• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.2
• /
• pp.372-377
• /
• 2016

Communication flow is changing rapidly. Recently, a range of wearable devices such as wearable glasses and wearable watch, have been launched. These kinds of wearable devices help people to live a more comfortable life. Wearable devices most have an antenna for wireless communication. This paper reports a transparent antenna that is made of an optically transparent material for wearable glasses. Transparent antenna can be applied to smart windows and will not disturb the view of user. IZTO/Ag/IZTO multilayer electrode has higher electrical and optical properties. This antenna is available because of its good electrical properties. This study measured the performance of the proposed transparent antenna, which is made of a multilayer electrode, applied to a lens. The proposed antenna was simulated with several substrates. The antenna impedance was matched with length and width of the antenna. The antenna's conductivity and transparency was measured using a HMS-3000 and UV-spectrometer. A 40nm thick Ag single layer antenna was fabricated on a flexible polyimide substrate for comparing the antenna performances. The fabricated antenna is useable at a frequency of 2.4-2.5GHz, which is suitable for Wifi communications and has peak gain of 2.89dBi and an efficiency of 34%.

• Journal of Digital Convergence
• /
• v.15 no.5
• /
• pp.207-215
• /
• 2017

With rapid development of IT technology and biotechnology, human lifespan is extended rapidly, and we are living in the era where aging becomes the social issue. Due to this aging problem, manpower is mainly replaced by Automated Guided Vehicles (AGV) in manufacturing factories or warehouse logistics transportation. Rate of AGV use increases sharply every year. AGVs, which were used only in Smart Factories, extends its usage into indoor and outdoor operation by changing their usages to container transportation that can carry huge containers in the harbor. With the expansion of AGVs usage, the importance of RCS (Remote Control System) is also increased. In this study, we surveyed and analyzed the characteristics and technology trends of technical features of AGV's RCS that are developing in various ways to establish quality evaluation system of AGV RCS. Based on this, and by referring to international quality assessment standards, ISO/IEC 25000 series, we derived evaluation items on functional suitability and usability to secure reliability of AGV RCS. Also, it is our intention to develop evaluation model using those derived usability and reliability evaluation items.

• Journal of Energy Engineering
• /
• v.24 no.2
• /
• pp.129-143
• /
• 2015

Increasing concerns on climate change and energy security accelerated policies to reduce green-house gas emission, especially from the transportation sector. Electric vehicle (EV) has been on the spotlight to deal with such environmental issue and V2G (Vehicle-to-Grid) technology began to draw attentions as an alternative to reduce ownership costs while contributing to an efficient and decentralized power grid. This study conducts a scenario analysis on total cost of ownership of EV under V2G scheme and compare with non-V2G EV and Internal Combustion Engine (ICE) vehicle. As result, V2G service is expected to provide an annual average profit of $210 to EV users willing to reverse flow its residual power in the battery. The profit from V2G service leaves a margin of $4,530 over operational lifetime, compared with $2,420 cost of charge for non-V2G EV. In summary, total cost of ownership of V2G-capable EV was 6.2% less than non-V2G EV and 10.2% higher than ICE vehicle. The results confirm a comparative economic advantage of operating EV under V2G scheme. Increased number of EVs with V2G service has shown to provide positive effects to power industry for valley filling in load distribution, thus, favorably increasing the overall economic feasibility.

• Journal of Sensor Science and Technology
• /
• v.7 no.1
• /
• pp.31-38
• /
• 1998

Multi-channel sensors can be used to increase the reliability and remove the random iloise in ion-sensitive field effect transistors(ISFETs). Multi-channel sensors is also an essential step toward potential fabrication of sensors for several ionic species in one device. However, when the multi-channel sensors are separately biased, the biasing problems become difficult, that is to say, the bias circuit is needed as many sensors. In this work, a circuit for biasing the four pH-ISFETs in null-balance method, where bias voltages are switched, was proposed. The proposed concept is need only one bias circuit for the four sensors. Therefore it has advantages of smaller size and lower power consumption than the case that all sensors are separately biased at a time. The proposed circuit was tested with discrete devices and its performance was investigated. In the recent trend, sensor systems are implemented as portable systems. So the verified measurement circuit was integrated by using the CMOS circuit. Fortunately, ISFET fabrication process can be compatible with CMOS process. Full circuit has a mask area of $660{\mu}m{\times}500{\mu}m$. In the future, this step will be used for developing the smart sensor system with ISFET.

• Journal of Embryo Transfer
• /
• v.13 no.3
• /
• pp.301-312
• /
• 1998

To efficiently separate a protein stimulating sperm swim-up migration and movement from follicular proteins, the effect of paper chromatography and liquid chromatography with reverse phase column and superose column on protein separation was examined. And the results obtained were as follows; 1. The band component that was separated with paper chromatography stimulated sperm migration and movement depending on its additional levels. Especially, band I component significantly increased sperm migration. But, all components of bands 1, 2 and 3 showed lower sperm migration and movement, compared to follicular fluid at the same additional level. 2. Among the components separated from follicular protein of 2~5mm follicles with reverse phase column ($\mu$RPC), components at retention time (RT) of 3.33, 7.00, 13.87, and 16.6A minutes stimulated sperm migration within a limited range. 3. All components separated from follicular protein of 10mm follicles with $\mu$RPC column didn't stimulate sperm migration and movement. 4. Among the components separated from follicular protein of 2~5m follicles with superose column, components at retention volume (RV) of 1.35 and 0.82 ml significantly stimulated sperm migration and movement. In conclusion, protein components stimulating sperm migration and movement were efficiently separated with superose column in Smart system. Especially, components of RV 1.35 and RV0.82 stimulated sperm swim-up separation.

• Journal of Korean Society of Transportation
• /
• v.34 no.2
• /
• pp.146-157
• /
• 2016

The objective of this study is to actualize a statistical model of the 3-detector simplification model, which was proposed to detect outbreak situations by Daganzo in 1997 and to verify the statistical appropriacy thereof. This study presents the calculation process of the 3-detector simplification model and realizes the process using a statistics program. Firstly, the model was applied using data on detector of the main highways on which there is no entrances or exits. Moreover, in order to statistically verify the 3-detector simplification model, accumulative traffics for 30 seconds period, which reflects the dynamic changes of traffics due to shock wave, were estimated for outbreak traffics and steady flow, and the error of acquired data was statistically compared with that of the actual accumulative traffics. As a result, the error ratio between steady and incident cumulative flows has reached its maximum after 2-3 hours from an accident. Moreover, the incident traffic flows by accidents and the stade flows are heterogeneous in terms of their dispersion and means.

• Journal of Korean Society of Transportation
• /
• v.35 no.5
• /
• pp.458-467
• /
• 2017

The expressway of the Korea has an important role in freight movement because 76 percent of the commodity is transported by trucks. However, there has been few indices on the role of expressways regarding freight transportation and truck traffic. The objective of this study is to propose four freight transportation related indices using ITS-related system such as TCS and HS-Wim: total truck's travel miles ($veh{\cdot}km/year$), total freight transport miles ($ton{\cdot}km/year$). efficiency of truck's travel ($veh{\cdot}km/km$), and efficiency of freight movement ($ton{\cdot}km/km$). These truck and freight related indices were estimated and compared by two different data sources: traffic volume data using VDS and OD data using TCS. These indices were designed to estimated on real time and updated every day and month.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.246-246
• /
• 2012

Smart catalyst design though novel catalyst preparation methods can improve catalytic activity of transition metals on reducible oxide supports such as titania by enhancement of metal oxide interface effects. In this work, we investigated Pt nanoparticles/titania catalysts under CO oxidation reaction by using novel preparation methods in order to enhance its catalytic activity by optimizing metal oxide interface. Arc plasma deposition (APD) and metal impregnation techniques are employed to achieve Pt metal deposition on titania supports which are prepared by multi-target sputtering and Sol-gel techniques. In order to tailor metal-support interface for catalytic CO oxidation reaction, Pt nanoparticles and thin films are deposited in varying surface coverages on sputtered titania films using APD. To assess the role of oxide support at the interface, APD-Pt is deposited on sputtered and Sol-gel prepared titania films. Lastly, characteristics of APD-Pt process are compared with Pt impregnation technique. Our results show that activity of Pt nanoparticles is improved when supported over Sol-Gel prepared titania than sputtered titania film. It is suggested that this enhanced activity can be partly ascribed to a very rough titania surface with the higher free metal surface area and higher number of sites at the interface between the metal and the support. Also, APD-Pt shows superior catalytic activity under CO oxidation as compared to Pt impregnation on sputtered titania support. XPS results show that bulk oxide is formed on Pt when deposited through impregnation and has higher proportion of oxidized Pt in the form of $Pt^{2+/4+}$ oxidation states than Pt metal. APD-Pt shows, however, mild oxidation with large proportion of active Pt metal. APD-Pt also shows trend of increasing CO oxidation activity with number of shots. The activity continues to increase with surface coverage beyond 100%, thus suggesting a very rough and porous Pt films with higher active surface metal sites due to an increased surface area available for the reactant CO and $O_2$ molecules. The results suggest a novel approach for systematic investigation into metal oxide interface by rational catalysts design which can be extended to other metal-support systems in the future.

• Journal of Biosystems Engineering
• /
• v.42 no.4
• /
• pp.314-322
• /
• 2017

Purpose: This study was conducted to investigate the hot air drying characteristics of squash slices depending on the drying conditions (input air velocity, input air temperature, and sample thickness). Methods: The developed drying system was equipped with a controllable air blower and electric finned heater, drying chamber, and ventilation fan. Squash (summer squash called Korean zucchini) samples were cut into slices of two different thicknesses (5 and 10 mm). These were then dried at two different input air temperatures (60 and $70^{\circ}C$) and air velocities (5 and 7 m/s). Six well-known drying models were tested to describe the experimental drying data. A non-linear regression analysis was applied to determine model constants and statistical indices such as the coefficient of determination ($R^2$), reduced chi-square (${\chi}^2$), and root mean square error (RMSE). In addition, the effective moisture diffusivity ($D_{eff}$) was estimated based on the curve of ln(MR) versus drying time. Results: The results clearly showed that drying time decreased with an increase in input air temperature. Slice thickness also affected the drying time. Air velocity had a greater influence on drying time at $70^{\circ}C$ than at $60^{\circ}C$ for both thicknesses. All drying models accurately described the drying curve of squash slices regardless of slice thickness and drying conditions; the Modified Henderson and Pabis model had the best performance with the highest R2 and the lowest RMSE values. The effective moisture diffusivity ($D_{eff}$) changes, obtained from Fick's diffusion method, were between $1.67{\times}10^{-10}$ and $7.01{\times}10^{-10}m^2/s$. The moisture diffusivity was increased with an increase in input air temperature, velocity, and thickness. Conclusions: The drying time of squash slices varied depending on input temperature, velocity, and thickness of slices. The further study is necessary to figure out optimal drying condition for squash slices with retaining its original quality.

• Journal of Internet Computing and Services
• /
• v.12 no.6
• /
• pp.171-187
• /
• 2011

Due to the vitalization of the smart phones, mobile revolution has been started. The mobile revolution has elevated SNS service, which was once considered as just one of many communication tools, to the single most important communication method as well as diffusion of social commerce. Yet, there has not been an adequate study of the roles of SNS in the domestic social commerce market, which has gotten a lot of spotlights. Therefore, the purpose of this study is to investigate the influence of various characteristics of social commerce that it has an impact on the purchase intension as well as the moderating effects of SNS. For these purposes, this study has drawn up the characteristics of social commerce in cost cutting, impulse buy, social influence, decision support, word of mouth effect and etc. to prove the interaction effect of SNS. The regression analysis showed that the characteristics of all the social commerce are related to the dependent variable. As a result of drawing up the interaction effect of SNS, it has shown that the cost cutting and word of mouth have significant influence in the social commerce diffusion as the usage of SNS increased. In conclusion, the main implication of this study is to provide the basic grounds for social commerce business strategy as it investigated the characteristics of SNS and its relation.