• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.3
• /
• pp.533-539
• /
• 2013

Recently, Ionic Polymer Metal Composite (IPMC) systems receive great attention in the fields of the medical and biomedical Engineering because of several merits in terms of new actuators and sensors and fuel cell materials. When the voltage is excited to IPMC system, it moves. Conversely, if there are any movement on the IPMC, the IPMC has charge voltage by the internal properties. Therefore the IPMC can be used as a motion sensor or force sensor. In this paper, we identify characteristics of the IPMC and control its movements from remote locations by the smart-phone system based on visual information for monitoring. Additionally, control of movements of the IPMC is realized by transmit motion commands using the smart-phone system with the blue-tooth communication. Unfortunately, there are some deficiencies to perfectly attain physical properties of the IPMC systems from our experiments in this paper. However, in its utilization point of view, we demonstrate that the IPMC has some potentials as new sensors, actuators, and fuel cells.

• Smart Structures and Systems
• /
• v.16 no.3
• /
• pp.383-399
• /
• 2015

Today, as railways increase their capacity and speeds, it is more important than ever to be completely aware of the state of vehicles fleet's condition to ensure the highest quality and safety standards, as well as being able to maintain the costs as low as possible. Operation of a modern, dynamic and efficient railway demands a real time, accurate and reliable evaluation of the infrastructure assets, including signal networks and diagnostic systems able to acquire functional parameters. In the conventional system, measurement data are reliably collected using coaxial wires for communication between sensors and the repository. As sensors grow in size, the cost of the monitoring system can grow. Recently, auto-powered wireless sensor has been considered as an alternative tool for economical and accurate realization of structural health monitoring system, being provided by the following essential features: on-board micro-processor, sensing capability, wireless communication, auto-powered battery, and low cost. In this work, an original harvester device is designed to supply wireless sensor system battery using train bogie energy. Piezoelectric materials have in here considered due to their established ability to directly convert applied strain energy into usable electric energy and their relatively simple modelling into an integrated system. The mechanical and electrical properties of the system are studied according to the project specifications. The numerical formulation is implemented with in-house code using commercial software tool and then experimentally validated through a proof of concept setup using an excitation signal by a real application scenario.

• Journal of Digital Contents Society
• /
• v.17 no.5
• /
• pp.401-407
• /
• 2016

In the smart education era, it is crucial for the teacher to make lecture materials in the form of 3D convergence contents for themselves. In this study, we developed an interactive authoring tool to create 3D convergence contents for the teacher. The proposed system was implemented based on a commercial 3D engine for practicality. To evaluate the usability of the tool, we conducted a satisfaction survey of a focus group. As a result, we concluded that the proposed authoring tool was useful to create desired contents but rather complicated to use due to the text-based script editor. In the following research we will improve the editor so that it can be used in a more intuitive manner.

• Journal of the Korea Convergence Society
• /
• v.12 no.10
• /
• pp.203-210
• /
• 2021

This study was conducted to develop a convergence education program using smart farms with both input data(temperature, humidity, etc.) and output data(vegetables, fruits, etc.) that are easily accessible in everyday life so that elementary school students can intuitively and easily understand the principles of artificial intelligence(AI) learning. In order to develop this program, we conducted a prior study analysis of a horticulture, software, robot units in the 2015 Practical Arts curriculum and artificial intelligence education. Based on this, 13 components and 16 achievement criteria were selected, and AI programs of 4 sessions(a total of 8 hours). This program can be used as a reference when developing various teaching materials for artificial intelligence education in the future.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.46 no.5
• /
• pp.760-771
• /
• 2022

This study sought to develop clothing for a companion animal that can provide stable ECG measurements. A pattern for the smart clothing of a companion dog was manufactured using the replica method to select a location and method that best suited the stable measurement of ECG and improved the clothing's fitness. The smart clothing was developed as the following three types: strap type, top type, and combined top and vest type with a detachable wireless ECG monitor. The detection abilities of these were observed using the PQRST rate taken after ECG measurements while the three companion dogs were tested while resting and moving. The results revealed that apart from using an electrode, applying a gel pad is the most effective way to achieve stable ECG measurements, and the central chest region is more reliable than the left armpit for providing steady readings. The combined top and vest type showed the highest average ECG PQRST detection number, meaning that the ECG signal measurement was steady. These results may contribute to the measurement of ECG in smartwear for U-Healthcare to measure other biometric data of a companion dog.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.2
• /
• pp.143-150
• /
• 2023

Underwater wireless communication is a challenging issue for realizing the smart aqua-farm and various marine activities for exploring the ocean and environmental monitoring. In comparison to acoustic and radio frequency technologies, the visible light communication is the most promising method to transmit data with a higher speed in complex underwater environments. To send data at a speedier rate, high-performance photodetectors are essentially required to receive blue and/or cyan-blue light that are transmitted from the light sources in a light-fidelity (Li-Fi) system. Here, we fabricated high-performance organic phototransistors (OPTs) based on P-type donor polymer (PTO2) and N-type acceptor small molecule (IT-4F) blend semiconductors. Bulk-heterojunction (BHJ) PTO2:IT-4F photo-active layer has a broad absorption spectrum in the range of 450~550 nm wavelength. Solution-processed OPTs showed a high photo-responsivity >1,000 mA/W, a large photo-sensitivity >10³, a fast response time, and reproducible light-On/Off switching characteristics even under a weak incident light. BHJ organic semiconductors absorbed photons and generated excitons, and efficiently dissociated to electron and hole carriers at the donor-acceptor interface. Printed and flexible OPTs can be widely used as Li-Fi receivers and image sensors for underwater communication and underwater internet of things (UIoTs).

• Journal of the Korean Geotechnical Society
• /
• v.39 no.7
• /
• pp.39-48
• /
• 2023

Over 100 countries have conducted research on experimental testing methods to assess the frost susceptibility of soils. This study aims to prevent structural damage caused by frost heave. Notably, the United States and Japan, which encompass cold regions such as Alaska and Hokkaido, have actively pursued frost heave research. Through laboratory investigations and field applications, standard testing methods and criteria for evaluating frost susceptibility have been established. However, these methods are complex and their engineering explanations are vague. This study closely compares and analyzes the frost-susceptibility testing methods proposed by ASTM and JGS, considering temperature conditions, specimen size, freezing direction, and drainage conditions. By conducting this comparative analysis, this study aims to shed light on the similarities and differences between the two methods. Furthermore, based on the findings, this study proposes future research guidance for refining frost-susceptibility testing methods and criteria.

• Tunnel and Underground Space
• /
• v.33 no.5
• /
• pp.373-387
• /
• 2023

Scientific exploration of extraterrestrial planets has gripped human imagination since the advent of space travel. Human missions to Mars could produce insight into the essential questions of how, when and where life began on Earth. Such missions would only be feasible using local space resources materials, a concept called in situ-resource utilization (ISRU). The purpose of this paper is to provide a thorough review of the currently available Mars soil simulants and to determine those with geotechnical properties most appropriate for vehicle mobility studies. Sourcing and processing are considered since full-scale studies require bulk quantities of material on the order of tens of tons. This review identifies the simulants with the highest fidelity to Mars wind drift soils. In addition, recommendation guide for mars soil simulant development made.

• International Journal of Control, Automation, and Systems
• /
• v.5 no.4
• /
• pp.429-435
• /
• 2007

A number of different alternative actuation methods have been under active development for some specific applications where the traditional electromechanical actuators are difficult to apply. Recently, many of these substitutes are trying to employ new smart materials like electroactive polymers. However most of the polymeric materials are flexible and vulnerable so that they normally can not sustain external forces. Although the materials have shown a good potential to be used for alternative actuation mechanisms, no tangible industrial application is yet presented because of the reason. A conceptual design for a rectilinear motion actuator using dielectric elastomer is presented in this article. The introduced design concept might enable to produce fairly controllable rectilinear motions for various applications and the presented prototype actuator system is fully packaged in a small unit and controlled by a standard communication interface.

• Journal of Sensor Science and Technology
• /
• v.26 no.3
• /
• pp.204-208
• /
• 2017

Highly uniform and well-dispersed Zeolitic Imidazolate Framework-7 (ZIF-7) particles were prepared by the precipitation of $Zn^{2+}$ using benzimidazole, which were converted into ZnO nanoparticles by heat treatment at $500^{\circ}C$ for 24 h. The ZIF-7 derived ZnO nanoparticles showed abundant mesopores, high surface area, and good dispersion. The gas sensing characteristics toward 5 ppm acetone, ethanol, trimethylamine, ammonia, p-xylene, toluene, benzene, and carbon monoxide and carbon dioxide were investigated at $350-450^{\circ}C$. ZIF-7 derived ZnO nanoparticles exhibited high response to 5 ppm acetone ($R_a/R_g=57.6$; $R_a$: resistance under exposure to the air, Rg: resistance under exposure to the gas) at $450^{\circ}C$ and negligible cross-responses to other interference gases (trimethylamine, ammonia, p-xylene, toluene, benzene, carbon monoxide, carbon dioxide) and relatively low responses to ethanol. ZIF derived synthesis of metal oxide nanoparticles can be used to design high performance acetone sensors.