• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2007.04a
• /
• pp.33-38
• /
• 2007

This paper reports an attempt to develop 7-wire steel tendon which is instrumented with optical FBG sensors. The tendon is devised to replace the king cable, which is located in the center of the tendon, by a steel tube in which the FBG sensor are attached along the hole using a high-mobility polyester resin. The circular steel tube has typical of 5 mm outer diameter and 1 mm inner diameter, and can easily be manufactured by means of an pultrusion process. Using the tube, in this study, three different types of one meter-long smart tendons are fabricated depending on mixture ratio of polyester resin and initiator. The performance of the FBG sensors as well as mechanical characteristics of the prototype are tested through the tensile test. Test results shows that the proposed smart tendon is in principle very effective for measuring the working strain of the tendon.

• Journal of the Korean Dietetic Association
• /
• v.22 no.3
• /
• pp.225-231
• /
• 2016

The study suggests the possibility of using internet of things for a dietary intake survey. The development scenario of the dietary intake survey was composed of a weighing sensor for measuring food weight, bluetooth module for communicating through smart-phones, and smart-phone application. The weighing sensor attached to the bottom of utensils was designed to measure the weight of initial food & food eaten, and the results were transmitted to the smart-phone through the bluetooth module. The exclusive application in the smart-phone displayed the results of the amount of food intake, calorie intake, and eating rate. Through this system, subjects could continuously monitor their dietary intake & eating rate and recognize their actual eating environment, which leads to prevent overconsumption of food intake & form balanced eating habits. Based on this system, we need to consolidate and develop a weight control program.

• KCI Concrete Journal
• /
• v.11 no.3
• /
• pp.109-114
• /
• 1999

Recently the interest in the safety assessment of civil infrastructures has increased. As bridge structures become large-scale, it is necessary to monitor and maintain the safety of large bridges, which requires smart systems that can make long-term monitoring a reality . Civil engineers have applied monitoring systems to several bridges, such as the New Haeng-Ju Bridge and Riverside Urban Highway Bridge, but these applications have some problems with the sensors for long-term measurement, setup techniques for the bridge monitoring system and the assessment of measured data. In the present study, an optical fiber sensor smart system was tested and confirmed in laboratory tests on the concrete members. By Attaching optical fiber sensors to the structural parts of the Sung-San Bridge, the bridge load test was measured. These smart concrete structure systems can be applied to bridges and the load capacity of the bridge can assessed.

• Journal of Information Processing Systems
• /
• v.19 no.1
• /
• pp.118-129
• /
• 2023

The expansion of smart cities drives the growth of data generated from sensor devices, benefitting citizens with enhanced governance, intelligent decision-making, optimized and sustainable management of available resources. The exposure of user data during its collection from sensors, storage in databases, and processing by artificial intelligence-based solutions presents significant security and privacy challenges. In this paper, we investigate the various threats and attacks affecting the growth of future smart cities and discuss the available countermeasures using artificial intelligence and blockchain-based solutions. Open challenges in existing literature due to the lack of countermeasures against quantum-inspired attacks are discussed, focusing on postquantum security solutions for resource-constrained sensor devices. Additionally, we discuss future research and challenges for the growing smart city environment and suggest possible solutions.

• The KIPS Transactions:PartB
• /
• v.15B no.3
• /
• pp.189-196
• /
• 2008

In this paper, a CMOS digital image sensor, which consists of A/D conversion, motion estimation circuits, and an attention module for ROI (Region of Interest) detection is presented. The functions of A/D conversion and motion estimation are implemented by $0.6{\mu}m$ CMOS processing circuit as hardware, and the attention module is implemented outside the circuit as software currently. Attention modules are taken to improve limited applications of the smart image sensor. The current smart image sensor responses to the changes of intensity, and uses the integration time to estimate motion. Therefore it is limited in its applications. To make up for inherent property of the sensor from circuit design and extend its applications we decide to introduce perception solutions to the image sensor. Attention modules for still and moving images are employed to achieve such purposes. The suggested approach makes the smart image sensor available with additional functions for such cases that motion estimation or intensity changes are not observed. Experimental result shows the usefulness and extension of the image sensor.

• International journal of advanced smart convergence
• /
• v.8 no.3
• /
• pp.184-192
• /
• 2019

The existing digital signage systems inside the elevators are a lack of tailored contents appropriate to the space and environment inside or outside the elevators. Also, they almost impossible to flexibly respond to various contents disclosure according to the demand of the consumers or the elevator markets. Therefore we design and implement an IoT(Internet of Things)-based smart digital signage system for the safety of elevator passengers.. In order to provide IoT-based information to the smart digital signage within the elevator, we propose an IoT system as a set-top box with gyroscope sensor, acceleration sensor, RFID(Radio-Frequency Identification), fine dust sensor, etc., which processes various data collected by the sensors and provides the elevator passengers with various tailored contents such as elevator driving information, environmental information inside and outside the elevator, and disaster information in addition to simple advertisement information. The proposed IoT system is a set-top box that operates the smart digital signage and has an independent information control processor based on the IoT sensors that do not depend on the elevator control system. For the proposed smart digital signage, it supports an operating system that is independent of the elevator driving service as well as the media service. So the smart signage system has a characteristic that it does not depend on the elevator control system since it is a stand-along IoT-based information control system. With the proposed system providing intuitive content for the surge, steep descent, and radical movements of an elevator due to an emergency situation, the elevator passengers should be able to recognize the situation quickly and respond accordingly. In the near future, the proposed system will expand the market of digital signage applied in conjunction with the development of contents in the disaster, safety and environment fields, and expect expected to revitalize related industries associated with signage.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.847-850
• /
• 2003

An Eye Ball Sensor (EBS) is a system that locates the point where the user gazes on. The conventional EBS using a CCD camera needs many peripherals, software computation causing high cost and power consumption. This paper proposes a compact EBS using smart CMOS Image Sensor (CIS) pixels. The proposed single chip EBS does not need any peripheral and operates at higher speed and lower cost than the conventional EBS. The test chip was designed and fabricated for 32$\times$32 smart CIS pixel array with a 0.35 um CMOS process occupying 5.3$\textrm{mm}^2$ silicon area.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.11 no.6
• /
• pp.193-199
• /
• 2001

Active control of forced vibration of the cantilevered laminated composite plates using collocated piezoceramic sensor/actuator is analyzed numerically and verified experimentally for various fiber orientations. Impact on the stiffness and the damping properties is studied by varying stacking sequence of [$\theta$$_{4}$O$_{2}$90$_{2}$]s for the laminated composite plate. For the forced vibration control, the plate is excited by one pair of collocated PZT exciters in resonance and its vibrational response is suppressed by the other collocated PZT sensor/actuator using direct negative velocity feedback. It is shown that the active control of forced vibration is more effective for the smart laminated plate with higher modal damped stiffness(2ζ$\omega$/aup 2/) .

• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.193-196
• /
• 2007

Recent advancements of wireless communication technology and miniaturization technique enables the implementation of wireless sensor network(WSN) using smart sensors. In addition, the research on the application of WSN to various fields of our daily life is performing briskly[1]. In this paper, we described the implementation of campus vehicle management system using wireless sensor nodes as an application of WSN. To do this, we have investigated the functions of commercial wireless sensor nodes such as transmission power control and node identification. We also proposed the architecture and operation procedure for the real system implementation.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.276-278
• /
• 2009

In this paper, we propose the smart management technique of applications using fuzzy logic in wireless sensor networks. We consider the intelligent action compared to the classical action that can only be controlled by on and off. The vagueness depends on the places of the sensor nodes, human's character and emotion. In order to control them with the smartness, the proposed technique considers the better performance of applications in wireless sensor networks. We performed the simulations and implementations on sensor nodes and checked out our ideas. The simulation results show that the proposed technique is more reasonable than the classical approach.