• 대한기계학회논문집A
• /
• 제20권2호
• /
• pp.481-487
• /
• 1996

A snapping-beam microswitch has been designed, fabricated and tested. From a design analysis, necessary and sufficient conditions for a snap-through switching fouction have been derived for a clamped shallow beam. The necessary condition has resulted in a geometric relation, in which the ratio of beam thickness to initial beam deflection plays a key role in the snapping ability. The sufficient condition for the snapping action has been obtained as a function of the inertia force due to applied acceleration, and the electrostatic force, adjustable by an inter-electrode voltage. For experimental investigations, a set of microbeams of silicon dioxide/$P^+$silicon bimorphs have been fabricated. Geometric size and mechanical behavior of each material film have been measured from on-chip test structures. Estimated and measured characteristics of the fabricated devices are compared.

• Structural Engineering and Mechanics
• /
• 제32권4호
• /
• pp.501-516
• /
• 2009

This paper aims to study the large deflections of variable-arc-length elastica subjected to the terminal forces (e.g., axial force and torque). Based on Kirchhoff's rod theory and with help of Euler parameters, the set of nonlinear governing differential equations which free from the effect of singularity are established together with boundary conditions. The system of nonlinear differential equations is solved by using the shooting method with high accuracy integrator, seventh-eighth order Runge-Kutta with adaptive step-size scheme. The error norm of end conditions is minimized within the prescribed tolerance ($10^{-5}$). The behavior of VAL elastica is studied by two processes. One is obtained by applying slackening first. After that keeping the slackening as a constant and then the twist angle is varied in subsequent order. The other process is performed by reversing the sequence of loading in the first process. The results are interpreted by observing the load-deflection diagram and the stability properties are predicted via fold rule. From the results, there are many interesting aspects such as snap-through phenomenon, secondary bifurcation point, loop formation, equilibrium configurations and effect of variable-arc-length to behavior of elastica.

• 한국강구조학회 논문집
• /
• 제13권5호
• /
• pp.587-597
• /
• 2001

연속체 쉘을 이산화한 구조시스템은 돔형 구조물을 만들기 위해 많이 이용되고 있으며, 이러한 구조물은 하중레벨이 어느 임계값에 도달하면 구조물의 형상에 따라 뜀좌굴(snap-through) 또는 분기좌굴(bifurcation)에 의한 불안정 현상이 일어난다. 케이블 돔의 구조거동 특성은 초기장력 및 외력에 다라 비선형성이 강하게 나타나며 또한 초기조건에 매우 민감하게 반응한다. 본 연구에서는 케이블 돔의 불안정 문제를 파악하기 위해 Geiger 모델을 대상으로 하여 초기 장력도입에 의한 형상결정 문제를 다루고 이를 이용하여 완전형상 및 초기형상 불완전을 도입하여 외력에 의한 불안전성현상을 규명한다.

• 한국공간구조학회논문집
• /
• 제14권3호
• /
• pp.47-56
• /
• 2014

This paper investigates the characteristics of unstable behaviour and critical buckling load by joint rigidity of framed large spatial structures which are sensitive to initial conditions. To distinguish the stable from the unstable, a singular point on equilibrium path and a critical buckling level are computed by the eigenvalues and determinants of the tangential stiffness matrix. For the case study, a two-free node example and a folded plate typed long span example with 325 nodes are adopted, and these adopted examples' nonlinear analysis and unstable characteristics are analyzed. The numerical results in the case of the two-free node example indicate that as the influence of snap-through is bigger; that of bifurcation buckling is lower than that of the joint rigidity as the influence of snap-through is lower. Besides, when the rigidity decreases, the critical buckling load ratio increases. These results are similar to those of the folded-typed long span example. When the buckling load ratio is 0.6 or less, the rigidity greatly increases.

• 대한토목학회논문집
• /
• 제10권2호
• /
• pp.11-22
• /
• 1990

본(本) 논문(論文)에서는 보존력(保存力) 및 비보존력(非保存力)을 받는 구조물(構造物)의 비선형(非線形) 유한요소해석(有限要素解析)을 수행(遂行)하기 위하여 기존의 하중증분법(荷重增分法)과 변위증분법(變位增分法)을 효율적(效率的)으로 결합(結合)시킨 수치적(數値的)인 해석(解析)알고리즘을 제시(提示)하였다. 제안(提案)한 알고리즘은 하중증분(荷重增分)과 변위증분(變位增分)이 자동(自動) 생성되도록 하므로써 Snap-Through, Turning-Back과 같은 비선형(非線形) 거동(擧動)을 포함(包含)하는 다양(多樣)한 평형경로(平衡經路)들을 추적(追跡)할 수 있었다.

• 디자인학연구
• /
• 제20권3호
• /
• pp.289-298
• /
• 2007

지체가 부자유한 사용자가 컴퓨터를 이용하여 정보를 쉽게 입력하거나, 쉽게 인지할 수 있도록 지원하는 커뮤니케이션 수단으로서 주목받고 있는 것이 EGI(Eye Gaze Interface)시스템이다. 그러나 EGI는 "주시점 탈(脫) 현상(목표 주시점으로부터 실제의 주시점이 벗어나는 현상)" 의 발생으로 인하여 목표정보를 입력하거나 인지하는데 많은 심리적, 생리적 부담을 가중시키는 것이 현실이다. 본 연구는 EGI의 문제점으로서 지적되고 있는 "주시점 탈(脫) 현상" 의 해결방안에 초점을 두고, 누구든지 간단히 조작할 수 있는 인터페이스를 제안, 고찰하였다. "주시점 탈(脫) 현상" 의 원인규명 및 제안하는 인터페이스의 유효성 검증을 위하여, 실험 툴(흡착효과를 부여한 한국어 입력인터페이스)을 제작, 평가하였으며, 심리적 평가(주관평가)와 생리적 평가(뇌파측정)를 실시하여, 흡착효과를 적용했던 경우가 흡착효과를 적용하지 않았던 경우 보다 문자입력이 쉽고 생리적 부담이 적을 수 있다는 가능성을 발견할 수 있었다. 본 연구는 이러한 결과를 통하여, 선천적이든 후천적이든 물리적 핸디캡으로 인하여 커뮤니케이션에 장애를 가지고 있는 사용자들에게도 원활한 커뮤니케이션을 할 수 있는 시스템 개발 지원 가능성에 길을 열었다고 생각하며, 그 효용성에 대해서도 시사하는 바가 있음을 발견할 수 있었다.

• 생명과학회지
• /
• 제14권4호
• /
• pp.670-675
• /
• 2004

본 연구에서 인간의 백혈병세포주인 Jurkat T 세포에서 인터페론 감마(INF-${\gamma}$ 유전자의 methylation에 대한 S-nitroso-N-acetylpenicillamine (SNAP), 프로스타글란딘 $E_2$ (PG $E_2$) 그리고 dibutric cyclic AMP (dbcAMP)의 효과를 조사하였다. 인터페론 감마 유전자의 프로모터기능에 아주 중요한 디뉴클레오티드인 CpG는 SNAP, PG $E_2$, 그리고 dbcAMP를 각각 처리하였을 때 methylation되었다. PG $E_2$에 의해서 유도된 그 methylation은 아데닐산 사이클라제의 저해제의 하나인 2',5'-dideoxyadenosine (DDA)에 의해서 억제되었지만, SNAP에 의해서 유도된 methylation은 DDA에 의해서 억제되지 않았다. PG $E_2$나 dbcAMP를 처리한 세포에서 일산화질소(NO)의 생성의 증가는 나타나지 않았으며, PG $E_2$나 dbcAMP에 의해 유도된 인터페론 감마유전자의 methylation도 일산화질소합 성효소의 저해제인 $N^{G}$ -methyl-L-arginine (L-NMMA)에 의해서 억제되지 않았다. 따라서 인간의 Jurkat T 세포에서 PG $E_2$에 의한 인터페론 감마 유전자의 발현 억제는 세포내의 cAMP생성경로를 통한 인터페론 감마 유전자의 methylation과 연관되어있으나 일산화질소의 생성경로와는 무관한 것으로 보인다.화질소의 생성경로와는 무관한 것으로 보인다.

• Steel and Composite Structures
• /
• 제27권1호
• /
• pp.13-25
• /
• 2018

The main objective of this study is to develop a dual approach for geometrically nonlinear finite element analysis of plane truss structures. The geometric nonlinearity is considered using the Total Lagrangian formulation. The nonlinear solution is obtained by introducing and minimizing an objective function subjected to displacement-type constraints. The proposed method can fully trace the whole equilibrium path of geometrically nonlinear plane truss structures not only before the limit point but also after it. No stiffness matrix is used in the main approach and the solution is acquired only based on the direct classical stress-strain formulations. As a result, produced errors caused by linearization and approximation of the main equilibrium equation will be eliminated. The suggested algorithm can predict both pre- and post-buckling behavior of the steel plane truss structures as well as any arbitrary point of equilibrium path. In addition, an equilibrium path with multiple limit points and snap-back phenomenon can be followed in this approach. To demonstrate the accuracy, efficiency and robustness of the proposed procedure, numerical results of the suggested approach are compared with theoretical solution, modified arc-length method, and those of reported in the literature.

• 대한두개안면성형외과학회지
• /
• 제10권1호
• /
• pp.19-22
• /
• 2009

Purpose: There are various approaches for open reduction surgery for orbitozygomatic fractures. After the incisions are performed, patients might have various complications. In this point of view, we conducted a retrospective study of the usability of infraorbital incision on elderly patients, generally more vulnerable to scleral show and ectropion. Methods: In this study, 20 patients who are relatively more vulnerable to scleral show and ectropion through snap-back test having infraorbital incision were reviewed. We monitored the duration of the surgery, and complications resulted from the incision. We evaluated the scars with the researcher's observations and with the patient's level of satisfaction on a scale of 1 to 5. Results: On average, 5 minutes was spent between the skin incision and the fracture exposure. No case of scleral show and ectropion occurred. One year follow-up observation revealed 4 cases of visible scars, 9 cases of barely visible scars, and 7 cases of invisible scars. The subjective satisfaction level of the patients' scar is an average of 4.0. Conclusion: Infraorbital incision has many advantages. First, it can reduce the complications such as scleral show and ectropion. Second, it can shorten the operation time. Third, it can diminish incision-related scars.

• International Journal of CAD/CAM
• /
• 제6권1호
• /
• pp.173-181
• /
• 2006

In this paper, an integration framework of Geometric Constraint Solving Engine and AutoCAD is presented, and a dynamic geometric constraint system is introduced. According to inherent orientation features of geometric entities and various Object Snap results of AutoCAD, the' proposed system can automatically construct an under-constrained geometric constraint model during interactive drawing. And then the directed constraint graph in a geometric constraint model is realtime modified in order to produce an optimal constraint solving sequence. Due to the open object-oriented characteristics of AutoCAD, a set of user-defined entities including basic geometric elements and graphics constraint relations are defined through derivation. And the custom-made Object Reactor and Command Reactor are also constructed. Several powerful characteristics are achieved based on these user-defined entities and reactors, including synchronously processing geometric constraint information while saving and opening DWG files, visual constraint relations, and full adaptability to Undo/Redo operations. These characteristics of the proposed system can help the designers more easily manage geometric entities and constraint relations between them.