentration was fundamentally investigated based on hydrolysis efficiency with recovery of solid fraction. The pretreatment condition was determined to be 3% NaOH at $60^{\circ}C$ for 9 h, which showed the highest glucose recovery. The hydrolysates obtained by enzymatic hydrolysis of S. acuta were applied to the fermentation of Saccharomyces cerevisiae K35, and a theoretical yield of 97.6% was achieved at 18 h. This indicated that the hydrolysates medium without detoxification had no negative effects on the fermentation. The production of biomass into bioethanol was evaluated based on the material balance of 1,000 g basis. Following this estimation, approximately 28 g and 110 g bioethanol could be produced by untreated and pretreated S. acuta, respectively, and this production was improved about 3.9-fold by NaOH pretreatment. These results again show the importance of pretreatment in biorefinery process.

• Korean Journal of Animal Reproduction
• /
• v.11 no.1
• /
• pp.16-21
• /
• 1987

We describe a simple, solid-phase chemiluminescence immunoassay for the meausrement of serum T4. An immunoglobulin G fraction of antibody to thyroxine was passively absorbed onto the walls of polystyrene tubes. The labeled antigen was thyroxine-aminobutylethylisoluminol. After the bindings reaction (37$^{\circ}C$ for 1 hour), the solution is removed by aspiration and the antibody-bound fraction was washed once with buffer. Sodium hydroxide (5mol/1,200${mu}ell$) was added and the mixture incubated for 30 minutes at 6$0^{\circ}C$. Luminescence was initiated by oxidation of the label with micropeeroxidase-hydrogen peroxide and the signal of light emission was intergrated for 10 sec. The light yield was inversely proportional to the concentration of T4 in the standard or sample. An evaluation of the method gave the following values sensitivity of calibration curve 7.5$\pm$2.8 nmol/l (mean$\pm$SD). The intra-assay precision (CV%) was 8.9, 7.3 and 5.4. The inter-assay precision (CV%) was 10.2, 8.1 and 7.1. When seum samples were assayed for T4, the results obtained by solid-phase CIA and the conventional RIA agreed well(n=3.5, r=0.954).

• Journal of the Korean Applied Science and Technology
• /
• v.13 no.2
• /
• pp.85-92
• /
• 1996

Chitosan itself has been prepared using chitin, one of the most abundant compounds in nature, as a starting material. We have synthesized the water-soluble chitosan derivative, N-dithiocarboxy chitosan sodium salt, through the reaction of water-soluble chitosan with carbon disulfide in the presence of alkali metal hydroxide. To elucidate this natural polymer capacity of adsorbing heavy metal ions, we have performed adsorption experiments using the water-soluble chitosan derivative various average molecular weight and of different percent contents of sulfur. The effect of pH, adsorption time and temperature on adsorption efficiency was also studied. The adsorbent derived from water-soluble chitosan of average molecular weight ranging $9,000{\sim}120,000$ was shown to have the highest capacity of adsorbing heavy metal ions. On the whole, adsorbing efficiency was increased as the reaction time goes longer and also increased as the reaction temperture goes higer in temperture range of $15^{\circ}C{\sim}45^{\circ}C$. The adsorption capacity at various pH, however, was appeared to vary depending on the heavy metal ions studied Judging from these finding, water-soluble N-dithiocarboxy chitosan sodium salt, a derivative of a biodegradable nature polymer, is believed to be a potential adsorbent for heavy metal ions since it not only is shown to lower the concentration of heavy metal ions to below the drainage quality standard, but also it would not cause acidification and hardening of soil which is one of the detrimental effects of synthetic macromolecular adsorbents present.