• 한국의류학회지
• /
• 제47권1호
• /
• pp.123-136
• /
• 2023

To develop smart sportswear capable of measuring biometric data, we created a close-fitting pattern using two- and three-dimensional (2D and 3D, respectively) methods. After 3D virtual fitting, the tightness of each pattern was evaluated using image processing of contact points, mesh deviation, and cross-sectional shapes. In contact-point analysis, the 3D pattern showed high rates of contact with the body (84.6% and 93.1% for shirts and pants, respectively). Compared with the 2D pattern, the 3D pattern demonstrated closer contact at the lower chest, upper arm, and thigh regions, where electrocardiography and electromyography were primarily carried out. The overall average gap was also lower in the 3D pattern (5.27 and 4.66 mm in shirts and pants, respectively). In the underbust, waist, thigh circumference, and mid-thigh circumference, the cross-section distance between clothing and body was showed a statistically significant difference and evenly distributed in the 3D pattern, exhibiting more closeness. The tightness and fit of the 3D smart sportswear sensor pattern were successfully evaluated. We believe that this study is critical, as it facilitates the comparison of different patterns through visualization and digitization through 3D virtual fitting.

• 감성과학
• /
• 제20권3호
• /
• pp.97-108
• /
• 2017

본 연구의 목적은 스마트 피트니스웨어가 갖추어야 할 요건과 스마트 피트니스웨어의 수용 정도 및 기능 수요를 고찰하고, 이를 기반으로 퍼스널 트레이닝 효과 향상을 지원하는 피트니스용 스마트 스포츠의류의 상품기획 및 디자인 방향을 제시하는 것이다. 이를 위해 전문 피트니스 트레이너를 심층 인터뷰하고 그 응답 자료에 대해 범주분석을 실시한 결과 5개의 범주와 13개 주제어를 도출하였다. 또한 일반 소비자들을 대상으로 설문조사를 실시하여 스마트 피트니스웨어의 수용 정도와 상품개발에 필요한 기능 수요를 탐색하였다. 그 결과 전반적으로 인구통계학적 특성에 따른 차이보다는 운동의 관여도 및 운동관련 문화와 관련된 특성에 따라 스마트 피트니스웨어의 수용 정도에 차이가 있는 것을 발견할 수 있었다. 스마트 피트니스웨어에 대한 기능 수요에 대한 차이점으로는 전문 트레이너의 경우 운동 효과의 과학적 향상에 중점을 두는 반면 일반 소비자는 운동 시 지속성을 고려한 기능을 중요시 하는 것으로 분석되었다. 본 연구 결과를 종합하여 '심박 센싱, 근육 활성도 센싱, 부위별 운동 동작 각도 또는 자세 센싱, 운동량 센싱 등의 기능 탑재', '전문가 라인과 일반 라인별 컨셉 및 컨텐츠 개발', '압박 의류 형태로 디자인', '운동지역에 따른 상품개발의 차별화' 등의 상품기획 및 디자인 방향을 제시하였다.

• 감성과학
• /
• 제21권3호
• /
• pp.129-140
• /
• 2018

본 연구는 고령에 접어들고 있는 베이비부머 집단의 보행 운동용 스마트 스포츠웨어 및 스포츠 애플리케이션에 대한 수용태도를 분석하고 베이비부머 집단의 특성에 맞는 스마트 워킹웨어 및 연동 애플리케이션 개발방향을 제시하는 것이다. 연구 방법은 조사연구로 설문지법을 사용하였으며 측정 도구는 기존 스마트 스포츠웨어와 스포츠 애플리케이션의 디자인, 기능성 사용성에 대한 수용태도를 묻는 문항 등으로 구성되었으며, 조사대상은 50세 이상 65세 미만의 베이비부머 집단을 대상으로 진행됐다. 연구결과를 요약하면 다음과 같다. 베이비부머 소비자들은 스마트 스포츠웨어의 기능 및 성능안전성에 대해 긍정적으로 인식하나 관리 및 내구성에 대한 우려가 있어 스마트 스포츠웨어의 내구성 및 편의성 개선방향 및 사후 처리에 대한 고려가 필요하다. 스포츠 애플리케이션의 경우 새로운 정보를 얻을 수 있는 교육적인 기능으로 인식하며, 인지용이성 및 접근성에 대해 젊은 세대에 비하여 어려움을 느끼는 것으로 나타났다. 본 연구 결과를 바탕으로 베이비부머 소비자의 보행운동용 워킹웨어의 디자인 및 기획방향으로는 '일반 스포츠웨어 디자인의 일상적 디자인', '소비자의 선호가 반영된 기능', '관리의 편의성 및 내구성을 높인 디자인' 등을, 보행운동용 애플리케이션의 기획 방향으로는 '쉬운 스포츠 애플리케이션 구성', '교육적 운동 콘텐츠 구성' 등을 제시하였다.

• 한국의류산업학회지
• /
• 제23권2호
• /
• pp.273-289
• /
• 2021

This study aimed to examine the appearance of heated clothing in relation to fashion trends by analyzing constructive components of clothing using product images and actual products. A total of 91 images of domestic and foreign heated clothing products were collected, and a product analysis conducted with six parameters of item classification, namely, concept and image, silhouette, color, number of heating elements, and heating parts. In addition, an in-depth analysis was carried out with 11 products among them, while focusing on further detailed components of the design and heating system. As a result, the overall exterior design of domestic products has been changed from outdoor clothing to daily clothing reflecting the current design trend. Compared with domestic products, foreign products showed a diverse assortment and a greater number of heating regions per individual item of clothing. The current heating system commonly consists of a heating element, power source, controller board, and wires, although the existence and type of switches differed from product to product. To develop a more efficiently heated clothing to expand the market, the design, ease of use, safety, consumer preference, heating functionality, and durability should be considered. Along with design recommendations for future heated clothing, this study also provides a practical guide to the technical aspects of the design of the components of heated clothing.

• International journal of advanced smart convergence
• /
• 제9권1호
• /
• pp.82-89
• /
• 2020

This study is a design study related to the application of 3D printer technology for garment printing. Knitting, which used to be a home industry in the early days, originally comes from hand-knitting. This evolved with various personal devices as a small job for the self-sufficiency of early European housewives. In addition, since the Industrial Revolution, mechanical production entered the mass production mass supply system, and various apparel products were provided to consumers in accordance with mass standardized dimensions. This is similar to the development process in Korea. In addition, it has formed a considerable market with the situation that it can produce and supply apparel products at low labor costs of first-generation Namdaemun and Dongdaemun merchants. As the production shifted to the Southeast Asian region due to the increase in labor costs in the domestically developed social situation, the production of garment products in Korea is now almost 5%. As a result, apparel-related production facilities and related companies are constantly moving to other countries to move production facilities sensitively due to rising labor costs. Recently, smart factory automation has been planned to explore new possibilities. In addition, in recent years, with the evolved appearance of consumers, the appropriate supply of the right amount of production has appeared, and the 3D printer applied to personal garment output has attracted considerable interest in the customized market. Therefore, in order to become a new hope and a small addition to various clothing workers, this study conducted related research on the following 3D printers for clothing output and attempted to proceed with a new design.

• 한국의류학회지
• /
• 제42권3호
• /
• pp.474-485
• /
• 2018

Smart sensors and connected devices have changed the concept of garments along with IT technology convergent garments that transform the performance of basic functions. Various types of products have been researched and developed due to the increased interest in smart clothing; in addition, studies based on physical and mechanical properties have also been actively studied to improve accuracy and reliability. This study represents a basic study for the development of smart textiles based on motion recognition for the surfing practice of beginners interested in IT convergence type. A physical durability evaluation of conductive yarn according to sewing method was later carried out. This study is a conditional specimen sewn with cotton lower thread and 100mm pattern length based on the results of previous studies. The durability of the conductive yarn according to the sewing method was evaluated according to the sewing method. Durability was evaluated by two kinds of repeated strain and abrasion tests. The specimen with applied cotton in a lower thread zigzag pattern 2mm stitch size 100mm stitch length was shown to have the most suitable durability for smart textile.

• 패션비즈니스
• /
• 제25권5호
• /
• pp.88-98
• /
• 2021

In this study, the characteristics of digital anthropometric methods were determined with case studies. These methods were broadly classified into two categories: non-wearable and wearable. Then, these categories were further classified into four types: 3D Scanning, mobile app, smart clothing, and smart tool Among the non-wearable types, the "3D scanning" technique was based on the use of 3D hardware equipment. With this technique, the body shape was measured and the internal body information was obtained. Therefore, it is used in fields of healthcare and fitness. Among the wearable types, "Smart clothing" involves a special clothing that measures human body and a smartphone application. Both the components are linked to a fashion platform, which is based on the measured sizes that help shoppers. The "Smart tool" has the characteristic of measuring only with smart tools and smartphone applications; it does not involve the measurement of images. The common advantage of digital anthropometric methods are as follows: they reduce the time and cost of measurement by enabling self-measurement. Moreover, simple measurements are used to determine the size of anthropometry. Thereafter, it accumulates this data to track the continuous changes in size. From an industrial point of view, digital anthropometric technology should be used to increase sales. The on-demand market can be expanded as global consumers would throng the Korean fashion market. For the consumer, an avatar should be created to fit the user's size. This would provide a fun experience to the user.

• 복식
• /
• 제58권9호
• /
• pp.166-175
• /
• 2008

For the structural firefighting protective clothing, it can show a synergy effect when it satisfies smart fabric to block off a harmful environmental element and ergonomics design that apply range of motion of human body and appropriate size system. There are various standards about the structural firefighting protective clothing, but it's difficult to find a rule about movement suitability because the performance of the material holds a lot of the rules. Therefore, the purpose of this study is to propose a scheme to evaluate the current structural firefighting protective clothing and to improve movement suitability by research on the actual condition. For this, the survey about wearer acceptability scale on design and size and about improvement requirements was executed gathering firefighters' opinion. Questionnaire was composed with 23 items about satisfaction on current structural firefighting protective clothing, body suitability, movement suitability, improvement requirement and subjective information. As a results, Korean firefighters demand ergonomics design of structural firefighting protective clothing which to minimize restriction of body movement and to maximize body suitability.

• 한국의류학회지
• /
• 제45권2호
• /
• pp.271-284
• /
• 2021

This study presents the educational utility of blended learning by analyzing the effectiveness of learning after class by blending team project learning and smart device app-based learning methods. Qualitative analysis and survey analysis were conducted and the results were as follows. First, team project activities based on task resolution were conducted freely through detailed activities such as sharing roles, planning meetings, and coordinating opinions. Team activities were carried out with respect and consideration, team member bonding, and a sense of responsibility. Second, the smart device app is recognized as a medium for work and communication, and fast feedback has been made, making it highly impactful on classroom activities. Third, in terms of learning satisfaction, most learners showed an interest in the course and were satisfied with the project results. The smart device app was used as a learning and communication medium for personal and team activities and was analyzed as a blended method applicable to classes that conduct practical activities as an efficient tool to further activate project activities.

• 한국의류학회지
• /
• 제46권5호
• /
• pp.760-771
• /
• 2022

This study sought to develop clothing for a companion animal that can provide stable ECG measurements. A pattern for the smart clothing of a companion dog was manufactured using the replica method to select a location and method that best suited the stable measurement of ECG and improved the clothing's fitness. The smart clothing was developed as the following three types: strap type, top type, and combined top and vest type with a detachable wireless ECG monitor. The detection abilities of these were observed using the PQRST rate taken after ECG measurements while the three companion dogs were tested while resting and moving. The results revealed that apart from using an electrode, applying a gel pad is the most effective way to achieve stable ECG measurements, and the central chest region is more reliable than the left armpit for providing steady readings. The combined top and vest type showed the highest average ECG PQRST detection number, meaning that the ECG signal measurement was steady. These results may contribute to the measurement of ECG in smartwear for U-Healthcare to measure other biometric data of a companion dog.