• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.14 no.5
• /
• pp.462-471
• /
• 1989

Two-dimensional median filters were affectively supprssing the noise in image processing with the adge smearing decreased. However, if the window were large as necessary in noise then the filter had tendency to cut off corners. An estimate of gradient was used to decide how the ouputs of the filters were calculated. For parallel to the gradient direction we used edge preserving median operation and orthogonal to that averaging subfilters over which medians were then chosen. Four different algorithms were introduced.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.86.3-86.3
• /
• 2017

2개의 케플러 접촉쌍성인 KIC 8804824와 KIC 10229723의 초정밀 측광 자료를 가장 최신 버전의 윌슨-디비니 코드로 분석하여 정밀한 측광 해를 산출하고, 그 잔차들을 매우 자세하게 조사하였다. 두 개의 케플러 접촉 쌍성은 제2식이 편평한 광도곡선을 가지고 있어, 이 두 쌍성은 W UMa형 A sub-group에 속한다. 또한, 광도곡선의 모양이 매우 대칭이며, 시간에 따른 변화가 크지 않다. 두 별의 측광 해를 살펴 본 결과, 두 별은 모두 주성의 온도가 부성의 온도보다 높고, 0.2보다 작은 극단적인 질량비와 90도에 거의 가까운 궤도경사각을 갖고 있다. 무엇보다도, 두 별의 측광 해의 잔차에서 공통적으로 전 위상에 걸쳐 모형화 되지 않은 특이한 구조를 발견하였다. 이 구조는 phase smearing 효과를 고려하더라도 그 구조의 모습만이 약간 달라질 뿐, 구조의 진폭에는 크게 영향을 미치지 않는 것을 발견하였다. 흥미롭게도 이 현상은 두 별의 주기가 각각 다름에도 불구하고 공통적으로 나타나며, 관측된 전 쿼터에 대해 나타난다. 이 현상의 가능한 원인에 대해 논의한다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.10a
• /
• pp.101-105
• /
• 1992

Machined graphite/epoxy composite surfaces were studied by using SEM(Scanning Electron Microscopy). surface profilometry and its analysis to determine suitable surface describing parameters for machined unidirectional and laminate composite surface. The surface roughness and profile are found to be highly dependent on the fiber layup direction and the measurement direction. Machined unidirectional and 0.deg. 45 .deg. 90 .deg. plies in laminate composite surface profiles are found to be Gaussian in the direction of machining. Since there exist bare fibers without matrix smearing in 0 .deg. ply, higher surface roughness values were found in this orientation. It was possible to machine 90 .deg. and -45 .deg. plies due to the adjacent plies, which were holding those plies. It was found that the microgeometrical variations in terms of roughness parameters Ra without Dy (maximum Damage Depth) region and Dy are better descriptors of the machined laminate composite surface than commonly used roughness parameters Ra and Ra. The characteristics of surface profiles in laminate composite are well represented in CHD (Cumulative Height Distribution) plot and PPD (Percentage Probability Density) plot. Also, the power spectral density function is shown to be capable of identifying the wavelength distribution of the machining damage.

• Journal of computational fluids engineering
• /
• v.21 no.3
• /
• pp.31-38
• /
• 2016

The FDS-HCIB method is expanded to simulate water-oil-air flows around oil booms under relative motion, which is intended to increase the thickness of contained oil. The FDS scheme captures discontinuity in the density field and abrupt change of the tangential velocity across an interface without smearing. The HCIB method handles relative motions of thin oil booms with ease. To validate the developed FDS-HCIB code for water-oil-air flow around a moving body, the computed results are compared with the reported experimental results on the shape, length, and thickness of the oil slicks under towing. It is observed that the increase in pressure field between two barriers lifts the oil slick and the interfacial wave propagates and reflects as one barrier gets closer to the other barrier.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.05a
• /
• pp.205-208
• /
• 2012

Recent the free-formed architecture is smearing as a trend with the development of the digital equipment and technologies. The development of new method based on digital technology is required for the free-formed structure,, because the conventional construction methods are limited to shorten the construction period and to ensure the construction quality. Particularly, the development of the new method for the free-formed concrete structure is important. In this study, the developed method of the T-shape lightweight steel fabricated using CNC can control the geometries of the free-formed concrete structure based on the digital design. Also, new method is effective to ensure the precision of the construction and economic than the conventional construction methods.

• Proceedings of the KACD Conference
• /
• 2001.11a
• /
• pp.585.2-585
• /
• 2001

The purpose of this study was to evaluate the microtensile bond strength of sixth-generation adhesives according to various dentin surface treatments and to observe the interface between resin(Z-100TM) and dentin by SEM. This study employed forty-five non-caries extracted human molars and three adhesive systems were used; All-Bond 2(AB), One-Up Bond F(OU), AQ-Bond(AQ).; group 1, 2, 3 were used AB and were respectively treated by smearing(S), ultrasonic cleansing(US), etching(E).(omitted)

• Journal of Veterinary Clinics
• /
• v.18 no.4
• /
• pp.434-437
• /
• 2001

A female Russian blue cat has invited Animal Hospital because of diarrhea after the mating. The eggs on internal parasite and Giardia sp. were diagnosed in the feces floating test, and treated with metronidazole, pyrantel pamoate and antibiotics. There were no diarrheal sign in the reevaluation, but anorexia, polydipsia, polyuria, and vaginal discharge was newly induced. Streptococcus sp. was inspected by smearing of vaginal discharge, and enlarge-ment of uterus was evaluated by x-ray examination. This case was confirmed as pyometra and recovered by ovariohysterectomy on the basis of that examination. The rate of incidence in feline pyometra is not so high as in the canine.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.238-241
• /
• 2007

We present an innovative method of multi-physics application involving energetic materials. Energetic materials are related to reacting flows in extreme environments such as fires and explosions. They typically involve high pressure, hish temperature, strong non-linear shock waves, and high strain rate deformation of metals. We use an Eulerian methodology to address these problems. Our approach is naturally free from large deformation of materials that makes it suitable for high strain-rate multi-material interaction problems. Furthermore we eliminate the possible interface smearing by using the level sets. We have devised a new level set based tracking framework that can elegantly handle large gradients typically found in reacting gases and metals. We show several work-in-progress applications of our algorithm including the Taylor impact test, explosive venting and additional confined explosion problems of modem interest.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.2
• /
• pp.251-254
• /
• 2006

The formation of polyaniline (PANI) in the reverse micelles of poly(oxyethylene) nonylphenyl ether, $(NP5, H(CH_2)_9Ph(OC_2H_4)_5OH)$, was investigated by small-angle neutron scattering (SANS). The reverse micellar solution containing initiators in the inner part of reverse micelle was prepared with surfactant (NP5), water, cyclohexane and an initiator (ammonium persulfate (APS)). The core-shell sphere model containing smearing effect reveals that the polymerization occurs on the shell layer of the reverse micelles. Shell thickness averages varied from 48 $\AA$ to 109 $\AA$ with increases of monomer concentration.

• Journal of the Society of Naval Architects of Korea
• /
• v.41 no.4
• /
• pp.17-29
• /
• 2004

Internal waves are computed using a ghost fluid method on an unstructured grid. Discontinuities in density and dynamic pressure are captured in one cell without smearing or oscillations along a multimaterial interface. A time-accurate incompressible Navier-Stokes/Euler solver is developed based on a three-point backward difference formula for the physical time marching. Artificial compressibility is introduced with respect to pseudotime and an implicit method is used for the pseudotime iteration. To track evolution of an interface, a level set function is coupled with the governing equations. Roe's flux difference splitting method is used to calculate numerical fluxes of the coupled equations. To get higher order accuracy, dependent variables are reconstructed based on gradients which are calculated using Gauss theorem. For each edge crossing an interface, dynamic pressure is assigned for a ghost node to enforce the continuity of total pressure along the interface. Solitary internal waves are computed and the results are compared with other computational and experimental results.