• Journal of the Korean Applied Science and Technology
• /
• v.29 no.1
• /
• pp.54-62
• /
• 2012

In this experiment, the optimum concentration of polyols which were used for making transparent soaps was determined using design of experiment (DOE) method. Dipropylene glycol and 1,3 butylene glycol with short chains enhanced the transparency of soap, however, polyethylene glycol 400, glycerin and diglycerin made the soap opaque. The hardness of soap was increased as increasing the concentration of propylene glycol, diglycerin, dipropylene glycol and polyethylene glycol 400. The hardness, transparency, absorbance of water, and friction solubility could be optimized by controlling the concentration of dipropylene glycol, polyetylene glycol, sugar, and triethanolamine.

• Journal of Korean society of Dental Hygiene
• /
• v.14 no.4
• /
• pp.593-599
• /
• 2014

Objectives : Latex gloves hygiene is the most effective method to prevent infection of microorganisms and to reduce the incidence of cross infections. The aim of this study was to compare the bacteria reduction ratio of cleansing with water, liquid soap and alcohol gauze. Methods : The left side glove was the control group and the right side was the experimental group. The experimental group washed hand with water, soap, and alcohol gauze. The hand plate was inoculated by the hand and inoculated for 24 hours in $35^{\circ}C$. Results : Washing with water showed that CFU of control group was 1116.9 and that of experimental group was 302.8. Hand washing by water reduced 74.3% of bacteria. Liquid soap revealed that CFU of control group was 619.9 and that of experimental group was 8.3. Hand washing by liquid soap reduced 97.5% of bacteria. Alcohol gauze included 875.2 CFU in control group and 5.8 CFU in experimental group. Washing by alcohol gauze reduced 99.5% of bacteria. Conclusions : Based on the results, the most effective latex gloves cleansing method was recommended as the standardized hand washing with the liquid hand soap and alcohol gauze. The results can be used to improve training strategies for enhancing glove hygiene practice in dental clinic.

• Journal of Sericultural and Entomological Science
• /
• v.47 no.1
• /
• pp.36-40
• /
• 2005

This studies were carried out to develop the new silk degumming method by elelectrolyzed alkaline water on the silk degumming process. Using to this method, it could be collect pure sericin from the degumming water, because the degumming water by elelectrolyzed alkaline water was not contaminated by chemicals including soap. The range of elelectrolyzed alkaline water was pH 11.5 to 11.7 and maintained the first value for 8 days under the cool and closed conditions. The degumming ratio of silk was higher in elelectrolyzed alkaline water(pH 11.5~11.7)than that of soap and alkaline bath. When the pH value of elelectrolyzed alkaline water was adjusted at pH 11.0, the degumming ratio of silk was similar to that of soap and alkaline degumming. After degumming the pH value of degumming water decreased largely in the elelectrolyzed alkaline water compared to that of soap and alkaline bath. The tenacity and elongation of degummed silk by elelectrolyzed alkaline water was almost same those of soap and alkaline degumming for 90 min.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.626-626
• /
• 2015

본 연구에서는 하천공간정보의 웹서비스를 위해 SOAP(Simple Object Access Protocol) API 및 REST(Representation State Transfer) API로 제공하는 HydroG-OneFlow 웹서비스를 개발하였다. HydroG-OneFlow는 GML 기반의 서비스를 제공하며 GetBasin, GetGeoVariable 및 GetData 등의 기본서비스로 구성된다. GML은 GIS S/W의 벡터 GML 포맷과 공간정보 오픈플랫폼 서비스인 브이월드 데이터 API에서 제공하는 GML 포맷을 참고하여 하천공간 벡터정보를 제공할 수 있도록 GML을 구성하였다. GDM 공간 데이터에 대한 벡터정보 ML 수용 수준을 향상시킬 수 있도록 벡터구조의 점, 선, 면 정보에 대하여 GML의 PointPropertyType, CurvePropertyType, SurfacePropertyType을 도입하였다. 또한 일반적인 공간자료에서는 Multi 객체에 대한 지원도 필요하다. 현 GDM 데이터베이스에서도 OGC 표준의 MultiPoint, MultiLineString, MultiPolygon을 지원하고 있다. 이를 위하여 GML의 상응 요소인MultiPointPropertyType, MultiCurvePropertyType, MultiSurfacePropertyType을 하천공간정보 벡터 스키마에 도입하여 활용하였다. 클라이언트 서버 통신은 메시지 교환프로토콜인 SOAP을 사용하여 서버의 객체를 직접 호출하여 이루어진다. 서버는 서버의 제공 서비스를 WSDL(Web Service Description Language)를 통하여 게시하고 클라이언트는 이 기준(Criteria)을 참고하여 접근한다. GetData의 경우 Type(GRID or VECTOR), GDM(Geospatial Data Model) 여부(true or false), LayerName, BasinID, GenTime을 인자로 받아 GeoData에서 검색된 정보를 반환한다. SOAP버전은 1.1과 1.2를 지원하여 접근하는 클라이언트에서 선택할 수 있도록 개발하였다.

• Journal of Convergence for Information Technology
• /
• v.11 no.5
• /
• pp.206-214
• /
• 2021

The aim of this study was to investigate the effect of face wash with ginseng cold process (CP) soap. In order to remove external environmental factors, skin changes were examined immediately after 10 minutes of face wash. The same water and towel were used at the same place. As a control group, the cases of washing with water without using cleanser and with foam cleanser (F/C), which is a popular commercial product, were set. In the case of water washing, there was a significant decrease in pores and pigmentation, but the significance was small. In the case of F/C washing, there was a very significant decrease in pores and pigmentation, but the loss of moisture was rapid. In the case of ginseng cp soap, pores and pigmentation were significantly reduced, while moisture loss was negligible. Ginseng cp soap is considered as a form of face wash that is suitable for skin care.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.548-548
• /
• 2015

과거 1990년대에 인터넷 이용이 전 세계로 확산되면서 World Wide Web를 이용하여 다양한 웹 서비스 기술의 구현 및 유통은 현재에도 개발되고 있다. 일반적으로 오늘날의 서비스는 XML 및 인터넷을 통하여 웹 서비스로 구현한 응용프로그램간의 연동을 가능하게 하는 기반기술이다. 이는 단순 객체 접근 프로토콜(SOAP), 웹 서비스 기술 언어(WSDL), 전역 비즈니스 레지스트리(UDDI) 등의 표준 기술을 사용하여 네트워크에 연결된 다른 컴퓨터 간의 분산 컴퓨팅을 지원하는 소프트웨어 및 기술이다. 이러한 웹 서비스의 발전으로 웹 서비스의 성능이 웹 서비스 제공자의 성패를 좌우하게 되고, 제공하고 있는 웹 서비스에 대한 검증이 필요하게 되었다. 웹 서비스에 대한 검증은 미국 Bloor NA(Bloor Research-North America)에서 웹 서비스 아키텍처의 단점을 발표하여 서비스의 품질과 신뢰성 및 개선점에 대하여 제시되어 활발한 연구가 진행 중에 있다. 그러나 사용자 관점에서 웹 서비스의 성능을 측정하고, 단순한 서비스 제공자의 서비스 검증 목적만이 아닌 서비스 제공자의 성능을 서비스 사용자에게 제공하는 검증 방법에 관한 연구가 많지 않은 실정이다. 하천공간정보에 대하여 웹 서비스 방식 중 통신 프로토콜인 HTTP 등을 이용한 인터넷상의 메시지 교환을 가능하게 하는 통신 프로토콜인 SOAP 및 WWW와 같은 분산 하이퍼미디어 시스템을 위한 소프트웨어 아키텍처의 한 형식인 REST(Representational State Transfer)를 실행하여 이에 따른 검증 프로세스를 수립하였다. 하천공간정보 웹 서비스에 대한 테스트 시나리오는 응답시간, 임계성능, 이용가능성, 신뢰성 및 접근성에 대하여 검증하며 하나 이상의 웹 서비스들 간의 호환성 표준의 준수 여부와 상호 운용 가능 여부를 테스트 하는 상호운용성 테스트, 신뢰성 메시징 및 분산 환경에서의 트랜잭션 처리 성능을 검증하는 웹 서비스 프로세스 품질 테스트를 실시하는 방안을 도출하고자 한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.3304-3311
• /
• 2014

In the saponification to manufacture plant fatty acid hard soap, the drying process is required for its water evaporation and hardness. This study mixed it with essential oil(E.O) with high volatility instead of adding synthetic flavor. And it comparatively observed the duration of flavor changing to the additive ($TiO_2$) and the drying period of the major flavor component (Linalool, Linalyl acetate) in the essential oil (Lavender E.O) contained in the soap during the soap manufacture by using GC-MS. Advanced researches have mostly dealt with the utility of plant hard soap, and those related with the volatility of flavor have been hardly conducted. Regarding the volatility of linalool contained in the soap, the soap mixed with $TiO_2$ showed a higher reduction ratio up to the 12th week; however, at the point of the 20th week, it reduced to a similar level. Although Linalyl acetate did indicate a slight difference according to the mixture of $TiO_2$, the volatility was shown similar up to the point of the 20th week. During the 20 weeks of drying, the residual rate of linalool was found to be higher than that of Linalyl acetate regardless of the mixture of $TiO_2$. It has been found that the flavor component of lavender essential oil with the duration of two or so days at the room temperature remains for 20 weeks (or 5 months) when it is manufactured through the mixture of plant fatty acid hard soap.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.5 no.1
• /
• pp.9-14
• /
• 1981

The influence of laundering conditions on calcium deposition on the fabric was studied by repeated laundering the cotton fabric with soap in the hard water of 200 P.P.M. $CaCO_3$. The experimental variables were: 1) soap concentrations ($0.06\%$, $0.13\%$, $0.25\%$), 2) water contents in the fabric after hydroextraction. ($65\%$, $150\%$, $315\%$), 3) builders (Na-EDTA, sodium carbonate, sodium metasilicate), 4) washing cycle (5, 10, 15, 20 cycles). The fabric was washed for 15 minutes at $23\pm1^{\circ}C$ in a washing machine (Model; Gold Star Wp-2005) under the similar conditions with those of home laundering, and rinsed 5 times for 5 minutes. The amount of calcium deposits on the fabric was determined by the EDTA-Back titration method described by Wasserman and Basch. Results of this study were follows: 1) The amount of calcium deposits on the fabric increased with increasing wash cycles. 2) During the rinsing process, residual calcium content on the fabric increased with water content in the fabric after hydroextraction. 3) The amount of calcium deposits on the fabric decreased with the increasing soap concentration above the equivalent amount of calcium ion content in the water. 4) Sequestering agents and alkaline builders influenced the amount of calcium deposits on the fabric. The amount of calcium deposits on the fabric was in the order of sodium metasilicate, sodium carbonate, nonbuilder, and EDTA.

• The Journal of Korean Academy of Prosthodontics
• /
• v.35 no.2
• /
• pp.330-343
• /
• 1997

Extraoral maxillofacial prostheses are essential for restoring facial structures that are lost as a result of congenital missing, injuries from accidents, surgical treatments of head and neck cancer. Recently, silicone is the most useful material for this purpose and is more advantageous than other maxillofacial prosthetic materials. However, there are some problems for long-term usage of silicone prostheses due to tear and color change. These are major contributing environmental factors to those problems that are such as ultraviolet light, cleansing agents, changes in humidity and successive adhesion and removal. The aim of this study is to evaluate the physical properties and color changes of maxillofacial prosthetic silicone material by those environmental factors using A-2186 silicone material (Factor II, USA) and two pigments, cadmium yellow medium and cosmetic red. Aluminium molds were fabricated according to the ASTM No. D412 & D624 specifications and resulted specimens from molds were fabicated and treated as follows. Control group and experimental I group were fabricated with 0.1% wt. pigment mixing in silicone elastomer and II-1 group, II-2 group of experimental II group were fabricated with 0.2%, 0.3% wt. pigment mixing in silicone elastomer, respectively. Control group was kept in darkroom at room temperature, I-1 group was kept under natural sunlight during 1week, I-2 group was soaked in 20% soap water during 1wk. I-3 group was successively adhered and removed 200 times on inner region of arm using Daro adhesive-33. Experimental II groups were kept in darkroom at room temperature. Instron universal testing machine was used to measure the % elongation, tensile strength, tear strength of control, experimental I, II groups and reflectance spectrophotometer(COLOR EYE-3000, Macbeth, USA) was used to measure the color differences between control group and experimental I group. The results were as follows : 1. When compared with control group, natural weathering group and 20% soap-water soaking group had no significant differences in % elongation(p>0.05). 2. 200 times successive adhesion and removal group, 0.2% wt. pigment group and 0.3% wt. pigment group had significant decreases in % elongation(p<0.05). 3. Natural weathering group, 20% soap-water soaking group and 200 times successive adhesion and removal group had no significant differences in tensile strength (p>0.05). 4. 0.2%, 0.3% wt. pigment groups had significant decreases in tensile strength(p<0.05). 5. Values of all experimental groups were decreased in tear strength. and 200 times successive adhesion and removal group had significant decrease in tear strength(p<0.05). 6. Natural weathering group and 20% soap-water soaking group had significant color differences(${\Delta}E$) and it could be detectable to naked eye(p<0.05). 7. Color differences between control group and 200 times adhesion and removal group were not detectable to the naked eye (${\Delta}E<1.0$).

• Textile Coloration and Finishing
• /
• v.14 no.4
• /
• pp.249-258
• /
• 2002

Natural silk is formed by two proteins : the crystalline fibroin (inside the silk thread) and amorphous sericin (as a tube outside the thread). The degumming process is used to eliminate the external sericin prior to dyeing ; generally it makes use of soaps at about pH 10. Sericin is the protein constituent that "gums"together the fibroin filaments of cocoon silk. It constitutes about 25% of the weight of the cocoon, is soluble in hot water and "gels" on cooling. The removal of sericin from raw silk, known as degumming, is a simple but important process usually employing hot dilute soap or alkaline solution and occasionally dilute acids or enzymic methods. During degumming, alkali is taken up by the sericin and the free acid from the soap is formed ; this may be deposited on the fiber, reducing the rate of degumming and protecting it from hydrolysis. Alkali is often added to maintain or restore the pH of the baths, but it is rarely used alone, since it leaves the silk rather harsh in handle. If complete sericin removal is required as for printing, sodium carbonate may be added. If the pH of the bath exceeds 11, the fibroin is attacked. Recently, According to the development of electrolysis, we can be obtained the electrolytic reduction water(above pH 11.5) and electrolytic oxidation water (below pH 3). The aim of this work was to study a degumming process using electrolytic water and a possibility of sericin recovery. The new degumming process used electrolytic water operates at $95^\circ{C}$ for 2hr. without any reagents. The wastewater of this process are formed by a solution of sericin in water. This conditions suggest the study of a possible recovery of this protein (sericin) which has an amino acid composition suitable for many used in cosmetics, textile finishing agents, animal feeding, etc. The degumming process using electrolytic water is available to reduce treatment costs and pollute and at the same time to recover sericin.