• Journal of Korea Multimedia Society
• /
• v.11 no.12
• /
• pp.1697-1705
• /
• 2008

Several studies made for wireless mesh networks aim to optimize the capacity for wireless networks. Aside from protocol improvements, researches were also done on the physical layer particularly on modulation techniques and antenna efficiency schemes. This paper is concerned with the capacity improvements derived from using spatial diversity with smart adaptive array antennas. The use of spatial diversity, which has been widely proposed for use in cellular networks in order to lessen frequency re-use, can be used in mesh networks both to minimize co-channel interference (CCI) and enable multiple transmissions. This paper aims to study the capacity region and bounds in using smart antennas for single-channel multi-radio systems in relation to the number of spatial diversity or sectors as defined by the beam angle $\beta$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.8
• /
• pp.808-820
• /
• 2014

In this paper, we fabricated two on-wafer type DUT(Device-Under-Test)s; a 10-dB attenuator and an amplifier using commercially available MMIC and we proposed the measurement method of the noise parameters for the two fabricated DUTs. Since the 10-dB attenuator DUT is a passive device, its noise parameters can be accurately determined when its S-parameters are measured. In the case of the amplifier DUT, its noise parameters are available in the datasheet. Hence, the measured noise parameters using the proposed method can be assessed by comparing with the known noise parameters. The noise parameter measurement method having been presented by the authors requires the S-parameters of the 8-port network used in the measurement and limited to coaxial type DUTs. When on-wafer probes are included in the 8-port network, the 8-port S-parameters requires the measurements with different kinds of connectors. In this paper, we obtained the 8-port S-parameters using the Smart-Cal function in the network analyzer. The measured noise parameters shows about ${\pm}0.2dB$ fluctuations for $NF_{min}$. Other noise parameters with the frequency change show good agreement with the expected results.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.7
• /
• pp.4842-4848
• /
• 2015

This paper presents a comparison of communication performance between the reconfigurable beam-steering antenna and the omni-directional (loop) antenna during standstill and walking motion. Both omni-directional and reconfigurable antennas were manufactured on the same fabric (${\varepsilon}_r=1.35$, $tqn{\delta}=0.02$) substrate and operated around 5 GHz band. The reconfigurable antenna was designed to steer the beam directions. To implement the beam-steering capability, the antenna used two PIN diodes. The measured peak gains were 5.9-6.6 dBi and the overall half power beam width (HPBW) was $102^{\circ}$. In order to compare the communication efficiency, both the bit error rate (BER) and the signal-to-noise ratio (SNR) were measured using a GNU Radio Companion software tool and user software radio peripheral (USRP) devices. The measurement were performed when both antennas were standstill and walking motion in an antenna chamber as well as in a smart home environment. From these results, the performances of the reconfigurable beam steering antenna outperformed that of the loop antenna. In addition, in terms of communication efficiencies, in an antenna chamber was better than in a smart home environment. In terms of movement of antennas, standstill state has better results than walking motion state.

• Journal of IKEEE
• /
• v.12 no.2
• /
• pp.81-86
• /
• 2008

In wireless communication system using 2.4GHz radio link, data rate varies with time due to interferences, which causes the performance degradation. Therefore, effective transmission methods are required to obtain better performance according to varying data rate. This paper proposes a novel method that increases the data rate, as well as the influence of different loop-filter bandwidths on the performance of the PLL. Experimental results show that the proposed method is effective because it can achieve higher throughput in various data rate.

• International journal of advanced smart convergence
• /
• v.4 no.2
• /
• pp.177-185
• /
• 2015

In this paper we introduce Kernel Fisher Discriminant Analysis (KFDA) to transform our database of received signal strength (RSS) measurements into a smaller dimension space to maximize the difference between reference points (RP) as possible. By KFDA, we can efficiently utilize RSS data than other method so that we can achieve a better performance.

• Journal of the Korea Convergence Society
• /
• v.2 no.4
• /
• pp.1-7
• /
• 2011

As the developing of the information technology, M2M market that is using communication between devices is growing rapidly and many companies are involved in M2M business. In this paper, the concept of telematics and vulnerabilities of vehicle network security are discussed. The convergence of vehicle and information technology, the development of mobile communication technology have improved quality of service that provided to user but as a result security threats has diverse. We proposed new business model that be occurred to the participation of mobile carriers in telematics business and we analyzed mobile radio communication network security vulnerabilities. We proposed smart phone and Vehicle authentication scheme with M2M device as a way to solve vulnerabilities.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.5 no.1
• /
• pp.43-59
• /
• 2006

A compact and broadband $4\times1$ array antenna was developed for 3G smart antenna system testbed. The $4\times1$ uniform linear away antenna was designed to operate at 1.885 to 2.2GHz with a total bandwidth of 315MHz. The array elements were based on the novel broadband L-probe fed inverted hybrid E-H (LIEH) shaped microstrip patch, which offers 22% size reduction to the conventional rectangular microstrip patch antenna. For steering the antenna beam, a commercial variable attenuator (KAT1D04SA002), a variable phase shifter (KPH350SC00) with four units each, and the corporate 4-ways Wilkinson power divider which was fabricated in-house were integrated to form the beamforming feed network. The developed antenna has an impedance bandwidth of 17.32% $(VSWR\leq1.5)$, 21.78% $(VSWR\leq2)$ with respect to center frequency 2.02GHz and with an achievable gain of 11.9dBi. The design antenna offer a broadband, compact and mobile solution for a 3G smart antenna testbed to fully characterized the IMT-2000 radio specifications and system performances.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.7 no.1
• /
• pp.41-58
• /
• 2007

A compact and broadband $4{\times}1$ array antenna was developed for 3G smart antenna system testbed. The $4{\times}1$ uniform linear array antenna was designed to operate at 1.885 to 2.2GHz with a total bandwidth of 315MHz. The array elements were based on the novel broadband L-probe fed inverted hybrid E-H (LIEH) shaped microstrip patch, which offers 22% size reduction to the conventional rectangular microstrip patch antenna. For steering the antenna beam, a commercial variable attenuator (KAT1D04SA002), a variable phase shifter (KPH350SC00) with four units each, and the corporate 4-ways Wilkinson power divider which was fabricated in-house were integrated to form the beamforming feed network. The developed antenna has an impedance bandwidth of 17.32% ($VSWR{\leq}1.5$), 21.78% ($VSWR{\leq}2$) with respect to center frequency 2.02GHz and with an achievable gain of 11.9dBi. The design antenna offer a broadband, compact and mobile solution for a 3G smart antenna testbed to fully characterized the IMT-2000 radio specifications and system performances.

• International journal of advanced smart convergence
• /
• v.1 no.2
• /
• pp.59-63
• /
• 2012

The mVoIP service is the technology which focuses on the wireless data service as the IP network having the transmission rate of 100 Mbps classes on the high-speed middle of movement through the WiFi, WiBro and 3G mobile radio communication network, and etc. and is developed. Since 2010, the mVoIP (mobile VoIP) service shows the rapid growth due to 4G-LTE service seriously disclosed from July with the Smart phone and 2,011 it begins to be rapidly popularized. In this research, additionally the mVoIP service industry activation plan is presented with the trends of technology development including the chip-set/module/terminal, etc. based upon local and foreign market trend searchlight through the market demand analysis. The mVoIP service downloads App to the mobile apparatus and or can provide the service as the software through the WiFi network. Therefore, the change which is large in the products development aspect is to be have no. Expected to is being provided as the added service in the case of 4G-LTE as a matter of course, the service deployment where it is based on the market principle and demand needs is needed.

• Journal of Korea Multimedia Society
• /
• v.16 no.5
• /
• pp.566-576
• /
• 2013

In Home Area Network (HAN) of the smart grid, Power Line Communication (PLC) technology and ZigBee communication technology can be used in the communication among the Advanced Metering Infrastructure (AMI) devices. However, according to performance evaluation results of the PLC technology, we find that using the PLC technology is unsuitable for the remote meter reading service. It is worth noting that some parts of the PLC are converted to the ZigBee communication technology in Jeju, Korea. Compared with PLC, ZigBee has no restriction of the place, where the equipments can be freely set up, due to the advantage of radio communication. However, number of usable devices will impact the network performance which is depended on the address assignment. In addition, due to the restriction of transmission range among devices, it is difficult to apply the ZigBee address assignment method to the practical circumstance. In this paper, we examine the previous ZigBee address assignment schemes and the corresponding routing algorithms, and propose a novel address assignment scheme compared with the existing methods, the performance of the proposed one is improved. In particular, evaluation results show that the proposed scheme reduces the average number of hop count, the transfer time and the processing time.