• Archives of Pharmacal Research
• /
• v.9 no.1
• /
• pp.5-9
• /
• 1986

Partialy purified ginseng proteins were either treated with sodium dodecyl sulfate (SDS) and .betha.-mercaptoethanol to denature the proteins or not, and subjected to Thin Layer Chromatography (TLC) and High Performance Liquid Chromatography (HPLC) to compare the components of each fraction. Standard proteins of known molecular weights (MW) were also either treated with SDS and .betha.-mercaptoethanol or not, and subjected to HPLC to obtain regression lines for MW determination. From the retention times obtained from samples in eiether case by HPLC, the MW were estimated as following in SDS treated condition, Gl fraction showed three peaks each with MW of above 100, 000, 51, 000 and 19, 000. Gll showed one original peak with MW of 21, 000 and Gll, two peaks each with MW of 19, 000 and 14, 000. On the other hand, in non-SDS treated condition, GI fraction showed two peaks each with MW of above 200, 000 NA 52, 000. Gll showed one original peak with MW of 41, 000 and Gill, three peaks each with MW of 28, 000, 19, 000 and 14, 000.

• Journal of Integrative Natural Science
• /
• v.7 no.2
• /
• pp.120-123
• /
• 2014

When a hydrophobic and hydrophilic environments of bis(2,2'-bipyridyl) copper(II) ($Cu(bpy)_2{^{2+}}$) are produced in the presence of anionic surfactant sodium dodecyl sulfate (SDS), cyclic voltammetry is used to investigate the microscopic environments which occurs at the glassy carbon electrode. In order to see the relation between ${\Delta}E_p$ and a critical micelle concentration (CMC), ${\Delta}E_p$ vs. -Log[SDS] for the redox couples are plotted. The concentration at the intersection of two lines is 2.57 mM SDS, and this concentration can be determined as the CMC (relative error: below 0.03%; 2.63 mM SDS by surface tensiometry).

• Parasites, Hosts and Diseases
• /
• v.30 no.4
• /
• pp.323-328
• /
• 1992

Analysis of siR isolates of Trichemenes veginalis was carried out with sodium dodecyl sulfate- polyacrylamide gel electrophoresis (SDS-PAGE) and enzyme-linked immunoelectrotransfer blot (EITB). Trichloroacetic acid-treated antigens of the 6 isolates revealed 25 protein profiles ranging 12~170 kDa of molecular weight in SDS-PAGE. In EITB, the specific immunogenic bands were visualized at 51 kDa and 96 kDa when HY-1 antigen was probed with difFerent mice sera immunized with 6 isolates of T. vaginalis. The banding patterns with different sera showed isolate-to-isolate variability. In EITB, homologous antigen (HY-1) did not show any enhanced response in reacting to homologous antiserum(HY-1) when 6 isolates of T. vaginalis were probed with a single serum (HY-1). It is assumed that the different banding patterns of six isolates show isolate-to-isolate variability and immunogenic common bands in 41, 47, 74 and 9:k kDa on EITB may connote the important significance on immune response in T. vaginalis infection.

• Journal of Soil and Groundwater Environment
• /
• v.18 no.7
• /
• pp.81-89
• /
• 2013

Concerns have been raised over the impact of nano materials on soil and groundwater environment with the increasing attention to the potential applications of carbon nano materials in various fields. Particularly, carbon nano materials introduced into water environment readily make complexes with humic acid (HA) due to their hydrophobic nature, so there have been increasing numbers of studies on the interaction between HA and carbon nano materials. In this study, we investigated the solubility of HA and multiwalled carbon nanotubes (MWCNT) in three different surfactant solutions of sodium dodecyl sulfate (SDS), Brij 30 and Triton X-100, and evaluated whether the HA can be effectively desorbed from the surface of MWCNT by surfactant. The objective of this study was to determine the optimal adsorption condition for HA to MWCNT. Futhermore, sodium dodecyl sulfate (SDS), Brij 30, Triton X-100 were used to elucidate the effect of desorption and separation on adsorbed HA on MWCNT. As a result, HA solution with 12.7 mg of total organic carbon (TOC) and 5 mg of MWCNT showed the highest adsorption capacity at pH 3 reacted for 72 hrs. Weight solubilizing ratio (WSR) of surfactants on HA and MWCNT was calculated. HA had approximately 2 times lower adsorption capacity for the applied three surfactants compared to those of MWCNT, implying that the desorption of HA may occur from the HA/MWCNT complex. According to the results of adsorption isotherm and weight solubilizing ratio (WSR), the most effective surfactants was the SDS 1% soluiton, showing 53.63% desorption of HA at pH 3.

• Applied Chemistry for Engineering
• /
• v.9 no.2
• /
• pp.177-184
• /
• 1998

The contact angle on powder hydrophobic polymer PMMA(polymethylmethacrylate), PVC(poly vinyl chloride) and hydrophilic metal aluminium was measured by wicking method on the base of Washburn equation for water, glycerol, formamide, diiodomethane, 1,1,2,2-tetrabromoethane, 1-bromonaphthalene, acetone, chloroform, benzene, ethanol, methanol, and for anionic surfactant SDS(sodium dodecyl sulfate) and cationic surfactant CATB(cetyl trimethylamonium bromide) aqueous solution with concentrations. The values of ${\gamma}_c$ estimated by Zisman plot and adhesion tension plot for contact angle with organic liquids, SDS, and CTAB aqueous solutions were 43.5, 28.3, and $36.2mNm^{-1}$ for PMMA and 44.2, 25.0, and $34.8mNm^{-1}$ for PVC, respectively. From the results, it was considered that wettability and characteristics of solid surface were transformed by adding surfactant. The surface free energy, ${\gamma}_s$ and its components of PMMA, PVC, and aluminium were determined using harmonic equation.

• Bulletin of the Korean Chemical Society
• /
• v.12 no.6
• /
• pp.686-691
• /
• 1991

Emission quenching of photoexcited tris(${\alpha},{\alpha} '$-diimine)-ruthenium(II) complex cations, $RuL_3^{2+}$ (L: 2,2'-bipyridine, 4,4'-dimethyl-2,2'-bipyridine; 4,4'-diphenyl-2,2'-bipyridine; 1,10-phenanthroline; 5-methyl-1,10-phenanthroline; 5,6-dimethyl-1,10-phenanthroline or 4,7-diphenyl-1,10-phenanthroline) by $Cu^{2+}$, dimethylviologen $(MV^{2+})$, nitrobenzene (NB), and oxygen was studied in aqueous homogeneous and sodium dodecyl sulfate (SDS) micellar solutions. The apparent bimolecular quenching rate constants $k_q$ were determined from the quenching data and life-times of $^{\ast}RuL_3^{2+}$. In homogeneous media, the quenching rate was considerably slower than that for the diffusion-controlled reaction. The decreasing order of quenching activity of quenchers was $NB>O_2>MV^{2+}>Cu^{2+}$. The rate with $Cu^{2+}$ was faster as the reducing power of $^{\ast}RuL_3^{2+}$ is greater. On the other hand, the rates with NB and $O_2$ were faster as the ligand is more hydrophobic. This was attributed to the stabilization of encounter pair by van der Waals force. The presence of SDS enhanced the rate of quenching reactions with $Cu^{2+}$ and $MV^{2+}$, whereas it attenuated the quenching activity of NB and $O_2$ toward $RuL_3^{2+}$. The binding affinity of quenchers to SDS micelle and binding sites of the quenchers and $RuL_3^{2+}$ in micelle appear to be important factors controlling the micellar effect on the quenching reactions.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.4B
• /
• pp.377-382
• /
• 2011

In this study, hydrogen peroxide is stabilized in modified Fenton reaction to improve the soil remediation. Phenanthrene, which is the typical compound in PAHs, was spiked into soil samples to copy the original contaminated site. Anionic surfactant, SDS (Sodium dodecyl sulfate) was used for hydrogen peroxide stabilizer. 4 mM of Fe(II), 5~50 mM of SDS and 102.897 mM of $H_2O_2$ was injected into soil samples which is contaminated by 125 mg/kg of phenanthrene to analyze decomposition rate of phenanthrene in modified Fenton reaction. In condition which SDS was injected 30 mM, decomposition rate of phenanthrene has best efficiency as 95% and in condition which SDS was injected over 30 mM, decomposition rate is lower than SDS 30 mM because SDS enacted as scavenger in the system. Results which assess the change of hydrogen peroxide concentration after injecting hydrogen peroxide stabilizer showed that hydrogen peroxide concentration was 14.6995 mM so that is stabilized at Fe(II) 2 mM condition in 48 hours. On the other hand, hydrogen peroxide is not stable in Fe(III) condition. SDS concentration was fixed and iron concentration was changed 2~8 mM to find out optimize proportion between iron concentration and SDS concentration in modified Fenton reaction. Consequentially, in condition of which Fe(II) 4 mM and SDS 30 mM, reaction has the highest removal rate as 95%.

• Analytical Science and Technology
• /
• v.10 no.6
• /
• pp.427-432
• /
• 1997

A selective method for the determination of iron(III) ion with a sodium dodecyl sulfate(SDS) modified glassy carbon electrode was proposed. It was based on the electrostatic attraction and complexation of the SDS modifier, $(DS^-)_n-Fe^{3+}$. The determination of iron(III) ion was performed by a differential pulse voltammetry(DPV), and the reduction peak potential of $(DS^-)_n-Fe^{3+}$ was +0.466(${\pm}0.002$)V vs. Ag/AgCl. For the determination of iron(III) ion, a linear calibration curve was obtained within the iron(III) ion concentration range of $0.50{\times}10^{-5}{\sim}10{\times}10^{-5}mol/L$, and the detection limit was $0.14{\times}10^{-5}mol/L$. $Cu^{2+}$, $Ni^{2+}$, $Co^{2+}$, $Pb^{2+}$, $Zn^{2+}$, and $Mn^{2+}$ showed little or no effect on the determination of iron(III) ion, respectively. But, ion such as each $CN^- $ and $SCN^-$ interfered seriously.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.5
• /
• pp.726-736
• /
• 2004

In this paper, kinetics of reaction between Bromophenol blue (BPB) and $OH^-$, called fading, has been studied through a spectrophotometric method in the presence of nonionic Triton X-100 (TX-100), anionic sodium dodecyl sulfate (SDS) and cationic dodecyl trimethylammonium bromide (DTAB) surfactants. The influence of changes in the surfactant concentration on the observed rate constant was investigated. The results are treated quantitatively by pseudophase ion-exchange (PPIE) model and a new simple model called "classical model". The binding constants of BPB molecules to the micelles and free molecules of surfactants, their stoichiometric ratios and thermodynamic parameters of binding have been evaluated. It was found that SDS has nearly no effect on the fading rate up to 10 mM, whereas TX-100 and DTAB interact with BPB which reduce the reaction rate. By the use of fading reaction of BPB, the binding constants of SDS molecules to TX-100 micelles and their Langmuir and Freundlich adsorption isotherms were obtained and when mixtures of DTAB and TX-100 were used, no interaction was observed between these two surfactants.

• Korean Journal of Animal Reproduction
• /
• v.16 no.1
• /
• pp.1-6
• /
• 1992

These experiments were undertaken as a basic study to understand the role of cumulus cell on in vitro maturation and fertilization process with identifying the cumulus cell-secreted proteins. By sodium dodecyl sulfate-polyacrylamide gel electrophoresis(SDS-PAGE) and fast protein liquid chromatography(FPLC), the proteins of cumulus cells were identified. The results obtained in these experiments were summarized as follows ; 1. When the proteins secreted from cultured cell for 30 hours were separated by SDS-PAGE, there were a major band (>94,000) and other minor 2 bands with molecular weight ranging 30,000∼67,000 dalton. 2. In addition, the fractionations of these proteins by FPLC were idirectly shown that three bands were hyaluronic acid, chondroitin sulfate, and heparin.