• Composites Research
• /
• 제20권3호
• /
• pp.37-42
• /
• 2007

금속복합재료에서는 강화재와 기지재 사이의 열팽창계수 차이에 의해 복합재료 내부에 잔류응력이 남아있어 복합재료 전체의 강도저하를 가져온다. 본 연구에서는 TiNi 형상기억합금을 강화재료로써 이러한 잔류응력 문제를 해결하기 위하여 이용하였다. TiNi 형상기억합금은 형상기억효과를 이용하여 복합재료의 잔류응력문제를 해결할 뿐만 아니라 복합재료의 인장강도를 증가시키는 역할을 한다. 핫프레스 방법에 의해 제작된 형상기억복합재료의 강도증가를 위하여 냉간압연을 실시하여 실험을 실시하였다. 이와 같이 제작된 형상기억복합재료의 저온에서의 미시적 손상거동을 평가하기 위하여 음향방출기법을 이용하였다. 또한 열충격을 받은 시험편의 손상에 대한 연구도 이루어졌다.

• 한국비블리아학회지
• /
• 제33권1호
• /
• pp.139-166
• /
• 2022

본 연구는 5G 신기술에 가장 민감한 세대의 윤리 행태를 권장하는 일환으로 미래 정보전문가를 희망하는 주체를 위한 윤리 리터러시(Ethics-Literacy) 교육과정모형 개발을 목적으로 한다. 연구 범위의 핵심 주제인 5G 특성, 리터러시, 윤리 쟁점, 6C 역량기반 교육, 이용자 경험 등을 주제어로 최근 5년 이내(2022-2017) 출간된 국내외 학술 연구자료를 조사하고 내용분석으로 최종 86편을 연구대상으로 선정하여 문헌 연구가 진행되었다. 분석 결과가 제시하는 것은 첫째, 기존의 리터러시는 5G 환경에 대응된 네 영역으로 구분될 수 있고 둘째, 분석된 윤리 쟁점은 모든 리터러시 영역에서 보이는 공통 쟁점과 각 리터러시 영역별 특수 쟁점으로 비교 구분되었다. 분석된 결과와 4차 산업혁명 교육방식으로 제시된 6C 역량기반 교육을 바탕으로 대학 차원의 5G 정보환경 정보전문가를 위한 윤리 리터러시 교육과정모형을 개발하여 제시하였다.

• Smart Structures and Systems
• /
• 제29권5호
• /
• pp.661-675
• /
• 2022

In this paper, an electric vehicle drives with efficient control and low cost hardware using four quadrant DC converter with Permanent Magnet Direct Current (PMDC) motor fed by DC boost converter is presented. The main idea of this work is to improve the energy efficiency of the conversion chain of an electric vehicle by inserting a boost converter between the battery and the four quadrant-DC motor chopper assembly. Consequently, this method makes it possible to maintain the amplification gain of the 4 quadrant chopper constant regardless of the battery voltage drop and even in the presence of a fault in the battery. One of the most important control problems is control under heavy uncertainty conditions. The higher order sliding mode control technique is introduced for the adjustment of DC bus voltage and mechanical motor speed. To implement the proposed approach in the automotive field, experimental tests were carried out. The performances obtained show the usefulness of this system for a better energy management of an electric vehicle and an ideal control under different operating conditions and constraints, mostly at nominal operation, in the presence of a load torque, when reversing the direction of rotation of the motor speed and even in case of battery chamber failure. The whole system has been tested experimentally and its performance has been analyzed.

• 예술인문사회 융합 멀티미디어 논문지
• /
• 제8권3호
• /
• pp.279-288
• /
• 2018

본 논문에서는 네팔(Nepal)의 6개 시범 초등학교를 대상으로 유러닝 박스(U-Learning Box)와 유비쿼터스 기반의 시험(UBT, Ubiquitous-based Test) 시스템을 이용한 교육 혁신 사례 연구 성과를 소개하고 있다. 전력 공급 사정이 열악한 네팔 국가의 현실을 고려할 때 작고 이동성이 용이한 교사용 태블릿 PC와 자체 배터리를 가진 소형 스마트 빔으로 구성된 유러닝 박스가 시범 초등학교를 대상으로 지속적인 기초 영어 교육과 보건 위생 교육을 지원하는 최적의 솔루션으로 평가되었다. 그리고 태블릿 PC를 이용한 UBT 기술을 이용해 시범 초등학교 학생들의 기초 영어 학습 능력을 평가하고 분석함으로써 이를 토대로 한 교육 환경 개선 및 현지 수준에 적합한 교육 콘텐츠의 개발이 필요함을 인식하게 되었다. 이러한 유러닝 박스와 UBT 기술을 이용한 글로벌 교육 혁신 사례는 네팔 뿐만 아니라 기초 교육 환경이 열악한 개발도상국들을 대상으로 하는 글로벌 교육 기회 평등 프로젝트의 성공 모델로 자리 잡을 것으로 기대한다.

• 산업경영시스템학회지
• /
• 제46권2호
• /
• pp.133-142
• /
• 2023

The large process plant is currently implementing predictive maintenance technology to transition from the traditional Time-Based Maintenance (TBM) approach to the Condition-Based Maintenance (CBM) approach in order to improve equipment maintenance and productivity. The traditional techniques for predictive maintenance involved managing upper/lower thresholds (Set-Point) of equipment signals or identifying anomalies through control charts. Recently, with the development of techniques for big analysis, machine learning-based AAKR (Auto-Associative Kernel Regression) and deep learning-based VAE (Variation Auto-Encoder) techniques are being actively applied for predictive maintenance. However, this predictive maintenance techniques is only effective during steady-state operation of plant equipment, and it is difficult to apply them during start-up and shutdown periods when rises or falls. In addition, unlike processes such as nuclear and thermal power plants, which operate for hundreds of days after a single start-up, because the pumped power plant involves repeated start-ups and shutdowns 4-5 times a day, it is needed the prediction and alarm algorithm suitable for its characteristics. In this study, we aim to propose an approach to apply the optimal predictive alarm algorithm that is suitable for the characteristics of Pumped Storage Power Plant(PSPP) facilities to the system by analyzing the predictive maintenance techniques used in existing nuclear and coal power plants.

• Smart Structures and Systems
• /
• 제32권1호
• /
• pp.1-7
• /
• 2023

In modal analysis, the mode shape reflects the vibration characteristics of the structure, and thus it is widely performed for finite element model updating and structural health monitoring. Generally, the acceleration-based mode shape is suitable to express the characteristics of structures for the translational vibration; however, it is difficult to represent the rotational mode at boundary conditions. A tilt sensor and gyroscope capable of measuring rotational mode are used to analyze the overall behavior of the structure, but extracting its mode shape is the major challenge under the small vibration always. Herein, we conducted a feasibility study on a multi-mode shape estimating approach utilizing a single physical quantity signal. The basic concept of the proposed method is to receive multi-metric dynamic responses from two sensors and obtain mode shapes through bridge loading test with relatively large deformation. In addition, the linear transformation matrix for estimating two mode shapes is derived, and the mode shape based on the gyro sensor data is obtained by acceleration response using ambient vibration. Because the structure's behavior with respect to translational and rotational mode can be confirmed, the proposed method can obtain the total response of the structure considering boundary conditions. To verify the feasibility of the proposed method, we pre-measured dynamic data acquired from five accelerometers and five gyro sensors in a lab-scale test considering bridge structures, and obtained a linear transformation matrix for estimating the multi-mode shapes. In addition, the mode shapes for two physical quantities could be extracted by using only the acceleration data. Finally, the mode shapes estimated by the proposed method were compared with the mode shapes obtained from the two sensors. This study confirmed the applicability of the multi-mode shape estimation approach for accurate damage assessment using multi-dimensional mode shapes of bridge structures, and can be used to evaluate the behavior of structures under ambient vibration.

• Smart Structures and Systems
• /
• 제32권1호
• /
• pp.23-35
• /
• 2023

Steel bolted joint is an important part of steel structure, and its damage directly affects the bearing capacity and durability of steel structure. Currently, the existing research mainly focuses on the identification of corroded bolts and corroded bolts respectively, and there are few studies on multiple states. A detection framework of corroded and loosened bolts is proposed in this study, and the innovations can be summarized as follows: (i) Vision Transformer (ViT) is introduced to replace the third and fourth C3 module of you-only-look-once version 5s (YOLOv5s) algorithm, which increases the attention weights of feature channels and the feature extraction capability. (ii) Three states of the steel bolts are considered, including corroded bolt, bolt missing and clean bolt. (iii) Line segment detector (LSD) is introduced for bolt rotation angle calculation, which realizes bolt looseness detection. The improved YOLOv5s model was validated on the dataset, and the mean average precision (mAP) was increased from 0.902 to 0.952. In terms of a lab-scale joint, the performance of the LSD algorithm and the Hough transform was compared from different perspective angles. The error value of bolt loosening angle of the LSD algorithm is controlled within 1.09%, less than 8.91% of the Hough transform. Furthermore, the proposed framework was applied to fullscale joints of a steel bridge in China. Synthetic images of loosened bolts were successfully identified and the multiple states were well detected. Therefore, the proposed framework can be alternative of monitoring steel bolted joints for management department.

• Wind and Structures
• /
• 제36권3호
• /
• pp.201-213
• /
• 2023

In this study, the effect of sea surface temperature (SST) on the distribution of vertical wind speed in the atmospheric boundary layer of coastal areas was analyzed. In general, coastal areas are known to be more susceptible to various meteorological factors than inland areas due to interannual changes in sea surface temperature. Therefore, the purpose of this study is to analyze the relationship between sea surface temperature (ERA5) and wind resource data based on the meteorological mast of Høvsøre, the test bed area of the onshore wind farm in the coastal area of Denmark. In addition, the possibility of coastal disasters caused by abnormal vertical wind shear due to changes in sea surface temperature was also analyzed. According to the analysis of the correlation between the wind resource data at met mast and the sea surface temperature by ERA5, the wind speed from the sea and the vertical wind shear are stronger than from the inland, and are vulnerable to seasonal sea surface temperature fluctuations. In particular, the abnormal vertical wind shear, in which only the lower wind speed was strengthened and appeared in the form of a nose, mainly appeared in winter when the atmosphere was near-neutral or stable, and all occurred when the wind blows from the sea. This phenomenon usually occurred when there was a sudden change in sea surface temperature within a short period of time.

• 한국콘텐츠학회논문지
• /
• 제22권5호
• /
• pp.247-260
• /
• 2022

본 연구는 출판문화산업 활성화를 위해 도서자판기를 편의점에 설치하여 유통채널을 확장시키는 방안에 관한 연구이다. 먼저 편의점의 의미와 도서자판기의 개념을 정립한 후 편의점 내 도서자판기 설치 및 운영 필요성을 도출하였다. 편의점 시스템을 이용하여 도서판매의 공정성과 투명성을 제고할 것이며, 출판업계와 편의점업계 사이의 아웃소싱, 소비자를 위한 옴니채널 서비스 확대, 고객 만족도를 높이기 위한 고객 경험가치 제공 등을 추진할 것이다. 도서자판기의 구성은 스마트 도서관 형태의 자판기로 운영하며 키오스크 프로그램에 유니버설 디자인을 적용한다. 이러한 과정을 도식화하였고 실질적인 운영방안을 모색하기 위해 성인 310명을 대상으로 설문조사를 시행하였다. 향후 편의점 도서자판기 설치와 같이 출판물의 판매 및 유통채널을 다변화하는 연구를 통해 출판문화산업 활성화에 따른 국민 1인당 독서량 증가로 국민의 독서환경이 증진될 수 있기를 기대하는 바이다.

• International Journal of Computer Science & Network Security
• /
• 제23권7호
• /
• pp.155-164
• /
• 2023

Machine learning with its high precision algorithms, Precision agriculture (PA) is a new emerging concept nowadays. Many researchers have worked on the quality and quantity of PA by using sensors, networking, machine learning (ML) techniques, and big data. However, there has been no attempt to work on trends of artificial intelligence (AI) techniques, dataset and crop type on precision agriculture using internet of things (IoT). This research aims to systematically analyze the domains of AI techniques and datasets that have been used in IoT based prediction in the area of PA. A systematic literature review is performed on AI based techniques and datasets for crop management, weather, irrigation, plant, soil and pest prediction. We took the papers on precision agriculture published in the last six years (2013-2019). We considered 42 primary studies related to the research objectives. After critical analysis of the studies, we found that crop management; soil and temperature areas of PA have been commonly used with the help of IoT devices and AI techniques. Moreover, different artificial intelligence techniques like ANN, CNN, SVM, Decision Tree, RF, etc. have been utilized in different fields of Precision agriculture. Image processing with supervised and unsupervised learning practice for prediction and monitoring the PA are also used. In addition, most of the studies are forfaiting sensory dataset to measure different properties of soil, weather, irrigation and crop. To this end, at the end, we provide future directions for researchers and guidelines for practitioners based on the findings of this review.