• 한국자동차공학회논문집
• /
• 제11권6호
• /
• pp.155-163
• /
• 2003

As vehicles become more intelligent for convenience and safety of drivers, the in-vehicle networking(IVN) systems and smart modules are essential components for intelligent vehicles. However, for wider application of smart modules and IVN's, the following two problems should be overcome. Firstly, because it is very difficult that transducer manufacturers developed the smart module that supports all the existing IVN protocols, the smart module must be independent of the type of networking protocols. Secondly, when the smart module needs to be replaced due to its failure, only the transducer should be replaced these without the replacement of the microprocessor and network transceiver. To solve these problems, this paper investigates the feasibility of an IEEE 1451 based smart module. More specifically, a smart module for DC motor control has been developed. The module has been evaluated for its delay caused by the IEEE 1451 architecture. In addition, the time required for transducer replacement has been measured.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.168-171
• /
• 2003

As vehicles are more intelligent for convenience and safety of drivers, the in-vehicle networking systems and smart modules are essential components for intelligent vehicles. However, for the smart module to widely apply to the IVN systems, two problems are considered as follows. Firstly, because it is very difficult that transducer manufacturers developed the smart module that supports the existing all IVN protocols, the smart module must be independent to the type of networking protocols. Secondly, when the smart module is exchanged due to its failure, it is necessary how the transducer is only exchanged without exchange of the microprocessor and network transceiver. This paper deals with the IEEE 1451 based smart module that describes the digital interface between a network transceiver and sensor module. Finally. efficiency of the IEEE 1451 based smart module was evaluated on the experimental model.

• 디지털산업정보학회논문지
• /
• 제14권3호
• /
• pp.11-20
• /
• 2018

Smart devices refer to various devices and control equipment such as health care devices, imaging devices, motor devices and wearable devices that use wireless network communication (e.g., Wi-fi, Bluetooth, LTE). Commercial services using such devices are found in a wide range of fields, including home networks, health care and medical services, entertainment and toys. Studies on smart devices have also been actively undertaken by academia and industry alike, as the penetration rate of smartphones grew and the technological progress made with the fourth industrial revolution bring about great convenience for users. While services offered through smart devices come with convenience, there is also various security threats that can lead to financial loss or even a loss of life in the case of terrorist attacks. As attacks that are committed through smart devices tend to pick up where attacks based on wireless internet left off, more research is needed on related security topics. As such, this paper seeks to design an access control method for reinforced security for smart devices. After registering and authenticating the smart device from the user's smart phone and service provider, a safe communication protocol is designed. Then to secure the integrity and confidentiality of the communication data, a management process such as for device renewal or cancellation is designed. Safety and security of the existing systems against attacks are also evaluated. In doing so, an improved efficiency by approximately 44% compared to the encryption processing speed of the existing system was verified.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권12호
• /
• pp.4748-4762
• /
• 2020

Recently, the COVID 19 pandemic has affected on our daily lives and society in many ways. Specifically, it has brought rapid changes in the working environment from office working to smart telecommuting. In addition, cloud computing technology and services not only provided ubiquitous access, but also led to a sharing of information, internal-external communication channels, telework, and innovative smart work for the business process. As a result, smart work services based on social cloud networking have spread to the public sector. However, existing academic research examining smart work merely remains to focus on the theoretical conceptualization or to deal with merely several examples of private views. Best practices of smart work services based on cloud computing technology in the public field rarely exists. Moreover, many studies have been differently measured the values of smart work for private and public sectors depending on organizational singularities. Therefore, the study aims to define new theoretical implications and to explore future business strategies and policy directions based on a technical working group's personal psychological subjectivity. The research applied Q methodology, and selected five public organizations in Korea, that they have adopted or currently plan to adopt some part of smart work services.

• 한국학교보건학회지
• /
• 제28권3호
• /
• pp.200-210
• /
• 2015

Purpose: This study aimed to examine the use of smart phones and their relationship with self-efficacy and academic achievement among students in 5th to 6th grade. Methods: 954 students in $5^{th}$ to $6^{th}$ grade were selected from three elementary schools in K City through purposive sampling. Data of 591 respondents were analyzed by $x^2$ test, ANOVA, correlation analysis and multiple regression analysis using the SPSS/WIN program. Results: First, 64% of the students possessed a smart phone and female students used their phone more than male students. 47.5% of the students said they first used a smartphone in their $5^{th}$ grade and 11.7% said in their 6th grade. Second, heavier use of smart phones was related to a lower level of self-efficacy (p<.001). Third, the more the students used a smart phone, the less they achieved in academic performance (Korean language: p<.001, mathematics: p<.01). Finally, the biggest factor influencing smart phone addiction was longer use of smart phones. In addition, lower self-efficacy and lower ability to adapt to difficult tasks were the factors influencing the increase in smart phone addiction. Less use of smart phones and higher self-efficacy resulted in higher achievement in academic performance. Conclusion: It is essential to decrease students' use of smart phones and improve their self-efficacy and academic performance. Intervention programs to reduce the use of smart phones should include a profound interest, a personality-oriented educational environment and sufficient dialogues with students at home, schools and the local society, beyond simple regulations to prevent adverse effects.

• 한국IT서비스학회지
• /
• 제17권3호
• /
• pp.157-169
• /
• 2018

This study aims to examine the factors influencing user attitude toward Smart Home service as the demand of Smart Home service is increasing and it somewhat involves privacy risk. To this end, the research model includes five independent variables, trust in service provider, perceived privacy risk, self efficacy, interpersonal influence, and external influence, influencing the attitude toward Smart Home service. So, this study aims to analyze which variable is the most critical and influential among the five factors and suggest the direction of Smart Home industries. This study first reviews the literature on Smart Home services and describes its Korean situation. Data were collected from residents living in a smart apartment complex. The results show that (1) users have a very positive attitude toward Smart Home service in total, (2) trust in service providers, self efficacy, and interpersonal influence positively impact user attitude toward Smart Home service and interpersonal influence is the most influential variable, however, (3) perceived privacy risk and external influence dose not significantly impact it. These results imply that the role of service providers, self efficacy, and interpersonal influence are important factors on the user attitude toward Smart Home service. Finally, the study's findings and limitations are discussed and potential avenues for future research are suggested.

• 한국의류산업학회지
• /
• 제22권5호
• /
• pp.660-675
• /
• 2020

Since Industry 4.0, there is a growing interest in smart manufacturing across all industries. However, there are few studies on this topic in the garment industry despite the growing interest in implementing smart manufacturing. This paper presents the feasibility and essential considerations for implementing smart manufacturing in the garment industry. A systematic review analysis was conducted. Studies on garment manufacturing and smart manufacturing were searched separately in the Scopus database. Key technologies for each manufacturing were derived by keyword analysis. Studies on key technologies in each manufacturing were selected; in addition, bibliographic analysis and cluster analysis were conducted to understand the progress of technological development in the garment industry. In garment manufacturing, technology studies are rare as well as locally biased. In addition, there are technological gaps compared to other manufacturing. However, smart manufacturing studies are still in their infancy and the direction of garment manufacturing studies are toward smart manufacturing. More studies are needed to apply the key technologies of smart manufacturing to garment manufacturing. In this case, the progress of technology development, the difference in the industrial environment, and the level of implementation should be considered. Human components should be integrated into smart manufacturing systems in a labor-intensive garment manufacturing process.

• 한국IT서비스학회지
• /
• 제11권3호
• /
• pp.241-255
• /
• 2012

Recently, smart home environments which provide complex services through smart appliances are becoming realized, due to the advances in connected devices and network technologies. Current smart home environments are mostly restricted, because of difficultly of integration of heterogeneous smart appliances. Therefore radical service integration is impracticable. In this paper, we analyze and implement Machine-to-Machine (M2M) standards which are established by European Telecommunications Standards Institute (ETSI) for integrating heterogeneous devices and services. Smart Home is one of the areas covered by ETSI M2M standards, however these standards are just standardized, so adaption and assessment in smart home are not proved yet. Therefore, this paper analyze ETSI M2M standards by focusing the data transport model and evaluate by selecting the most commonly used smart home scenarios and by implementing ETSI M2M standards compatible smart metering system. In some points ETSI M2M standards are not efficient because of its complexity of structure, however ETSI M2M provides sophisticated features for integrating M2M which are appropriate to adopt diverse smart home environments.

• 한국IT서비스학회지
• /
• 제11권sup호
• /
• pp.41-50
• /
• 2012

With the recent advances in smart grid technologies and the increasing dissemination of smart meters, the power usage of each time unit can be detected in modern smart building environments. Thus, the utility company can adopt different price of electricity at each time slot considering the peak time. Korea government also announces the smart-grid roadmap that includes a law for realtime price of electricity. In this paper, we propose an efficient power scheduling scheme for smart buildings that adopt smart meters and real-time pricing of electricity. Our scheme dynamically changes the power mode of each consumer device according to the change of power rates. Specifically, we analyze the electricity demands and prices at each time, and then perform real-time power scheduling of consumer devices based on collaboration of each device. Experimental results show that the proposed scheme reduces the electricity charge of a smart building by up to 36.4%.

• Composites Research
• /
• 제28권2호
• /
• pp.52-57
• /
• 2015

Soft morphing robotics making use of smart material and based on biomimetic principles are capable of continuous locomotion in harmony with its environment. Since these robots do not use traditional mechanical components, they can be built to be light weight and capable of a diverse range of locomotion. This paper illustrates a flexible smart phone robot made of smart soft composite (SSC) with inchworm-like locomotion capable of two-way linear motion. Since rigid components are embedded within the robot, bending actuators with embedded rigid segments were investigated in order to obtain the maximum bending curvature. To verify the results, a simple mechanical model of this actuator was built and compared with experimental data. After that, the flexible robot was implemented as part of a smart phone robot where the rigid components of the phone were embedded within the matrix. Then, experiments were conducted to test the smart phone robot actuation force under different deflections to verify its load carrying capability. After that, the communication between the smart phone and robot controller was implemented and a corresponding phone application was developed. The locomotion of the smart phone robot actuated through an independent controller was also tested.