• Applied Biological Chemistry
• /
• v.38 no.1
• /
• pp.83-89
• /
• 1995

Changes in physical, chemical and microbiological characteristics of rice-doenjang prepared with two different methods with or without soak treatment were investigated during 60 days of aging at $32^{\circ}C$ and $15^{\circ}C$. The pH of soak-treated rice-doenjang decreased slowly, but that of nonsoak-treated rice-doenjang decreased rapidly at the initial aging stage with the aging temperature of $32^{\circ}C$, resulting in pH 5.1 after the 60 days of aging time. Reducing sugar contents increased up to the $30{\sim}50$ days of aging time and decreased thereafter. The contents of soluble nitrogen, formol nitrogen, ammoniacal nitrogen and amino nitrogen were more affected by preparation methods than by aging temperatures. Color values depended not only on preparation methods but also on aging temperatures. There were no significant differences in the bacterial counts of rice-doenjang, while apparent differences in the yeast and mold counts by aging temperatures were observed. These results suggested that the properties of soak-treated rice-doenjang were less changed than those of nonsoak-treated rice-doenjang by aging time and temperature. And, with a view point of nitrogen compounds, aging time could be reduced by soak treatment.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.3
• /
• pp.39-50
• /
• 1999

This research was carried out to investigate the development of fire-retardancy treatment technology and performance evaluation of fire-retardant treated plywoods. Radiata pine, keruing, dillenia, calophyllum and terminalia veneers were treated by normal(conventional) pressure soak(NPS) and vacuum-pressure-soak(VPS) using 20% water solution of diammonium phosphate. Then, 4.8mm thick, 3ply plywoods were fabricated with combination of fire-retardant treated, untreated or water-immersion types and several composition types of radiata pine and keruing veneers, i,e. the uniform and the mixed types in species composition, and the homogenious and the alternate layer types in veneer treatment. In composed species, the retention and the treatment effects of fire-retardant chemicals III radiata pine was still greater than those of keruing. The effect of VPS treatment was larger than that of NPS treatment, however, adhesive bonding strength and bending strength of plywoods treated by these two methods were not necessarily lowered, compared to those of untreated plywood. And also, fire endurance performance of the urea melamine resin-bonded plywood was greater than that of the phenol resin-bonded plywood. In result, the appropriate combination in veneer species and layer as well as alternate fire-retardant treatments would be more efficiently available in service.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.11a
• /
• pp.124-127
• /
• 2003

Sewage sludge and clay used as raw materials in the study. Green aggregates contain different contents by dried weight of the sewage sludge, up to 80 percent is manufactured and burning conditions of soak temperature, soak time and rate of temperature increase. influence of burning condition and mixing ratio on specific gravity of burned aggregate are discussed. The appropriate burning condition to all aggregates is evaluated. Aggregates result form the thermal treatment get specific gravity under 0.8, water absorption fewer than 7.5 percent, and aggregate crushing value from 28 to 53. As the result, aggregates can be available as the lightweight aggregate for non-structural concrete.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05b
• /
• pp.157-160
• /
• 2005

The purpose of this study is to efficiently treat the sewage sludge discharged from sewage treatment plants and evaluate the feasibility of the manufacture of lightweight aggregates(LWA) using a large quantity of sewage sludge and inorganic waste binder ;f1y-ash, waste-stone, tailing, phosphogypsum. Then they were burned in different soak temperatures from 1190$^{circ}C$ to 1290$^{circ}C$ with fixed soak time and heating rate at 5 minutes and 20$^{circ}C$/min respectively in order to produce lightweight aggregate (LWA). Experiment were generated to evaluate the quality of LWA as well as the relationship between burning condition and product's quality.

• Journal of Oriental Medical Thermology
• /
• v.5 no.1
• /
• pp.69-77
• /
• 2006

Purpose : There are many patients with cold hypersensitivity who want oriental medicine treatment. But there has been no study of acupucture treatment effect on patients. So we examined effects of acupuncture treatment at different acupuncture points and compared results of 1st cold stress test and 2nd cold stress test. Method : 8 patients with hand cold hypersensitivity applied for this study. To rule out an bias, we excluded the patients with skin diseases, spinal nerve disease of cervial spine, external wounds. We measured body temperature with D.I.T.I. We performed cold stress test(CST) by 6 thermographic observation using D.I.T.I ; the 1st was taken after 15 minutes-resting, the 2nd was immediately taken after 1 minute soak in $20^{\circ}C$ water, the 3rd was taken at 10 minutes after the soak, and after a week, the 4th was taken after 15 minutes resting, the 5th was immediately taken after 1 minute soak in $20^{\circ}C$ water, the 6th was taken after 10 minutes with acupunture treatment. There were two groups of patients. First group was acupuncture that performed acupuncture therapy on distal points. Second group was acupuncture that performed acupuncture therapy on proximal points. We compared first CST and second CST recovery rate result. Results : The recovery rate at distal points acupuncture therapy was higher than before of that. but not significantly different. The recovery rate at proximal points acupuncture therapy was significantly higher than before of that. The recovery rate of both the back, the palms, all fingers of after proximal acupuncture therapy was significantly higher than before of that. Conclusions : Acupuncture could be effective therapy method on cold hypersensitivity, especially using proximal acupuncture points could be good at cold hypersensitivity patients. This was pilot study of very small samples, results had limitations. For further results more examine would be needed.

• The Korean Journal of Mycology
• /
• v.18 no.2
• /
• pp.89-96
• /
• 1990

This study was conducted to find out the effects of Thiabendazole on controlling green mold causing serious damage to oyster mushroom, Pleurotus spp. during the cultivation. In vitro, the strains of oyster mushroom such as ASI 2018, 2072 and 2016 were inhibited by 500 ppm of the fungicide, but the strain of ASI 2001 and ASI 2070 was inhibited by 100 and 500 ppm on oatmeal agar, respectively. The mycelial growth of the oyster mushroom started to be inhibition by soak treatment at a 0.2g/1000 ml aqueous solution of the fungicide. When the oyster mushroom and green mold inoculated both or separately on the substrates of soak treatment, the green mold did not grow at all, but the oyster mushroom grown well. The maximum control effect of the green mold showed when $2g/m^2\;and\;5g/m^2$ of the fungicide was sprayed on the surface of substrates before pasteurization. The highest yield of the sporophores of oyster mushroom was obtained from $5g/m^2$ treatment.

• Korean Journal of Medicinal Crop Science
• /
• v.16 no.2
• /
• pp.106-111
• /
• 2008

This study was carried out to elucidate the influence of gibberellin soak and seed dressing with Toros wp. on the dehiscence of Eleutherococcus senticossus seeds. $GA_3$ treatment was effective on promoting after-ripening seed of Eleutherococcus senticossus whose concentration was higher until $500\;mg{\cdot}L^{-1}$, after-ripening period became shorter. But rotting percentage increased gradually up above $500\; mg{\cdot}L^{-1}\;GA_3$After all, $300\;mg{\cdot}L^{-1}\;GA_3$ was the most effective treatment for promoting after-ripening seed. Dressing treatment with Toros wp. on seeds reduced the dehiscent rate of E. senticosius. by suppressing activity of fungi living on the endocarp surface of seed.

• Korean Journal of Plant Resources
• /
• v.19 no.2
• /
• pp.204-208
• /
• 2006

Soybean sprout decay during its culture should be one of serious problems. The study was carried out to clarify the effect of water imbibition and acetic acid treatments on growth and morphological characters of the soybean sprouts. The soybean seeds of 3 cultivars (cv. Eunhakong, Pungsannamulkong and Junjery) imbibed in pure water or 0.l% acetic acid for 3 minutes before soaked for 6 hours into 1 ppm BA solution and aerated for 3 hours immediately before 6 day culture. On the 6th day, the sprouts were classified into 4 categories on the base of hypocotyl length; > 7cm, 4 to 7cm, > 4cm and not germinated and seed floating rate, their morphological characters, fresh fraction weights and productivity were measured. The best water imbibition for seed cleaning was to soak the seeds for 5 minutes and then to aerate soak them for 40 minutes. In Pungsannamulkong and Junjery, percentage of the sprouts with hypocotyls of longer than 4 cm was higher in water imbibition than in acetic acid treatment for seed disinfection although in Eunhakong there was no significant difference between the two treatments. Eunhakong and Junjery had greater lateral root formation rate and its number per sprout in water imbibition than in acetic acid treatment but Pungsannamulkong showed reverse result. Eunhakong and Pungsannamulkong, furthermore, had more total fresh weight in acetic acid treatment than in water imbibition but Junjery showed reverse result, although there was no significant difference between the two treatments in productivity of mass production system.

• Archives of Pharmacal Research
• /
• v.27 no.8
• /
• pp.834-839
• /
• 2004

In human neuroblastoma SK-N-BE(2) cells undergoing apoptotic death induced by ginsenos-ide Rh2, a dammarane glycoside that was isolated from Panax ginseng C. A. Meyer, caspase-1 and caspase-3 were activated. The expression of Bax was increased in the cells treated with ginsenoside Rh2, whereas Bcl-2 expression was not altered. Treatment with caspase-1 inhibi-tor, Ac-YVAD-CMK, or caspase-3 inhibitor, Z-DEVD-FMK, partially inhibited ginsenoside Rh2-induced cell death but almost suppressed the cleavage of the 116 kDa PARP into a 85 kDa fragment. When the levels of p53 were examined in this process, p53 accumulated rapidly in the cells treated early with ginsenoside Rh2. These results suggest that activation of caspase-1 and -3 and the up-regulation of Bax are required in order for apoptotic death of SK-N-BE(2) cells to be induced by ginsenoside Rh2, and p53 plays an important role in the pathways to promote apoptosis.

• The KSFM Journal of Fluid Machinery
• /
• v.14 no.6
• /
• pp.85-90
• /
• 2011

Recently, many high elevation fountain are constructed for the beauty of beach landscape. Typically, a fountain has several nozzles that shoots water upwards or at an angle into the air. But unfortunately, the weather and wind can cause the water soak nearby walkways and pedestrians. Therefore, in this study, a mathematical model of high elevation fountain is suggested to predict the actual travelling distance of water droplet by the wind. To simplify our treatment of the water flow and to avoid issues such as fluid dynamics and surface tension, we have adopted a particle model for the fountain water. The particles are assumed not to interact with each other, and do not deform during their flight through air.