• Journal of Internet of Things and Convergence
• /
• v.6 no.4
• /
• pp.7-14
• /
• 2020

This study analyzed the effect of the number of deaths of circulatory system diseases according to 12-day short-term exposure of carbon monoxide from January 2010 to December 2018, and predicted the future treatment cost of circulatory system diseases according to increased carbon monoxide concentration. Data were extracted from Air Korea of Korea Environment Corporation and Korea Statistical Office, and analyzed using Poisson regression analysis and ARIMA intervention model. For statistical processing, SPSS Ver. 21.0 program was used. The results of the study are as follows. First, as a result of analyzing the relationship between the impact of short-term carbon monoxide exposure on death of circulatory system diseases from the day to the previous 11 days, it was found that the previous 11 days had the highest impact. Second, with the increase in carbon monoxide concentration, the future circulatory system disease treatment cost was estimated at 10,123 billion won in 2019, higher than the observed value of 9,443 billion won at the end of December 2018. In addition, when summarized by month, it can be seen that the cost of treatment for circulatory diseases increases from January to December, reflecting seasonal fluctuations. Through such research, the future for a healthy life for all citizens can be realized by distributing various devices and equipment utilizing IoT to preemptively respond to the increase in air pollutants such as carbon monoxide.

• Tunnel and Underground Space
• /
• v.33 no.2
• /
• pp.95-107
• /
• 2023

In this study, the effect of repeated traffic vibration on the long-term stability of mine openings is analyzed for re-utilization of abandoned mine galleries. The research mine in this study is an underground limestone mine which is developed by room-and-pillar mining method, and a dynamic numerical analysis is performed assuming that the research mine will be utilized as a logistics warehouse. The actual traffic vibration generated by the mining vehicles is measured directly, and its waveform is used as input data for dynamic numerical analysis, As a results of dynamic numerical analysis, after 20,000 repetitions of traffic vibration, the mine openings is analyzed to be stable, but an increase in the maximum principal stress and an additional area of plastic zone are observed in the analysis section. As shown in the changes of displacement, volumetric strain, and maximum principal stress which are measured at the mine opening walls. It is confirmed that if the repeated traffic vibration is continuously applied, the instability of the mine openings can be increased. Authors expect that the results of this study can be used as a reference for basic study on utilization of abandoned mine.

• The Korean Journal of Franchise Management
• /
• v.7 no.1
• /
• pp.31-44
• /
• 2016

Purpose - This study aims to examine different impacts of franchisor's leadership and franchisee's marketing efforts on franchisee dissatisfaction and switching intentions, and to investigate how franchisee dissatisfaction plays a mediating role in the relationship between these constructs. This study attempted to fill the gap in the literature by treating the franchisee dissatisfaction as a mediator in the relationship between these constructs, identify how franchisor's leadership and franchisee's marketing efforts have effects on franchisee dissatisfaction, in turn, reduce switching intentions, and provide the managerial implications for building a long-term relationship to achieve mutual goals between franchisors and franchisees Research design, data, and methodology - In order to test the hypotheses, the data were collected from franchisees in Seoul and Gyeonggi Province. The franchisee owners were informed about the purpose of this study by the trained interviewers. The respondents received a letter introducing the purpose of this study and another letter that the owners wrote to encourage their active participation. Among the 300 questionnaires distributed, 260 (86.7%) questionnaires were returned. Of those collected questionnaires, 6 uncompleted responses were excluded, and 254 questionnaires with an effective response rate of 84.7% were coded and analyzed using frequency, confirmatory factor analysis, and correlations analysis, and structural equation modeling with SPSS 21.0 and SmartPLS 3.0. Results - The findings of the study are as follows. First, franchisor leadership had a negative effect on franchisee dissatisfaction, but franchisee marketing efforts did not have a significant effect on franchisee dissatisfaction. Second, franchisee dissatisfaction had a positive effect on switching intentions. Third, franchisor leadership had a negative effect on switching intentions, but franchisee marketing efforts did not have a significant effect on switching intentions. Conclusions - This study researched the franchisor's leadership as a single factor of transformational leadership. Thus, it may have limits in measuring leadership. Future studies shall include emotional, loyal, and transactional leadership. In addition, the future studies shall also research the effect of franchisor's leadership and franchisees' marketing efforts on dissatisfaction and switching intentions. For example, the franchisor's relationship-oriented efforts can be a crucial parameter that reduces dissatisfaction and switching intentions.

• Smart Structures and Systems
• /
• v.30 no.5
• /
• pp.521-535
• /
• 2022

Efficient management of deteriorating civil infrastructure is one of the most important research topics in many developed countries. In particular, the remote displacement measurement of bridges using linear variable differential transformers, global positioning systems, laser Doppler vibrometers, and computer vision technologies has been attempted extensively. This paper proposes a remote displacement measurement system using closed-circuit televisions (CCTVs) and a computer-vision-based method for in-situ bridge bearings having relatively large displacement due to temperature change in long term. The hardware of the system is composed of a reference target for displacement measurement, a CCTV to capture target images, a gateway to transmit images via a mobile network, and a central server to store and process transmitted images. The usage of CCTV capable of night vision capture and wireless data communication enable long-term 24-hour monitoring on wide range of bridge area. The computer vision algorithm to estimate displacement from the images involves image preprocessing for enhancing the circular features of the target, circular Hough transformation for detecting circles on the target in the whole field-of-view (FOV), and homography transformation for converting the movement of the target in the images into an actual expansion displacement. The simple target design and robust circle detection algorithm help to measure displacement using target images where the targets are far apart from each other. The proposed system is installed at the Tancheon Overpass located in Seoul, and field experiments are performed to evaluate the accuracy of circle detection and displacement measurements. The circle detection accuracy is evaluated using 28,542 images captured from 71 CCTVs installed at the testbed, and only 48 images (0.168%) fail to detect the circles on the target because of subpar imaging conditions. The accuracy of displacement measurement is evaluated using images captured for 17 days from three CCTVs; the average and root-mean-square errors are 0.10 and 0.131 mm, respectively, compared with a similar displacement measurement. The long-term operation of the system, as evaluated using 8-month data, shows high accuracy and stability of the proposed system.

• Journal of the Society of Disaster Information
• /
• v.19 no.4
• /
• pp.916-923
• /
• 2023

Purpose: Looking at the status of fatal accidents in the construction industry in the 2022 Industrial Accident Status Supplementary Statistics, 27.8% of all fatal accidents in the construction industry are caused by construction equipment. In order to overcome the limitations of tours and inspections caused by the enlargement of sites and high-rise buildings, we plan to build a model that can extract construction equipment using computer vision technology and analyze the model's accuracy and field applicability. Method: In this study, deep learning is used to learn image data from excavators, dump trucks, and mobile cranes among construction equipment, and then the learning results are evaluated and analyzed and applied to construction sites. Result: At site 'A', objects of excavators and dump trucks were extracted, and the average extraction accuracy was 81.42% for excavators and 78.23% for dump trucks. The mobile crane at site 'B' showed an average accuracy of 78.14%. Conclusion: It is believed that the efficiency of on-site safety management can be increased and the risk factors for disaster occurrence can be minimized. In addition, based on this study, it can be used as basic data on the introduction of smart construction technology at construction sites.

• Journal of the Korean GEO-environmental Society
• /
• v.25 no.4
• /
• pp.29-35
• /
• 2024

This is an analytical study to confirm the passive resistance effect before post-tensioning of steel bar anchors. When using a steel bar as a permanent anchor, if displacement occurs within the slope even before the head load is applied, the displacement is suppressed by the passive resistance caused by the interaction between the steel bar, grout, and surrounding soil. Accordingly, the shape of the failure surface and changes in the safety factor were examined using limit equilibrium analysis and finite element analysis targeting sites where steel bar anchors were actually applied. It was found that the safety factor of the slope reinforced with steel bar anchors is 2.02 using finite element analysis, which is about 5.9% smaller than 2.14 using limit equilibrium analysis. Also, the location of the failure surface was found to be deeper compared to the unreinforced slope. Likewise, the factor of safety has a 153% and 163% increase using finite element method and limit equilibrium analysis, respectively. In addition, the maximum displacement occurs in the lower unreinforced section within the slope, and the displacement is found to be reduced by 42 to 83% at the location where the steel bar anchors are installed.

• Journal of Bio-Environment Control
• /
• v.28 no.2
• /
• pp.117-125
• /
• 2019

This study compared the temperature and humidity measured by an aspirated radiation shield (ARS), the accuracy of which has been recently verified, and those measured by a system developed by the parent company (Company A) to investigate and improve the performance of the developed system. The results are as follows. Overall, the two-plate system had a lower radiation shielding effect than the one-plate system but showed better performance results when excluding the effect of strawberry vegetation on the systems. The overall maximum temperature ranges measured by company A's system and the ARS were $20.5{\sim}53.3^{\circ}C$ and $17.8{\sim}44.1^{\circ}C$, respectively. Thus, the maximum temperature measured by company A's system was $2.7{\sim}9.2^{\circ}C$ higher, and the maximum daily temperature difference was approximately $12.2^{\circ}C$. The overall average temperature measured by company A's system and the ARS was $12.4{\sim}38.6^{\circ}C$ and $11.8{\sim}32.7^{\circ}C$, respectively. Thus, the overall average temperature measured by company A's system was $0.6{\sim}5.9^{\circ}C$ higher, and the maximum daily temperature difference was approximately $6.7^{\circ}C$. The overall minimum temperature ranges measured by company A's system and the ARS were $4.2{\sim}28.6^{\circ}C$ and $2.9{\sim}26.4^{\circ}C$, respectively. Thus, the minimum temperature measured by company A's system was $1.3{\sim}2.2^{\circ}C$ higher, and the minimum daily temperature difference was approximately $2.9^{\circ}C$. In addition, the overall relative humidity ranges measured by company A's system and the ARS were 52.9~93.3% and 55.3~96.5%, respectively. Thus, company A's system showed a 2.4~3.2% lower relative humidity range than the ARS. However, there was a day when the relative humidity measured by company A's system was 18.0% lower than that measured by the ARS at maximum. In conclusion, there were differences in the relative humidity measured by the two company's devices, as in the temperature, although the differences were insignificant.

• Journal of Korea Water Resources Association
• /
• v.56 no.11
• /
• pp.775-784
• /
• 2023

With the increasing trend of extreme rainfall that exceeds the design frequency of man-made structures due to extreme weather, it is necessary to review the safety of agricultural reservoirs designed in the past. However, there are no local government-managed reservoirs (13,685) that can be discharged in an emergency, except for reservoirs over a certain size under the jurisdiction of the Korea Rural Affairs Corporation. In this case, it is important to quickly deploy a mobile siphon to the site for preliminary discharge, and this study evaluated the applicability of a mobile siphon with a diameter of 200 mm, a minimum water level difference of 6 m, 420 (m²/h), and 10,000 (m²/day), which can perform both preliminary and emergency discharge functions, to the Yugum Reservoir in Gyeongju City. The test bed, Yugum Reservoir, is a facility that was completed in 1945 and has been in use for about 78 years. According to the hydrological stability analysis, the lowest height of the current dam crest section is 27.15 (EL.m), which is 0.29m lower than the reviewed flood level of 27.44 (EL.m), indicating that there is a possibility of lunar flow through the embankment, and the headroom is insufficient by 1.72 m, so it was reviewed as not securing hydrological safety. The water level-volume curve was arbitrarily derived because it was difficult to clearly establish the water level-flow relationship curve of the reservoir since the water level-flow measurement was not carried out regularly, and based on the derived curve, the algorithm for operating small and medium-sized old reservoirs was developed to consider the pre-discharge time, the amount of spillway discharge, and to predict the reservoir lunar flow time according to the flood volume by frequency, thereby securing evacuation time in advance and reducing the risk of collapse. Based on one row of 200 mm diameter mobile siphons, the optimal pre-discharge time to secure evacuation time (about 1 hour) while maintaining 80% of the upper limit water level (about 30,000 m²) during a 30-year flood was analyzed to be 12 hours earlier. If the pre-discharge technology utilizing siphons for small and medium-sized old reservoirs and the algorithm for reservoir operation are implemented in advance in case of abnormal weather and the decision-making of managers is supported, it is possible to secure the safety of residents in the risk area of reservoir collapse, resolve the anxiety of residents through the establishment of a support system for evacuating residents, and reduce risk factors by providing risk avoidance measures in the event of a reservoir risk situation.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.23 no.3
• /
• pp.192-207
• /
• 2020

Profitability of upland crops is better than paddy crops and proportion of upland is increasing. However, there is a lack of infrastructures for upland irrigation. The object of this study were to develop water supply scenarios using individual and collective agricultural wells to evaluate economic feasibility to consider geographical analysis of upland farms and water supply facilities. Cheongyang, Dangjin, Yesan, and Goesan were selected as study areas where four different crops of red pepper, chinese cabbage, apple, and bean, respectively, were mainly produced in Chungcheong province. As a result, B/C ratio was estimated as 1.49, 1.36, 1.90, and 0.71 in using individual wells scenario, and 1.45, 1.20, 1.91, and 0.65 in using collective wells scenario for red pepper, chinese cabbage, apple, and bean. It turned out that change of price effected on economic feasibility a lot for crops with low production income. As a result of evaluating economic feasibility by number of plots for developing collective well, there was no effect of economy of scale for red pepper and chinese cabbage. In case of collectivizating more than 20 upland plots, effect of economy of scale appeared for apple and bean. In conclusion, development of water using high value crops including red pepper and apple, and effect of collective well requires additory analysis of .spatial distribution of farms.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.10 no.6
• /
• pp.69-80
• /
• 2015

This can be promoted collaboration environment for the system and the system is very important for competitiveness, it is equipped. If so, could work in collaboration with members of the organization to promote collaboration what factors? Organizational collaboration and cooperation of many people working, or worth pursuing common goals by sharing information and processes to improve labor productivity, defined as collaboration. Factors that promote collaboration are shared visions, the organization's principles and rules that reflect the visions, on-line system developments, and communication methods. First, it embodies the vision shared by the more sympathetic members are active and voluntary participation in the activities of the organization can be achieved. Second, the members are aware of all the rules and principles of a united whole is accepted and leads to good performance. In addition, the ability to share sensitive business activities for self-development and also lead to work to make this a regular activity to create a team that can collaborate to help the environment and the atmosphere. Third, a systematic construction of the online collaboration system is made efficient and rapid task. According to Student team and A corporation we knew that Cloud services and social media, low-cost, high-efficiency services could achieve. The introduction of the latest information technology changes, the members of the organization's systems and active participation can take advantage of continuing education must be made. Fourth, the company to inform people both inside and outside of the organization to communicate actively to change the image of the company activities, the creation of corporate performance is very important to figure. Reflects the latest trend to actively use social media to communicate the effort is needed. For development of systematic collaboration promoting model steps to meet the organizational role. First, the Chief Executive Officer to make a firm and clear vision of the organization members to propagate the faith, empathy gives a sense of belonging should be able to have. Second, middle managers, CEO's vision is to systematically propagate the organizers rules and principles to establish a system would create. Third, general operatives internalize the vision of the company stating that the role of outside companies must adhere. The purpose of this study was well done in collaboration organizations promoting factors for strategic alignment model based on the golden circle and collaboration to understand and reflect the latest trends in information technology tools to take advantage of smart work and business know how student teams through case analysis will derive the success factors. This is the foundation for future empirical studies are expected to be present.